Assembly Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Assembly




Total 102 training courses and degree programs available around the world.

Assembly & Rigging

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers the methods and procedures used to maintain an aircraft in aerodynamically and structurally sound condition. Flight theory, aircraft assembly, jacking, structural alignment, rigging of fixed/rotor-wing aircraft, balancing and rigging of flight control surfaces are also included.

Autodesk Inventor: Advanced Assembly Modeling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Exceed Media
Training Center(s)/Venue(s): Toronto, Canada
  V

Inventor Advanced Assembly Modeling builds on the skills acquired in the Inventor Introduction to Solid Modeling and Advanced Part Modeling training guides to take students to a higher level of productivity creating and working with assemblies in Inventor.

Our training guide begins by discussing the concept of Top-Down Design for assembly creation. Planning the assembly using the top-down design approach helps create clean, reusable geometry that interacts as expected with the rest of the assembly. This training guide covers the Inventor tools available for Top-Down Design, and other advanced assembly features aimed at increasing design efficiency, including Positional and Level of Detail Representations (including substitute), iMates and iAssemblies, Frame Generator, Design Accelerator and file management techniques.

Prerequisites:
The class assumes a mastery of Inventor basics as taught in Inventor Introduction to Solid Modeling. Inventor Advanced Part Modeling is recommended, though not required.

Course outline note: The curricula b... [Read More]

Autodesk Inventor: Advanced Assembly Modeling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Future Media Concepts Toronto
Training Center(s)/Venue(s): Toronto, Canada
  V

DAY 1

Chapter 1: Introduction to Top-Down Design
•Top-Down Design
•Top-Down Design Technique
•Top-Down Design Tools

Chapter 2: Assembly Parts and Features
•Assembly Parts
•Assembly Features

Chapter 3: Associative Links and Adaptive Parts
•Associative Links
•Adaptive Assembly Parts

Chapter 4: Skeleton Models &, Derived Components
•Skeleton Models
•Working with Skeletons
•Derived Components
•Modify Derived Components

Chapter 5: Applying Motion with Constraints
•Driving Constraints
•Motion Constraints
•Transitional Constraints

DAY 2

Chapter 6: iMates
•iMates

Chapter 7: Positional Representations
•Introduction to Positional Representations
•Create and Edit Positional Representations
•Using a Positional Representation

Chapter 8: Level of Detail Representations
•Level of Detail Representations
•System-Defined Level of Detail Representations
•User-Defined Le... [Read More]

Autodesk Inventor: Advanced Assembly Modeling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Future Media Concepts, Inc.
Training Center(s)/Venue(s): Boston, Chicago, Irvine, New York City, Orlando, Philadelphia, Phoenix, Washington DC, United States
  V

DAY 1

Chapter 1: Introduction to Top-Down Design
•Top-Down Design
•Top-Down Design Technique
•Top-Down Design Tools

Chapter 2: Assembly Parts and Features
•Assembly Parts
•Assembly Features

Chapter 3: Associative Links and Adaptive Parts
•Associative Links
•Adaptive Assembly Parts

Chapter 4: Skeleton Models &, Derived Components
•Skeleton Models
•Working with Skeletons
•Derived Components
•Modify Derived Components

Chapter 5: Applying Motion with Constraints
•Driving Constraints
•Motion Constraints
•Transitional Constraints

DAY 2

Chapter 6: iMates
•iMates

Chapter 7: Positional Representations
•Introduction to Positional Representations
•Create and Edit Positional Representations
•Using a Positional Representation

Chapter 8: Level of Detail Representations
•Level of Detail Representations
•System-Defined Level of Detail Representations
•User-Defined Le... [Read More]

CompTIA A+ PC Assembly and Troubleshooting (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: GlobalKnowledge PH, Inc.
Training Center(s)/Venue(s): Mandaluyong City, Philippines

GlobalKnowledge inviting you to attend...

CompTIA A+ PC Assembly and Troubleshooting Training
Schedule: Jan. 26-30, 2015 | Feb. 2-6, 2015 | March 2-6, 2015
Training Fee: P65, 600

ENROLL NOW!!

Eda Medinaceli
eda.globalknowledgeph@gmail.com
GlobalKnowledge Ph., Inc.
G/F Beacon Plaza cor. Ideal St., Shaw Blvd., Mandaluyong City

Life Safety for Assembly and Education

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: UTA - Division for Enterprise Development
Training Center(s)/Venue(s): Austin, Arlington, Houston, United States
  V

This course provides training on the application of NFPA 101 Life Safety Code?requirements to specific building use based upon the occupancy classification system for Assembly Occupancies. Covers code provisions and requirements for protecting concentrations of occupants in assembly occupancies. - Unique rules for assembly and education occupancies - Occupant load factors - Student fire safety needs - Unique challenges of large numbers of occupants - Exit access Click here to register for the online version.

Electronic and General Assembly (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Douglas College
Training Center(s)/Venue(s): New Westminster, Canada
  V

Students in the Electronic and General Assembly Option receive training that enables them to work in entry-level assembly positions in electronics and other manufacturing industries. The range of skills taught varies for each student, but typically includes:
•electronic component preparation
•printed circuit board assembly
•soldering
•cable and wire preparation
•hardware and general assembly

Job-site placements provide continued training and work experience opportunities through the application of learned skills in manufacturing firms throughout the Lower Mainland.

Assembly, Wrapping & Packaging

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Loyalist College
Training Center(s)/Venue(s): Belleville, Canada

Learn proper techniques for the assembly, wrapping and/or packaging of surgical instruments, supplies and patient care equipment.

Avionics (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: North Seattle Community College
Training Center(s)/Venue(s): Seattle, United States
  V


Avionics I: Wire Assembly Certificate

This certificate is designed to provide students with the basic knowledge, skills and abilities to meet minimum requirements for employment as an entry level wire assembly technician in aerospace-related technologies.

Learning Outcomes
•Identify and apply technical concepts and terms used in the avionics field.
•Perform basic wiring and termination common to avionics.
•Locate, evaluate, and apply relevant information from various sources to address workplace problems.

Pipe Fittings and Pipe Assembly

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Nova Scotia Community College Kingstec Campus
Training Center(s)/Venue(s): Kentville, Canada

Learners will demonstrate knowledge of ferrous piping materials used in the plumbing trade and the ability to join various ferrous piping materials. This course also includes the use of hangers and supports, as they are required for piping systems.

Vehicle Construction Analysis - Teardown and Assembly

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Nova Scotia Community College Akerley Campus
Training Center(s)/Venue(s): Dartmouth, Canada
  V

This course will assist the learner in differentiating between body constructions (conventional, unibody, unitized, semi unitized and space age design automobile). Learners will explore specific members, panel structures, etc. used in vehicle construction and discovers how strength and integrity are achieved in each type. The course will also review the obligations the technicians and employers have to the customer and the liabilities associated with repairs completed safely and to industry standards. Learners will have the opportunity to purchase I-CAR Gold Class industry points.

Public Assembly Facility Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Johnson & Wales University Providence Campus
Training Center(s)/Venue(s): Providence, United States

This course integrates the various management functions of public assembly facilities. Students focus on advanced management principles, practices and methods.

Public Assembly Facility Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Johnson & Wales University North Miami Campus
Training Center(s)/Venue(s): Miami, United States

This course integrates the various management functions of public assembly facilities. Students focus on advanced management principles, practices and methods.

Public Assembly Facility Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Johnson & Wales University Denver Campus
Training Center(s)/Venue(s): Denver, United States

This course integrates the various management functions of public assembly facilities. Students focus on advanced management principles, practices and methods.

Public Assembly Facility Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Johnson & Wales University Charlotte Campus
Training Center(s)/Venue(s): Charlotte, United States

This course integrates the various management functions of public assembly facilities. Students focus on advanced management principles, practices and methods.

Computer Assembly and Repair (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Polytechnic West
Training Center(s)/Venue(s): Perth, Australia
  V

This qualification is available as a dual qualification with Certificate II in Electronics at Thornlie Campus.

Love currents and switches? Live to make things light up? Charge up your electrotechnology career with skills in the selection, assembly, set-up and maintenance of electrical and electronic apparatus, solving basic engineering problems, in computer support and programming, and in extra-low voltage single path and multi-path DC circuits.
What are the courses for further study and career opportunities?

Certificate III and IV in Electrotechnology qualifications

This qualification provides students with basic handskills and practical skills for the assembly, installation, repair, and re-assembly of computer equipment while working under supervision. The course also includes a blend of theoretical and mathematical skill development and a sound grasp of relevant computer skills. The course particularly suits a student who wishes to progress to further study as a technician by completing a Certificate IV or Diploma in Computer Systems.

Security Assembly and Set-up (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Polytechnic West
Training Center(s)/Venue(s): Perth, Australia
  V

Your future is secure and your work will bring peace of mind to home and business owners. Learn skills like soldering, basic checking and repair of electrical and electronic equipment, installation and termination of wiring systems and safety in the workplace.

This qualification gives you the knowledge to prepare you for the Security Installers Licence examinations conducted by the Commercial Agents Branch of the Police Department.
What are the courses for further study and career opportunities?

Certificate III and IV in Electrotechnology qualifications

Successful completion of this qualification provides you with the opportunity to work as a security installer/servicer or gain an apprenticeship/traineeship. You will need to be employed and registered as an apprentice/trainee before you can commence apprenticeship/traineeship training.

SolidWorks Assembly Modeling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Javelin Technologies Inc.
Training Center(s)/Venue(s): Calgary, Dartmouth, Edmonton, Kitchener, Markham, Oakville, Ottawa, Canada
  V

Lesson 1: Understanding Assemblies
SolidWorks Assemblies
Assembly File Structure
File References
External Reference Search Order
Solving Mates

Lesson 2: Advanced Mate Techniques
Advanced Mates
Case Study: SmartMates and Mate References
Adding Mate References
Design Library Parts
Capture Mate References
Advanced and Mechanical Mate Types
Case Study: Advanced Mates
Summary: Inserting and Mating Components
Multiple Mate Mode
Using Copy with Mates
Case Study: Copy With Mates
Mate Options

Lesson 3: Top-Down Assembly Modeling
Stages in the Process
Case Study: Building In-context Parts
Building Parts in an Assembly
In-Context Features
Propagating Changes
Saving Virtual Parts as External
External References
Breaking External References
Removing External References

Lesson 4: Assembly Features, Smart Fasteners, and Smart Components
Assembly Features and Smart Fasteners
Assembly Feature... [Read More]

Mechanical Assembly (Certificate)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Automated Learning Corporation
Training Center(s)/Venue(s): Kanata, Canada
  V

A comprehensive interactive multimedia learning program with certification for those who assemble mechanical and electronic components.



Objectives

Participants successfully completing the program will be able to:

Recognize the purpose of mechanical assembly as a part of the manufacturing process
List the sequence of tasks in mechanical assembly
Explain the documents used in mechanical assembly and their functions
Describe the tools used in mechanical assembly and the principles for using them safely
Explain principles of torque verification
Recognize the roles of quality procedures and precautions used in mechanical assembly

Assembly and Rigging

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Blue Ridge Community College
Training Center(s)/Venue(s): Weyers Cave, United States

Introduces aerodynamic theory and function of aircraft control surfaces, including the fabrication and installation of control devices for fixed and rotary wing aircraft, jacking and control surface balance. Lecture 1 hour per week.

Pages: 1 2 3 4 5 6


Find Assembly training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
You do not need to register before you can use most of our services. You will get a code for each posting ever made on this website. It is the key for you to remove the posting anytime by yourself.



Electronics
Assembly
- Online/E-learning -
Assembly
Ask for Training
Add Courses