Cable Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Cable




Total 127 training courses and degree programs available around the world.

Haul Underground Cable

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia

This course is designed for all people carrying out cable hauling within the carriers network. The course consists of:
Dangerous gases
Cable types and handling methods
Drawing techniques and equipment
Preparing and proving cable pathways
Attaching hauling device
Guiding and hauling the cable

Cable Jointing (Basic) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia
  V

This course is designed for people with nil or minimal experience in the Telecommunications network who wish to gain the skills to work as a cable jointer on non-working cables within the carrier network and customers premises.The course (within industry known as Cable Jointing-Basic) consists of:
Introduction to basic electrical principles
Distribution cables
Rotational and connected pairs
Plan reading
Preparing cables for jointing and Cable jointing
Joint enclosures/Connector jointing
Working cable precautions
Test handset (Buttinski) and basic test instruments
Cable pair ID sets, F set and loop-a-line, GP set
Lines Test Set No 2
Fault conditions
Cross Connecting Units
?1D pole enclosure
Heat shrink openable joint
Re-entry into gel-sealed cables
Quality assurance
Dangerous gases and gas detection Sharps/Asbestos awareness

Cable Jointing (Advanced)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia
  V

This course is designed for all people carrying out telephony cable jointing on working cables within the carriers network. The course (known within industry as Cable Jointing ?Advanced) consists of:
Customer contact
Working in Carriers network/customer premises
Test instruments
Automatic line testers
Cross connecting units
Cable pressure alarm system
Working in distribution areas
Working cable precautions
Cable cut over techniques
Systems reporting
Pair gain systems
Lightning protection
Above ground jointing point

Power Cable Engineering

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

Recent changes in technology have made it essential for engineers to update their methods for selecting and installing cable systems. The correct cable system is necessary for efficient implementation and operation of projects. This course deals with theory and engineering practices that are relevant to power cables, providing basic understanding of cable construction and applicable standards.

Worked examples will be used to discuss the cable system design process, which involves cable selection, ampacity determination, and sizing criteria. The course will also present and demonstrate above grade and buried cables installation requirements, covering utility distribution (4 kV - 35 kV) and industrial and power plant (4 kV - 15 kV) cable classes.

Objective
To present the theory and practice of power cable and accessory engineering, with particular emphasis on: manufacturing, selection, sizing, installation, insulation and grounding.

Who Should Attend
Industrial, utility, or plant electrical engineers and technicians responsible f... [Read More]

Broadcast and Cable Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Temple University
Training Center(s)/Venue(s): Philadelphia, United States

Marketing strategies for networks, stations, and cable systems. Topics included relationships with government, networks, employee groups, and ownership, personnel policies and supervision, budgets and reports.

Broadcast and Cable Management

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Temple University Center City
Training Center(s)/Venue(s): Philadelphia, United States

Marketing strategies for networks, stations, and cable systems. Topics included relationships with government, networks, employee groups, and ownership, personnel policies and supervision, budgets and reports.

cctv technician Workshop

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: thinkcctv.net
Training Center(s)/Venue(s): Cebu, philippines

for installation,repair and cabling set up.

Broadband Cable (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: North Seattle Community College
Training Center(s)/Venue(s): Seattle, United States
  V

The NSCC Broadband Cable certificate provides entry-level training to work as a technician in the broadband cable industry. North’s is the only program in the region that specifically addresses broadband cable systems.

Curriculum Highlights

The Broadband program at NSCC was the result of a 9-month project with Comcast, where NSCC faculty worked with Comcast trainers and supervisors to assist in developing effective training programs. At the conclusion of the project, NSCC developed a short certificate, which prepares students for entry-level broadband cable technician positions.

Broadband coursework includes Introduction to Broadband, A+ certification courses, Principles of Electronics and Customer Relations. Course content reflects current industry standards and is constantly revised and updated.

Since cable companies are so IT integrated, the A+ certification curriculum is included in the broadband certificate. Most electronics specialties take the broadband courses as well as the A+ certification, since so many electronic sys... [Read More]

Copper and Fibre Cable Splicing (Certificate)

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: NAIT Corporate and International Training
Training Center(s)/Venue(s): Calgary, Edmonton, St. Albert, Vancouver, Canada

Want to learn Copper and Fibre Cable Splicing? NAIT Corporate and International Training has such training program available, or provided Copper and Fibre Cable Splicing training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with NAIT Corporate and International Training's representative directly.

Cable Location & Pipe Avoidance

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Folkestone, Verney Junction, United Kingdom

This course provides the knowledge for working safely and efficiently in the workplace or on-sit, and how to avoid underground services before excavation and thereby preventing service strikes.

Coaxial, Optical Fibre and Structured Cable

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: SkillsTech Australia
Training Center(s)/Venue(s): Brisbane, Australia

Want to learn Coaxial, Optical Fibre and Structured Cable? SkillsTech Australia has such training program available, or provided Coaxial, Optical Fibre and Structured Cable training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with SkillsTech Australia's representative directly.

Introduction to Cisco Cable Routers (ICCR) (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Advanced Network Information, Inc.
Training Center(s)/Venue(s): Sunnyvale, United States
  V

The ICCR course reviews and enforces basic Radio Frequency knowledge as needed to implement data services over a hybrid fiber coax (HFC) network. This course will familiarize you with the Data Over Cable Service Interface Specification (DOCSIS) 1.1 and 2.0 including terminology, concepts and core protocol functionality. You will also become familiar with Cisco&,#146,s uBR7246VXR, uBR7100 Series and uBR10012 CMTS products including overviews, hardware and software component functions, system installation and configuration, troubleshooting, monitoring debug and crash analysis using hands-on lab exercises to reinforce your knowledge.

Course Objectives

After completing this course the student should be able to:
?Discuss CATV topology, cable terminology, and technology.
?Describe DOCSIS cable plant, and hardware specifications.
?Identify the Cisco CMTS and CM products, their features and options.
?Install, configure, test, and operate a basic high-speed data access facility using Cisco CMTS and CM.
?Troubleshoot and moni... [Read More]

Cisco Data Over Cable Service Interface SpecificationVersion 3.0 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Advanced Network Information, Inc.
Training Center(s)/Venue(s): Sunnyvale, United States
  V

The Cisco Data Over Cable Service Interface Specification (DOCSIS) 3.0 course covers primary cable modem termination system (CMTS) cable routing system standards and concepts, provides hands-on expertise, and establishes important foundation knowledge for bidirectional channel bonding and other advanced service cable technologies. Architectures emphasized through lecture and lab exercises include both modular CMTS (M-CMTS) and integrated CMTS (I-CMTS). While this course focuses on implementing DOCSIS services on the Cisco® uBR10012, the learning experiences from this course also apply to other CMTS&,#146,s that support DOCSIS 3.0 technology.

Prerequisites

Following are the strongly recommended prerequisites for this cable training course:
•Students should have knowledge of the Cisco CMTS cable routing equipment and should be able to establish, without assistance, a configuration for the Cisco uBR10012.
•Students should have equivalent knowledge and experience of the Cisco Introduction to Cisco Cable Routing (ICCR) course and the Advance... [Read More]

Cisco Network Registrar/Broadband Access Center (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Advanced Network Information, Inc.
Training Center(s)/Venue(s): Sunnyvale, United States
  V

Upon completing this course, the learner will be able to meet these overall objectives:
•Install CNR and BAC in a Sun hardware environment
•Describe the DNS protocol and how it is used to perform hostname resolution
•Describe the different types of DNS server configurations for extending the reach of a LAN and the methods that can be used with a focus on RF wireless access
•Use both the command-line interface and web user interface to configure DHCP and DNS objects
•Configure CNR DNS and DHCP for an IPv6 environment
•Configure DHCP objects for multiple scopes, policies, and networks
•Perform system administration duties for CNR and BAC software running in each of the supported operating systems
•Configure CNR and BAC to support classes of service for network devices
•Describe the feature set and functionality of Cisco Broadband Access Center
•Describe the boot-up sequence of DOCSIS Cable Modems and other network devices behind the CM
•Describe the different types of servers which make up the Head-End and Regional Data ... [Read More]

Cisco Network Registrar Version 7.0 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Advanced Network Information, Inc.
Training Center(s)/Venue(s): Sunnyvale, United States
  V

The Cisco CNR course is an instructor-led three-day course focusing on learning skills required to configure DNS and DHCP services for DOCSIS and PacketCable Customer Premise Equipment, using Cisco Network Registrar (CNR). IP Address Management of traditional computer clients such as Personal Computers, workstations, printers and mobile devices will also be covered. This course will serve to educate students on the protocols and configuration. Students will receive extensive hands-on experience in addition to lecture. Each student will configure their own DHCP, and DNS. Students will run simulation tools to simulate booting DOCSIS cable modems and PCs on a network. Testing will include high availability architectures for DHCP and DNS provisioning for Enterprise and Campus cable environments.

This stand-alone CNR course is appropriate for candidates working in an Enterprise or Campus (not Cable Service Provider) cable routing environment. Candidates who support Cable MSO’s should attend the Combo - Cisco Network Registrar 7.0/Broadband Access Center 4.0 (CNRBAC) ... [Read More]

Cable

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IIATCA & IIATEA
Training Center(s)/Venue(s): Kolkata, India
  V

Types of cables
Power
Control

Insulation for power cable

Low and high voltage XLPE cables

Advantage of XLPE over PVC insulation

Relevant cable specification

Calculation of service parameters and preparation of Guaranteed technical parameters for field application

Voltage drop in cable installation

Electrical and Thermal analogues in cables

Short circuit and earth fault current calculations

Design of cable to compute various dimensions in the cable

Inspection procedure ?Routine, type, acceptance and optional tests

Storage of cables

Site testing of cables after installation

Diagnostic evaluation of cables in service in LT and HT networks

Fault locations of cables

Broadcast & Cable Sales

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Southern Indiana
Training Center(s)/Venue(s): Evansville, United States

Techniques for selling time on radio, television and cable. Includes interpretation of ratings reports, working with advertising agencies, preparation of sales presentations, and marketing.

Introduction to Broadcasting, Cable and Internet

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Southern Indiana
Training Center(s)/Venue(s): Evansville, United States

A history and survey of broadcasting. This course traces the development of broadcasting to the present day, with emphasis on contemporary broadcasting with its social, cultural, and economic implications.

Advanced Cisco Cable Routers

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fast Lane Consulting and Education Services, Inc.
Training Center(s)/Venue(s): Austin, Boston, Chicago, Dallas, Houston, Los Angeles, Miami, Philadelphia, San Diego, San Francisco, United States
  V

After completing this course the student should be able to:

Describe the current DOCSIS implementation in detail and, at a conceptual level, describe how DOCSIS technology is adapting to meet Service Provider and customer needs.
Describe the benefits and limitations associated with the advanced PHY components of a DOCSIS 2.0 deployment.
Discuss the design considerations surrounding the deployment of a robust, resilient, highly available cable infrastructure in support of residential and commercial services.
Discuss the use of IOS tools to actively control traffic flows and to support traffic policies within the cable environment.
Describe the considerations for an effective security policy within a cable network environment.
Describe key, adjustable, parameters that can affect overall cable network functionality and performance.
Describe the considerations to weigh prior to deploying new technology options in a cable network environment.
Course Content
This Advanced Cable Router Course follows the current Introduction to Cisco Cable Router ILT... [Read More]

Cisco Cable Routers

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Fast Lane Consulting and Education Services, Inc.
Training Center(s)/Venue(s): Austin, Boston, Chicago, Dallas, Houston, Los Angeles, Miami, Philadelphia, San Diego, San Francisco, United States
  V

The ICCR course reviews and enforces basic Radio Frequency knowledge as needed to implement data services over a hybrid fiber coax (HFC) network. This course will familiarize you with the Data Over Cable Service Interface Specification (DOCSIS) 1.1 and 2.0 including terminology, concepts and core protocol functionality. You will also become familiar with Cisco’s uBR7246VXR, uBR7100 Series and uBR10012 CMTS products including overviews, hardware and software component functions, system configuration and troubleshooting using hands-on lab exercises to reinforce your knowledge. This course also introduces the topics and issues of Voice over a Packet Cable network, Digital Networking Overview and the basics of Cable Security.This update includes the addition of new CMTS line cards, the MC520U and the MC28U, with the associated content and lab exercises.

Course Outline
Course Introduction
Radio Frequency Overview
Introduction to DOCSIS
uBR 7100/7200 CMTS
uBR 10012 Carrier Class CMTS
Cable Security
PacketCable Overview
Digital Video Networking ... [Read More]

Pages: 1 2 3 4 5 6 ...


Find Cable training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.



Engineer
Cable
- Online/E-learning -
Cable
Ask for Training
Add Courses