Compressor Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Compressor




Total 60 training courses and degree programs available around the world.

Pumps and Compressors

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

Pumps and compressors are essential components in almost all industries in that they are required to meet system demands and operate reliably. Further, since they can consume approximately 30% of a plant’s total energy use, efficient operation is essential. Pumps and compressors therefore need to be cost efficient and reliable.

By attending this course you will gain an understanding of the characteristics of various types of pumps and compressors and their components. The course will provide Engineers and Technicians with information for the optimal selection, operation and maintenance of centrifugal and positive displacement pumps as well as positive displacement and dynamic compressors.

Course Outline
Pump Regulations, Codes &, Standards
Positive Displacement &, Centrifugal Pumps
Pump &, Compressor Selection
Types of Compressors
Compressor Regulations, Codes &, Standards
Compressor Regulation
Associated Compressor Equipment
Compressor Facilities
Pump &, Compressor Components &, Drive... [Read More]

Pumps, Compressors, Pipe Systems and Cranes

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

The practical aspects of Engineering are not always fully explored in Universities and Colleges. Further, not only new, but more senior employees may not be familiar with certain pieces of mechanical equipment. This course explains how, in a practical way, the following key components of plant equipment assets function, are operated and are maintained �Pumps, Compressors, Industrial Piping, Cranes and Optimal Maintenance Practices.

The course is designed for both technical and non-technical personnel who wish to increase their understanding of common plant equipment.

Objectives
To provide a basic understanding of the design, key features and operation of Mechanical equipment typically found in industry.
To emphasize a practical approach to the procurement, installation, operation and maintenance of Mechanical equipment.
To provide an understanding of the fundamentals of efficient pipe systems including pipe flow and pipe fixtures.
To describe the various types of cranes and lifting devices and provide a fundamental understanding... [Read More]

Compressors �Type, Application, Selection and Design Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Rebis Academy
Training Center(s)/Venue(s): Toronto, Canada

Compressors �Type, Application, Selection and Design

Pumps and Compressors �Type, Application, Specification and Design Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Rebis Academy
Training Center(s)/Venue(s): Toronto, Canada

Pumps and Compressors �Type, Application, Specification and Design

Compressor

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Carbon Sound and Picture
Training Center(s)/Venue(s): Toronto, Canada
  V

This one-day course is the consummate companion for those that are moving media between applications, uploading to the web, creating finished DVD or backing up video files and are baffled how to do it.

Who Should Attend?
Video editors, DVD authors, Up and coming compressionists, Motion Graphics artists and those with just a keen interest.

Prerequisites:
Students should have the following prerequisite knowledge prior to attending the course: •Although anyone is welcome to attend this course, it is a good idea to have some background knowledge on video production, DVD authoring or motion graphics.

•A strong understanding of the Mac OS is required as this course presumes you have an understanding of how to navigate within Mac OS X.

Practical Compressor Technology: Selection, Applications, Operation, ... Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Best Western Village Park Inn
Training Center(s)/Venue(s): Calgary, Canada
  V

Maximum efficiency, reliability, and longevity of compressors, and bearings are of great concern to many industries. These objectives can only be achieved by understanding the characteristics, selection criteria, sizing calculations, sealing arrangements, common problems, repair techniques, as well as their preventive and predictive maintenance. This course is a MUST for those who use this equipment. It covers how compressors and bearings operate and provides the guidelines and rules that must be followed for their successful application. Their basic design, specification and selection criteria, sizing calculations as well as all maintenance issues including vibration analysis, and used oil analysis are discussed in detail.

Audience:
Process, Design, Consulting, Plant, and Piping engineers, project managers, maintenance managers, water treatment plant managers, facility managers and technicians and technologists. The course will be of great interest to chemical process industries, oil and gas industries, manufacturing plants, power generation plants, defen... [Read More]

Pumps, Valves, Piping and Compressors

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Sault College
Training Center(s)/Venue(s): Sault Ste. Marie, Canada

In this course, the student will learn about the different applications, installation, maintenance and types of pumps, valves, piping, compressors and ancillary equipment.

Compressors, Fans and Pumps: Basics, Selection & Operation (1.2 CEUs)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description
Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and repair techniques, preventive/predictive maintenance.

Target Audience

Design and project engineers and technologists, plant and facility engineers, consultants, mechanical engineers and technologists, maintenance and operation personnel and other technical personnel who need to upgrade/refresh their current knowledge of Compressors, Pumps and associated systems.

Program Outline (1.2 CEUs / 12 PDHs)

DAY 1

Introduction to Fluid Machines &, Systems

Fluid Properties

Basic properties of gases and liquids: gas laws &, compressibility effects
Definitions &, units of measurement: mass/volume ... [Read More]

Mechanical Aspects of Centrifugal Gas Compressors (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: ESD Simulation Training
Training Center(s)/Venue(s): Perth, Australia
  V

It is an add-on to our Control &, Operation of Centrifugal Compressors training course but is also run as a stand-alone package.

Suitable For: People involved in the specification, maintenance, and inspection of compressors. The course would also be useful for personnel who are responsible for the operation of centrifugal compressors.

Key Topics Covered:

Principles of Operation
Designs
Construction
Configurations
Rotor Assembly
Casing/Shaft Seals
Lubrication
Condition Monitoring
Gas Cooling
Liquid Knockout
Piping Systems
Instrumentation
Compressor Installation
Compressor Operations

Control, Operation and Design of Reciprocating Gas Compressors (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: ESD Simulation Training
Training Center(s)/Venue(s): Perth, Australia
  V

The course describes the principles of operation of the compressor and how the design is adapted to a number of different configurations to meet numerous needs. A fundamental understanding of gas behaviour will be an asset but not mandatory for this course.

Suitable For: Engineers and operations personnel who are either supervisors or are responsible for the day to day operation and maintenance of reciprocating installations, process operators, technicians and engineers.

Key Topics covered:

Compressor Selection
Compression Process
Theory of Operation
Compressor Operation
Compressor Cylinder Assembly
Frame Assemblies and Compressor Configurations
Cooling and Lubrication
Capacity Control
Performance &, Design Calculations
Case Studies and Compressor Applications

Control and Operation of Centrifugal Gas Compressors Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: ESD Simulation Training
Training Center(s)/Venue(s): Perth, Brisbane, Melbourne,, Australia
  V

The practical exercises and workshops will use dynamic simulation models of compression systems running on PCs. They will be easy to use and the participants will require no prior knowledge of dynamic simulation.

Key topics covered in the course include compressor performance and selection, instrumentation and control, surge protection and compressor operation. Case studies will be used and participants will be encouraged to solve problems for themselves.

Suitable For: Engineers with little previous knowledge of compressors and who are involved in the design, control, operation or commissioning of process plants.

Key Topics Covered:

Compression Principles
Process &, Control Description
Compressor Operations
Mechanical Design - Centrifugal Compressors
Instrumentation &, Control
Simple Anti-Surge Control
Recycle Valve Sizing
Compressor Protection &, Complex Anti-Surge Control
Compressor Operations
Case Studies
Course Review

Millwright Reciprocating Compressor Maintenance

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Alberta Institute of Technology
Training Center(s)/Venue(s): Edmonton, Canada
  V

Explore reciprocating compressor theory, operation and maintenance! Students will learn theory and do hands-on compressor maintenance on working equipment.

Course content includes:

�24 hours of reciprocating compressor design and maintenance theory
�20 hours in the shop applying maintenance, inspection and overhaul techniques for single-acting and double-acting reciprocating compressors.

Practical Compressor Technology: Selection, Applications, Operation, Troubleshooting, and Maintenance (1.8 CEUs)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description
Maximum efficiency, reliability, and longevity of compressors, and bearings are of great concern to many industries. These objectives can only be achieved by understanding the characteristics, selection criteria, sizing calculations, sealing arrangements, common problems, repair techniques, as well as their preventive and predictive maintenance. This course is a MUST for those who use this equipment. It covers how compressors and bearings operate and provides the guidelines and rules that must be followed for their successful application. Their basic design, specification and selection criteria, sizing calculations as well as all maintenance issues including vibration analysis, and used oil analysis are discussed in detail.
Objectives
To provide a comprehensive understanding of the various types of compressors, and bearings so participants can specify, select, size, commission and maintain compressors and bearings for their applications.
To achieve reduced capital, operating and maintenance costs along with increase in efficiency.
Read More]

COMPRESSORS

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Indian Institute For Production Management
Training Center(s)/Venue(s): Rourkela, India
  V

At the end of the programme, the participants will be able to -


Theoretical and practical aspects of selection, operation and maintenance of Compressor


--------------------------------------------------------------------------------




coverage



Types of Compressors

Classification and Selection

Maintenance aspects and Trouble shooting

Installation,Operation and Performance aspects

Condition Monitoring of Compresors

Compressors, Fans and Pumps Basics, Selection and Operation (1.2 CEUs)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description

Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and repair techniques, preventive/predictive maintenance.

Target Audience

Design and project engineers and technologists, plant and facility engineers, consultants, mechanical engineers and technologists, maintenance and operation personnel and other technical personnel who need to upgrade/refresh their current knowledge of Compressors, Pumps and associated systems.

Program Outline (1.2 CEUs / 12 PDHs)

DAY 1

Introduction to Fluid Machines & Systems

Fluid Properties

Basic properties of gases and liquids: gas laws & compressibility effects
Definitions & units of measurement: mass/volume flow rates, absolute & gauge pressures/h... [Read More]

Compressors, Fans and Pumps: Basics, Selection & Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description
Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and repair techniques, preventive/predictive maintenance.

Target Audience

Design and project engineers and technologists, plant and facility engineers, consultants, mechanical engineers and technologists, maintenance and operation personnel and other technical personnel who need to upgrade/refresh their current knowledge of Compressors, Pumps and associated systems.

Program Outline (1.2 CEUs / 12 PDHs)

DAY 1

Introduction to Fluid Machines & Systems

Fluid Properties

Basic properties of gases and liquids: gas laws & compressibility effects
Definitions & units of measurement: mass/volume flow rates, absolute & gauge pressures/heads... [Read More]

Compressors, Fans and Pumps: Basics, Selection and Operation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description
Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and repair techniques, preventive/predictive maintenance.

Target Audience

Design and project engineers and technologists, plant and facility engineers, consultants, mechanical engineers and technologists, maintenance and operation personnel and other technical personnel who need to upgrade/refresh their current knowledge of Compressors, Pumps and associated systems.

Program Outline (1.2 CEUs / 12 PDHs)

DAY 1

Introduction to Fluid Machines & Systems

Fluid Properties

Basic properties of gases and liquids: gas laws & compressibility effects
Definitions & units of measurement: mass/volume flow rates, absolute & gauge pressures/heads... [Read More]

Gas Turbine - Power Plant & Aviation Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Turbo Institute of Industrial Technology
Training Center(s)/Venue(s): Hyderabad, India
  V

Turbo IIT visualises the necessity for a unique training course on Gas Turbines driving high capacity generators. Several gas turbines are installed in Andhra Pradesh like Spectrum Power Generations, GMR Vemagiri, GVK Jegurupadu, Gautami CCGT, Konaseema CCGT, Lanco Kondapalli, Samalkot Gas CCGT, Vijjeswaran Gas CCGT. Ministry of Power is planning for installation of many power plants in the country generating more opportunities in construction and O&M areas. Supercritical power plant installation of 42000MW capacity is planned in Nellore alone. This training creates good opportunity for employment in power plants in the country as well as in Middle East.

Module 1 Familiarization of Gas Turbine
Module 2 Constructional Features
Module 3 Gas Turbine Auxiliaries
Module 4 Maintenance Strategy
Module 5 Operating Philosophy

GSRMS - Air Compressor Basics

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: LSU Continuing Education
Training Center(s)/Venue(s): Baton Rouge, United States

Course covers the basics of air compressors and compressed air systems.

- Reciprocating or Rotary Compressor: Each has its benefits
- Air Compressor Controls: Mechanical v/s PLC
- Air Dryers: Pro’s and Con’s
- Air Receivers: Is Bigger Better?

GSRMS - Basic Reciprocating Engine and Compressor

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: LSU Continuing Education
Training Center(s)/Venue(s): Baton Rouge, United States
  V

This classroom and hands–on compressor maintenance course is provided by Valerus Compression

Students should bring the following Personal Protective Equipment to the training session: FRC, hard hats, steel toed boots/shoes, and eye protection (safety glasses). Gloves and hearing protection will be provided.

All measuring instruments hand tools and special tools required for the hands-on training session will be provided.

Pages: 1 2 3


Find Compressor training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
If you want to post any message on this website, please do not include your real name, phone number, email address in the message body area. You should enter them in line text boxs respectively, if needed.



Engineer
Compressor
- Online/E-learning -
Compressor
Ask for Training
Add Courses