Analog Electronics Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Analog Electronics

Total 39 training courses and degree programs available around the world.

Analog Electronics

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: College of the North Atlantic
Training Center(s)/Venue(s): Bonavista, Carbonear, Clarenville, Gander, Labrador City, St. Anthony, St. Johns, Stephenville, Canada

This course will include the description, operation, and application of simple electronic components and their use in linear power supplies, small signal amplifiers, and power amplifiers. An introduction to frequency response is also covered. Design and troubleshooting skills are emphasized.


Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Oklahoma State University - Oklahoma City
Training Center(s)/Venue(s): Oklahoma City, United States

A summarization of topics covered in the electronics
curriculum including ADC, DAC, operational
amplifiers, dynamic circuit analysis and physics.
This course will include Laplace Transforms,
transfer functions and DC motors used to form a
closed loop system. PID control theories will be
examined to show how an analog system can be
controlled by a digital device such as a computer.
Lab: three hours per week.


Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Holmesglen
Training Center(s)/Venue(s): Chadstone, Melbourne, Moorabbin, Waverley, Australia

Develop the theoretical and practical knowledge gained from Electronics For Beginners. Learn to make measurements on AC/DC electronic circuits, identify semiconductors and understand analogue and digital integrated circuits. Other topics include magnetism, drawing and wiring diagrams and interfacing sensors into electronic circuits

Students will: Use a test meter to measure AC and DC voltage, current and resistance and an Oscilloscope to measure waveforms. Learn semi conductors theory looking at the operating characteristics of diodes and transistors Look at the operation of analogue and digital integrated circuits Learn about the effects of magnetism and its use in electronics Learn the theory of operation of AC and DC Electric motors Learn how to draw Circuit diagrams and block diagrams Learn the purpose and operation of sensors and pilot devices


Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Camden Haven Community College
Training Center(s)/Venue(s): Laurieton, Australia

Have you ever wondered what it is all
about? No previous knowledge is
needed �just your curiosity. Join this
group for practical demonstrations
supported by some theory, with
participation in experiments. Circuits, early
computer technology, resistors, semi conductors,
current, switches, brain-teasers and more. Can
Energy be stored in a magnetic field or an electric
field? The answers might surprise!

Electronics Technology (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: NMSU Grants
Training Center(s)/Venue(s): Grants, United States

Our degrees for Electronics

Associate in Applied Science:
Electronics Technology

Electrical Trades
Electronics Technology

Electronics Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: NMSU Alamogordo
Training Center(s)/Venue(s): Alamogordo, United States

The Associate in Applied Science in Electronics Technology prepares the graduate for an entry-level position in the electronics
industry. Employment opportunities include a wide range of careers in research and development, computer service, manufacturing, and
communication industries. Electronic technicians develop, manufacture, and service electronic equipment using sophisticated measuring and
diagnostic equipment. Students may apply the associate’s degree coursework to a Bachelor’s Degree in Engineering Technology (Electronics
program) offered at NMSU Las Cruces.

Analog Electronics

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: North Carolina State University
Training Center(s)/Venue(s): Raleigh, United States

Analog integrated circuits and analog integrated circuit design techniques. Review of basic device and technology issues Comprehensive coverage of MOS and Bipolar operational amplifiers. Brief coverage of analog-to-digital conversion techniques and switched-capacitor filters. Strong emphasis on use of computer modeling and simulation as design tool. Students required to complete an independent design project.

Electronics and Communications

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Ateneo de Naga University
Training Center(s)/Venue(s): Naga City, Philippines

The Electronics and Communications curriculum provides knowledge and skills in Mathematics, Physics, Chemistry and Allied Sciences. The curriculum provides the student with the fundamentals of electronics and communications that will allow the student to be globally competitive in industry or in graduate work and research.

The curriculum contains language courses, social sciences, humanities and Jesuit core courses to produce graduates who are wholistic (with spiritural, moral and ethical values and concern of the environment).

Electronics (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: AEC Business School
Training Center(s)/Venue(s): Bangalore, Chennai, Cochin, Coimbatore, Mumbai, New Delhi, Madurai, India

This course is positioned to be in line with industry goals and trends. It provides you with a solid foundation in the principles and applications of electronic devices, circuits, and systems, so as to equip you to meet the changing needs of the industry.

Special emphasis is placed on Internet technology and networking, embedded systems, and communication and control. You will also develop effective communication skills for the workplace, skills in project planning, and an appreciation of quality techniques. Apart from the fundamental training, this course also keeps its training current and relevant through the many industry-accredited or certified modules offered.

To be better prepared for the advancements in technology, final-year students will choose to take one of the following Elective Options, each of which comprises at least five subjects. These Elective Options are: Aerospace Electronics, Programming & Networking, Mobile Computing, Photonics, or Robotics.

Career Opportunities
Electronics forms part of the everyday operation of homes, fact... [Read More]


Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Waikato
Training Center(s)/Venue(s): Hamilton, New Zealand

Electronics covers a wide range of exciting modern developments ranging from microscopic electronic circuits and machines, mobile and computer communications, to advances in medical diagnosis and treatment, and development in the latest audio and video technologies.

Studying electronics will give you valuable skills in electronic engineering and design. You will have the option to specialise in some of the most progressive areas in electronics today such as optoelectronics or mechatronics.

Optoelectronics deals with the conversion of electrical signals to light or vice-versa. Examples such as solar cells, fibre optics and lasers are integral components of everyday devices like compact disc players, supermarket barcode scanners and long distance systems.

Mechatronics combines aspects of electronic and mechanical engineering to produce devices such as printers, cars, aircraft, photocopiers, and even washing machines. Optoelectronics and Mechatronics are fast-growing areas in which you can develop a productive and satisfying career.

Electronics: Analogue System Design

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Edinburgh
Training Center(s)/Venue(s): Edinburgh, United Kingdom

This programme provides a solid theoretical foundation in electronics, plus practical laboratory experience using analogue systems designed for teaching purposes. It also covers simulation and CAD, as well as advanced topics at the cutting edge of research.

Your independent research project will involve innovative analogue chip or system design.

Programme structure
This programme is run over 12 months, with two semesters of taught courses followed by a research project leading to a masters thesis.

Semester 1 courses
Analogue IC Design
Analogue VLSI A
Principles of Microelectronic Devices
Discrete-Time Signal Analysis
Power Electronics

Electronics Technology (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Massachusetts Lowell
Training Center(s)/Venue(s): Lowell, United States

The Certificate Program in Electronics Technology is designed to provide the students with a broad-based knowledge of circuit theory and electronics, with laboratory work included to ensure that good hands-on experience is acquired along with the deep understanding of fundamental and changing technologies. All the courses in this certificate program can be applied towards the A.S. or B.S. degree in Electronic Engineering Technology.

Electronic Systems (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Warwick
Training Center(s)/Venue(s): Coventry, United Kingdom

This programme enables you to develop your understanding of modern Electronic Systems, focussing on system modelling, instrumentation, power electronics, microsystems, wireless communication, optical sensors, ultrasonics and signal processing. Covering many of the fundamental methods, the MSc enables you to acquire new skills with practical experience within fields as diverse as medicine, automotive and space.

Many of our students have progressed to employment within the electronic systems and sensor field, covering automotive, aerospace, manufacturing and power generation. Others have gone on to higher level research studies in Electronic Systems.

Electronics Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Mississippi Gulf Coast Community College
Training Center(s)/Venue(s): Gautier, United States

Electronics Technology is an instructional program which prepares individuals to support electrical engineers and other professionals in the design, development, and testing of electrical circuits, devices, and systems. Included are instruction in model and prototype development and testing systems analysis and integration including design, development of corrective and preventive maintenance techniques; application of engineering data; and the preparation of reports and test results.

The purpose of the Electronics Technology curriculum is to provide technical knowledge and skills that will allow students to become world-class electronics technicians. This curriculum leads to an Associate in Applied Science Degree and is preparatory for employment upon graduation from the Mississippi Gulf Coast Community College. Where a transfer to a senior college or university is desired, a conference should be scheduled with a community college guidance counselor for advisement.

Electronics Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Massasoit Community College
Training Center(s)/Venue(s): Canton, United States

Electronics is a dynamic and ever expanding industry. It is a field, which extends into many technological areas. For example electro-mechanical devices and systems are found in a vast number of industries. In order to fulfill industrial needs, students in this program receive thorough training in electro-mechanical devices, hydraulic, and process control systems. In addition, the telecommunications industry is the bridge connecting the students of today with the ever-expanding technology of tomorrow. It is in this area that businesses will compete, merge and redefine the market to meet radically changing industry needs and to offer consumer services. Consequently, students are trained in the essential knowledge and skills needed to work in the development, installation, and the maintenance of automated systems. Graduates of the Electronics Technology Program can expect to enter the labor market as electrical technicians with strong backgrounds in basic electricity and electronics and will be able to function in a variety of areas required by employment in the construction ... [Read More]

Electrical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Lehigh Carbon Community College
Training Center(s)/Venue(s): Schnecksville, Allentown, Nesquehoning, Tamaqua, United States

Upon successful completion of this program, graduates will be able to:
� use electrophysical sensors to measure such conditions as light, heat, pressure, and motion to control and operate power devices.

� design ladder diagrams to provide specific control sequences using solenoid pneumatic and hydraulic valves for a given control problem.

� interpret commercial and industrial electrical blueprints.

� design ladder diagrams to provide specific logic functions for a given industrial control problem.

� demonstrate effective communication skills by writing technical reports based on laboratory experiences.

� demonstrate critical thinking/problem solving abilities by analyzing a nonfunctioning electrical circuit, determining the problem, and restoring circuit operation.

� demonstrate interpersonal relations, teamwork, and work ethics through group laboratory projects.

� demonstrate an ability to use and apply mathematical quantitative reasoning to design basic functional electronic circuits.

� demonstra... [Read More]

Basic Electronics (Casino) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Lake Superior College
Training Center(s)/Venue(s): Duluth, United States

Technology is always improving and changing, making a career in electronics exciting and challenging. Electronic Engineering Technicians work in a wide variety of ways and in many different industries.

Basic Electronics

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Professional Career Development Institute
Training Center(s)/Venue(s): Norcross, United States

Electronics school covers the following:
Basic Electrical Concepts
Altering Current and Transformers
Diodes and Rectification
Capacitors and DC Filtering
Transistors and Voltage Regulation
Audio Amplification
Power Control Devices and Circuits
Integrated Circuits
Digital Electronics and Computers
Resonance and IC Filters
Diagnosing Analog and Audio Circuits
Diagnosing Pulse and Digital Circuits

Electronics Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Pikes Peak Community College
Training Center(s)/Venue(s): Colorado Springs, United States

This degree program prepares students with technical job entry skills as electronics technicians. Graduates become qualified to work in electronic automation and in control systems environments. Measurement, instrumentation, control systems automation and industrial robotics are work-related areas for career path employment.

Maximizing student success in the electronic program is the department goal. The program faculty recommends that students develop the following desirable skill and knowledge foundations to enhance student success:
•advanced college level study skills
•working knowledge of algebraic principles and basic trigonometric functions
•college-level reading and comprehension skills
•working knowledge and application of college-level English
•demonstrated time management skills
•awareness of workplace utilization of self-management work teams
•basic understanding of physics principles
•keyboarding, mouse, and MS Windows experience
•understanding of basic science and physics principles

Analog Electronics Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Pickens Technical College
Training Center(s)/Venue(s): Aurora, United States

Course descriptions about Analog Electronics Technician is available on request. Please contact Pickens Technical College by submitting the training request form.

Pages: 1 2

Find Analog Electronics training courses, certificates, diplomas and degrees in Countries:

Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States

If you want to post any message on this website, please do not include your real name, phone number, email address in the message body area. You should enter them in line text boxs respectively, if needed.

Analog Electronics
- Online/E-learning -
Analog Electronics
Ask for Training
Add Courses