Automobile Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Automobile




Total 555 training courses and degree programs available around the world.

Alternate Technology Vehicles

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is the study of vehicles powered with gasoline engines in combination with other non-gasoline power systems. Hybrid, Fuel Cell, compressed gases and diesel/bio-diesel and Homogeneous Charge Compression Ignition (HCCI) technology will be covered in this course. Additional topics include hybrids, light duty diesels, and 100% electric vehicles.

Automotive Air Conditioning

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of the principles of refrigeration, operation, and testing procedures to determine the cause of malfunction, servicing, or repairing by approved methods. Emphasis is on special tools, equipment, and safety procedures.

Automotive Accessories

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of devices and systems considered accessories by the automotive industry. Study includes windshield wiper systems, power door locks, windows and seats, radios, and clocks.

Advanced Engine Repair

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course includes an advanced application of engine fundamentals, including engine removal, internal diagnostic and repair procedures, engine assembly and installation procedures.

Engine Reconditioning

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a review of engine fundamentals and overhaul procedures followed by performance in all areas of engine block preparation, cylinder head preparation, cleaning, specifications, measurements with micrometers, assembly, and operation of unit.

Certificate II in Automotive Air Conditioning Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia

This course is for an apprentice or qualified automotive technician to gain Certificate II in Automotive Air Conditioning Technology, so they are able to apply for an Automotive Refrigeration Handling License.

Motor Vehicle Entry 3 Level (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Doncaster College
Training Center(s)/Venue(s): Doncaster, United Kingdom
  V


The course consists of 12 units, ranging from Health and Safety, Careers in the Motor Industry to Interim Servicing and Other Vehicle Systems.

Alongside the main motor vehicle qualification you will also have the opportunity to improve your Maths and English skills and gain an Award in Cycle Maintenance. All of these go towards completing your programme of study.

Assessment

​You will be assessed completing a series of tasks, designed to allow you to demonstrate both your practical skills and knowledge. These tasks are intended to show your ability and that you are able to progress to the Entry 3 Diploma or Level 1 Certificate in Motor Vehicle.

Automotive Technology (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Morton College
Training Center(s)/Venue(s): Chicago, United States
  V


The Associate in Applied Science in Automotive Technology degree prepares students for employment as automotive technicians. Classroom study of automotive principles combined with hands on experience, students learn about design, function, diagnosis and proper repair procedures for all major systems related to the automobile.

The Automotive Technology Career Certificate prepares students for employment as automotive technicians. Students learn about design, function, diagnosis and proper repair procedures for all major systems related to the automobile and prepares students for the National Institute for Automotive Service Excellence (ASE) certification exams.

The Automotive Technology Alternative Fuels Career Certificate provides students with the knowledge and skills needed to convert, maintain, diagnose and repair vehicles powered by alternative fuels and prepares students for the Automotive Service Excellence (ASE) exam for Light Vehicle Compressed Natural Gas.

The Automotive Technology Automotive Service Career Certificate prepare... [Read More]

Automotive Technician (ASE) (Certificate)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Texas Southern University
Training Center(s)/Venue(s): Houston, United States
  V

This Automotive Technician (ASE) series covers automotive theory and the service and repair of various systems of the automobile. This course prepares students for a successful career as an Automotive Technician by outlining the automotive industry, the role of the Automotive Technician, and steps for diagnosing and servicing all automobile systems. Learn necessary knowledge to gain employment in the automotive industry with up-to-date content including electronic automatic transmissions, preventive maintenance, and hybrid vehicles. Our automotive technology course is everything a student needs to know to diagnose, service, and maintain automotive systems.

Prerequisite(s): None

Automotive Service Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Community College of Philadelphia
Training Center(s)/Venue(s): Philadelphia, United States
  V

Our Automotive Technology �Automotive Service Technology option program prepares you to become an automotive technician and get people’s vehicles back on the road. You will learn industry-standard computer software training, practical hands-on automotive skills, team building and industry-standard Safety and Pollution Prevention (S/P2) training. Along the way, you will work towards earning an associate’s degree plus certification from Ford Motor Company, receive instruction from experienced, industry-certified instructors, hone techniques in a state-of-the-art facility, have access to the most modern diagnostic and repair equipment, and have opportunities for internships and work experience. This program is accredited by the National Automotive Technicians Education Foundation (NATEF). The College also offers an Automotive Service proficiency certificate.

Degree Options

An Associate in Applied Science, and transfer to a four-year college

Career Options

Automotive service technician and mechanic

Honda PACT

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: GateWay Community College
Training Center(s)/Venue(s): Phoenix, United States
  V

The Honda PACT (Professional Automotive Career Training) program is a partnership between American Honda, local dealerships, training institutions such as GateWay and students. American Honda supplies state-of-the-art training materials, tools and course plans and GateWay provides the instructors and training facility.

Our ASE certified instructors specialize in Honda technology, training at the American Honda training center annually to learn the latest technological training methods.

Our training facility on campus is equipped with:
�Specific tools and equipment required by dealerships
�Training materials from the training center
�NATEF curriculum including stringent guidelines

Student benefits of the PACT program include:
�Having the opportunity to work at local dealerships to gain real-world experience
�Working with specialized tools to supplement their own tool sets
�Earning wages while going to school

Joining the Honda team requires meeting performance standards set by dealerships while at... [Read More]

Toyota T-TEN

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: GateWay Community College
Training Center(s)/Venue(s): Phoenix, United States
  V

The Toyota T-TEN (Technical Education Network) is a two-year automotive program designed to upgrade the technical competency and professional level of incoming dealership technicians.

The curriculum is designed by Toyota and GateWay, leading to an Associate of Applied Science Degree in Automotive Service Technology. The program involves:
�Attending classroom lectures and labs on Toyota products
�Working at a Toyota dealership for approximately 32-44 weeks
�Spending approximately 43 weeks in classroom training
�Rotating eight weeks of class with eight weeks of paid work at a Toyota dealership

Program requirements include students partnering with a sponsored Toyota dealer. The main responsibility of the dealership is to provide training related employment for the student during the cooperative work periods. Students receive assistance in location and identification of participating Toyota dealerships.

Air Conditioning & Electrical Accessories (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: GateWay Community College
Training Center(s)/Venue(s): Phoenix, United States
  V

Students can obtain a Certificate of Completion by successfully completing the following courses with grade of &,quot,C&,quot, or better. This course grouping should prepare the students to enter the automotive air conditioning/electrical service areas of the industry.

Learn to diagnose the source of automotive air conditioning and electrical problems by developing your skill set in this specialty area of automotive technology.

Jobs are found in car dealerships, independent garages, private companies, government agencies, or create your own path as a self-employed automotive technician in this area of expertise.

Automotive Service Technician (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: South Texas Vocational Technical Institute
Training Center(s)/Venue(s): Brownsville, Corpus Christi, McAllen, San Antonio, Weslaco, United States
  V

Our AST diploma program offers flexible scheduling and affordable, practical training for troubleshooting, servicing, and repairing various makes and models of automobiles.

Our classes combine theory with practical application of hands-on skills. Students will learn the use of hand and specialty tools, the importance of shop safety procedures plus customer service skills. Our program is taught by professional instructors in simulated shop environments to help you develop the hands-on experience that employers seek.

At STVT, we are committed to helping you build a strong foundation for your future success as an automobile service technician. The AST graduate will be qualified for entry-level employment and have skills in computerized and conventional systems. Students must possess a high school diploma, GED or recognized equivalent.

Automotive Brakes

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Cosumnes River College
Training Center(s)/Venue(s): Sacramento, United States

Want to learn Automotive Brakes? Cosumnes River College has such training program available, or provided Automotive Brakes training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with Cosumnes River College's representative directly.

Automotive Brakes

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: American River College
Training Center(s)/Venue(s): Sacramento, United States

This course covers theory, design, adjustment and repair or overhaul
of brake systems and components. Operation of power and hand
devices used in the servicing of brake systems and components
is covered. This course meets Automotive Service Excellence (ASE)
A5 standards.

Automotive Technician (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: UEI College - Gardena
Training Center(s)/Venue(s): Gardena, United States
  V

Earn your diploma as an Automotive Technician in as few as 32 weeks! This career-focused program is designed to give you complete training, fully preparing you to begin working in the automotive industry. You’ll learn the latest technology and techniques in auto diagnostics, maintenance and repair from experienced instructors who want to help you successfully complete the program. Gain hands-on experience in:

•Engine Performance and Ignition Systems
•Fuel Systems and Emission Controls
•Brake Systems
•Manual Transmissions
•Preventive Maintenance and Hybrid Technology
•Electrical Theory and Diagnosis
•Steering Suspension and Passenger Comforts
•Engine Theory and Systems
•Automatic Transmissions


Auto Tech Career Outcomes for Automotive Technicians

According to the Bureau of Labor Statistics*, job opportunities are expected to be very good for those who complete postsecondary automotive training programs and earn a diploma. Most automotive workers are employed by automotive repair and maintenance s... [Read More]

Auto Service Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: J. Everett Light Career Center
Training Center(s)/Venue(s): Indianapolis, United States
  V

The Automotive Service Technology Program is certified by the National Automotive Technical Education Foundation (NATEF). Instructors are Certified Master Technicians (ASE). Classroom and Lab activities include instruction in the basics of modern automotive construction and operation, service, and maintenance. Unit information and practical hands-on experience start at beginner skill levels and progress to entry-level employment..

The first units include the necessary basics of shop safety, tool usage, parts identification and the principles of component operation. Subsequent units progress to more involved assignments and ‘hands-on�experience in: starters and alternators, wheel alignment, brakes, engines, automatic and manual transmissions, engine diagnostics, and heating and air conditioning.

Automotive Service Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Vancouver Island University
Training Center(s)/Venue(s): Nanaimo, Canada
  V

The Automotive Service Technician Foundation Program is a full–time comprehensive program taught through daily lectures, seminars and demonstrations of current servicing techniques, as well as extensive practical training in a functioning automotive shop setting. The course curriculum reflects today&,#146,s technology and is relevant to the needs of industry. The instructors are all highly trained Journeyperson Automotive Technicians with at least ten years&,#146, trade experience.

This program is suited to individuals with all levels of mechanical experience. Upon successful completion of all the program courses, students receive an Automotive Service Technician Foundation Program certificate and an Essential Skills for the Workplace �Automotive Service Technician certificate. Graduates of this program may receive credit towards the technical portion of the first year of the Automotive Service Technician Apprenticeship program.

Automotive Service Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Kwantlen Polytechnic University
Training Center(s)/Venue(s): Langley, Richmond, Surrey, Canada
  V

This 30 week program prepares students for employment as an apprentice Automotive Service Technician. Students will develop practical skills by repairing customer vehicles in a fully operational auto repair shop on the Cloverdale campus. This training will enhance students&,#146, knowledge and skills in shop safety, inspection, diagnostics, repair and servicing of mechanical, electrical and electronic systems for automobiles and light trucks.

At the end of the Foundation program students will write the Auto Service Technician Level 1 Certificate of Qualification (COQ) exam. Students who complete the Foundation program and COQ exam are eligible for credit in Automotive Service Technician Level 1 apprenticeship program and 450 work-based training hours.

Career Opportunities

This program prepares graduates for employment in motor vehicle dealers, garages, truck and trailer dealerships, fleet maintenance companies, service stations, automotive specialty shops, transportation companies and retail establishments which have automotive servic... [Read More]

Pages: 1 2 3 4 5 6 ...


Find Automobile training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
Want to find a place to stay close to the school? Or homestay in a different country? Try the house rental message board where you can search for roommates and post shared rooms or apartments for rent.



Automotive
Automobile
- Online/E-learning -
Automobile
Ask for Training
Add Courses