Electrical Engineering Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Electrical Engineering




Total 800 training courses and degree programs available around the world.

Electrical Fundamentals

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States

The Electrical Fundamentals training at provides a deeper understanding of electrical fundamentals including topics on Ohm&,#146,s Law, AC circuits, transformers and three phase systems. Students who finish the course will receive a certificate (NERC-approved).

Introduction to Electrical Engineering

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course introduces the basic concepts of circuit analysis, applying fundamental laws and principles, resistor circuits, and first- and second-order linear circuits in the time domain using calculus-based solutions where applicable.

Grounding & Bonding

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States

Meets Master Electrical License Renewal Requirements For MD (Approved for 10 Hours in PG, Queen Anne’s, Harford, Caroline &, Wicomico Counties &, 5 Hours in Cecil County), DE (8 Hours), NC (10 Hours) &, also approved for 3 Hours in VA. A 10-Hour Seminar dedicated to providing an understanding of Article 250 (Grounding and Bonding) of the 2014 National Electrical Code.

Building Electrical Troubleshooting Skills

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States
  V

Hands on Training This hands-on training mini-course provides an overview of electrical circuits and troubleshooting focusing on practical, hands-on techniques for understanding electrical systems and EMD fundamental operating principles, programming, and troubleshooting on common commercial and industrial circuits. Participants will learn by building and testing circuits that include several different types of mechanical and solid-state components, including motors and other common control devices. Topics: How to test and correct power problems like transients, harmonics, and voltage sags and swells, The difference between apparent power, true power, power factor, and how to measure and compare each type, Interfacing a drive to a PLC controlled system, Troubleshooting common electrical problems, Best test instruments to use when testing and troubleshooting different circuit and system problems. Meter types used during seminar include at least 8 different types of circuit testers, DMMs, current clamps, and power quality analyzers.

Electrical/Electronics Engineering Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States
  V


Electronics, automation, and computers are the lifeblood of today&,#146,s high tech societies. The Bachelor of Science in Electrical/Electronics Engineering Technology (BS EET) program graduates professionals that develop, design, apply, manage and direct the future of these technologies.

Graduates are prepared for careers in Industrial Automation and Controls, Digital and Embedded Systems Design, Instrumentation, Programming, or Control Networks. Our graduates often obtain positions with titles such as Control System Integrator, Product Designer, Embedded Systems Developer, Control and Network Specialist, Technical Sales Specialist, Electrical/Electronics Product Specialist, etc.

The BS in Electrical/Electronics Engineering Technology is accredited by the Engineering Technology Accreditation Commission of ABET (ETAC-ABET), 111 Market Place, Suite 1050, Baltimore, MD 21202-4012, Phone 410-374-7700.

Career Opportunities

The BS EET program is known for quality and responsiveness to industry. In addition to a solid found... [Read More]

Electrical Engineering for Practitioners in the Oil and Gas Industry

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

This course is focused on basic electrical engineering concepts and is designed to promote integration of engineering disciplines in the oil &, gas industry and to introduce electrical engineering concepts to oil and gas practitioners.

You will study basic electrical engineering design concepts such as fault calculations and protective equipment coordination and become familiar with the electrical single line diagram, area classification concepts, grounding and bonding issues. You will learn how to identify possible areas of vulnerability in your electrical system, how to mitigate the risks to your electrical systems and how to improve the bottom line of your business.

Course Outline
Area classifications, standards &, practices
Short circuit studies for equipment &, relaying
Grounding
Load analysis
Plant utility interface
Protective devices &, relay settings
Motor protection
Surge voltage protection
Application areas in Petro Chem industry
Energy management &, efficiencies

Electrical Engineering for Non-Electrical Engineers

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

This course focuses on basic electrical design concepts that will meet the demands of industrial and commercial design, construction, and maintenance. In addition to familiarizing participants with basic electrical circuits and circuit parameters, the course provides a general understanding of the methods used to design low voltage power distribution systems (600 volts or less).

The course will emphasize Canadian Electrical Code while introducing the basics of electrical generation, transmission and distribution, design philosophy and procedures, construction materials, services, grounding, and power quality.

Course Outline
Electric power &, circuit fundamentals
Power quality
Major electrical equipment
Electrical power generation
Load characteristics &, conductor sizing
Fault calculation &, protection system
Standards &, codes
Design procedures
Motor branch circuit design
Feeder circuit design

Who Should Attend
Non-Electrical Engineers �Project Engineers �Operations &am... [Read More]

Electric Circuits

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

In this webinar, the binary numbering systems will be looked at along with Binary Arithmetic. From there logic gates &, switches will form the basis of further study in Combinational Logic Functions. Electromechanical relays are first used to demonstrate logical functions as they will then lead to more complex circuitry of sequential circuits, shift registers and solid state components. Analog to Digital Conversion (ADC) will be looked at along with Digital Storage (Memory).

Course Outline:
Numbering systems
Binary arithmetic
Logic gates (And, Or, Not, Nand Nor, Exclusives)
Electromechanical relays as gates
Combinational logic functions
Sequential circuits and shift registers
The analog to digital converter
Digital storage

Performing Engineering Operations (Electrical) Level 1 Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Doncaster College
Training Center(s)/Venue(s): Doncaster, United Kingdom
  V

The course requires approximately 16 hours contact time per week which will be timetabled Tuesday 9am to 3.30pm and Wednesday 9am to 5pm.

This award is aimed at people new to the Engineering Industry who require qualifications in Electrical.

The qualification recognises what a competent person is able to do at work. The course involves learning and developing the skills and knowledge needed to work in an engineering workshop environment. This course has a high practical content.

Course structure

The course requires the completion of three mandatory and two optional assessment routes.

Mandatory Units: 001, 002, 003.
•Working safely in an engineering environment
•Working efficiently and effectively in engineering
•Using and communicating technical information.

Optional Units: 020, 023.
•Assembling and wiring electrical panels
•Assembling electronic circuits.


Assessment

​The course is internally assessed through observation/practical/written assessment t... [Read More]

Mechanical and Electrical Engineering Level 2 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Doncaster College
Training Center(s)/Venue(s): Doncaster, United Kingdom
  V

This award is aimed at people new to the Engineering Industry who require qualifications in Electrical/Mechanical specialisms.

The first year general course covers topics both in Electrical and Mechanical, successful students will be able to progress onto a National Certificate course and specialise in either Electrical or Mechanical Engineering.

The course requires the completion of two core units, two mandatory units and six specialist units.

Core Units:-

•The Engineered World
•Investigating an Engineered Product
•Mandatory Units:-
•Interpreting and Using Engineering Information
•Mathematics for Engineering

Specialist Units:-

•Health and Safety in Engineering
•Engineering Materials
•Electronic Circuit Design and Construction
•Electrical and Mechanical Science for Engineering
•Computer Aided Engineering
•Machining Techniques

Electrical and Computer Engineering (Master Degree)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Colorado State University OnlinePlus
Training Center(s)/Venue(s): Fort Collins, United States
  V

Make a bigger impact within your company and enjoy the salary benefits that come with it when you earn your Master of Engineering with a specialization in electrical and computer engineering (ECE) from a leader in engineering research and education.

Whether you&,#146,re looking to increase your salary, earn the opportunity to work on higher-level projects, or simply need to keep up with the pace of innovation, our master&,#146,s degree in electrical engineering can help you get there. Electrical and computer engineers are in demand across virtually every industry, allowing you to pair your passion with this advanced education.

The customizable curriculum of our online computer engineering degree meets current workforce and skill set needs in the industry.

When you earn your electrical engineering degree online, you&,#146,ll learn from renowned faculty on the cutting-edge of engineering research and walk away from this program with knowledge that goes far beyond a textbook with skills to provide real world solutions for tomorrow&,... [Read More]

Electrical Engineering for Non Electrical Engineers Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Best Western Village Park Inn
Training Center(s)/Venue(s): Calgary, Canada
  V

This seminar will cover all disciplines of electrical engineering including alternating current systems, direct current systems, magnetism, power equipment, switchgear, and protective equipment without relying on complex mathematics. This seminar is a MUST for any individual seeking an in-depth knowledge of all the principles, and practices of electrical engineering as well as electrical equipment or an electrical engineer who would like to refresh and enhance their understanding of electrical equipment. This seminar will be taught in an easy to understand manner by demonstrating practical examples of applied electrical engineering through illustrated case studies. This seminar will also provide a comprehensive understanding of the operation and maintenance of all essential electrical equipment including the various types of transformers, inverters, rectifiers, motors, variable frequency drives, uninterruptible power systems, generators, excitation systems, circuit breakers, and fuses.

The seminar will cover how electrical equipment operates, the latest maintenan... [Read More]

Electrical Engineering (Master Degree)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: University of California, Los Angeles
Training Center(s)/Venue(s): Los Angeles, United States
  V

The online M.S. Program consists of 9 courses: 8 at the EE100/EE200 level, with at least 5 at the EE200 level, and one directed study course (numbered 597A). The latter course serves to satisfy the University of California requirement for a capstone event (in the on-campus program the requirement is covered by a comprehensive examination or a thesis), this directed study course consists of an engineering design project and is well suited for the working engineer/computer scientist. The Program&,#146,s requirements are all contained within the 9 course requirement.
ucla-fig6
The program is structured in a manner that allows employed engineers/computer scientists to complete the requirements at a &,quot,part-time&,quot, pace (e.g., one EE100/EE200 level course per quarter for several quarters). However, the total time to complete the program will be at most two academic years plus one additional summer quarter. The program allows employed engineers and computer scientists to continue their technical education while being employed. The program is &,quot,... [Read More]

Electrical Engineering (Master Degree)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: IIT Armour College of Engineering
Training Center(s)/Venue(s): Chicago, United States
  V

The purpose of this degree is to prepare students for advanced study and/or research and industry in the field of electrical engineering. The Master of Science in Electrical Engineering (M.S.E.E.) is a degree program combining breadth across several areas of study within electrical engineering and specialization within one area, which includes an option to pursue thesis research under the guidance of a faculty adviser. Areas of study include communication and signal processing, computers and microelectronics, and power and control systems. The program is normally completed in three semesters of full-time study.

Students whose accredited B.S. degree is not in electrical engineering may pursue the M.S.E.E. provided that they have an adequate background and can demonstrate proficiency in the material contained in undergraduate courses equivalent to IIT&,#146,s ECE 211 and ECE 213 (Circuit Analysis I and II), ECE 218 (Digital Systems), ECE 307 (Electrodynamics), ECE 308 (Signals and Systems), ECE 311 (Engineering Electronics), MATH 251 (Multivariate and Vector Ca... [Read More]

Electrical and Computer Engineering (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Illinois at Chicago
Training Center(s)/Venue(s): Chicago, United States
  V

The department offers a comprehensive range of courses in the field of electrical engineering and computer engineering. Major research areas include bioelectronics and biomimetics, computer engineering, electromagnetics, device physics and electronics, and information systems.

Research facilities in ECE include the Nanotechnology Core Facility, a versatile MEMS/Nano facility, which also contains a microfabricaton laboratory with a 3,000 square-foot Class 100/1000 clean room that enables a broad spectrum of innovative multidisciplinary research, and, a microfluidics center for studying properties of nanodrops, Andrews Electromagnetics Laboratory, Communication and Sensing Laboratory, Computational Intelligence Laboratory, Computer Vision and Robotics Laboratory, Design Automation, Reconfiguration and Testing Laboratory, Laboratory for Energy and Switching Electronics Systems, Multimedia Communications Laboratory, Machine Vision Laboratory, Multimedia Systems Laboratory, Nanoengineering Research Laboratory, Signal and Image Research Laboratory.

Electrical Engineering (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of Houston
Training Center(s)/Venue(s): Houston, United States
  V

The Master of Science (MSEE) degree is a research-oriented degree and requires the completion of a thesis. A thesis describes the result of contemporary research capable of being published in a scientific or engineering journal and conducted under the guidance of a faculty advisor. Selection of an advisor is critical to completing the degree and therefore should be done as soon as possible.
Although the MSEE program is open to both part-time and full-time students, the MEE program (structured courses only) may be more appropriate for part-time students because of the research element of the MSEE. Changing to the MEE program from an MSEE program involving financial support requires approval of the advisor.

Electrical and Systems Engineering

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The University of Pennsylvania
Training Center(s)/Venue(s): Philadelphia, United States
  V

The Ph.D. program in Electrical and Systems Engineering (ESE) welcomes candidates with a strong background in science and engineering who are interested in pursuing an academic doctoral degree. The objective of this program is to help students develop skills needed to perform independent research and teaching in an exciting intellectual environment.

The Ph.D. program is focused on the develeopment of research skills to prepare the student for a life of scholarship in his/her field of interest. The heart of the course of study is the thesis research which culminates in the doctoral dissertation, a work of substantial original research which contributes to the body of knowledge available in a field. Additional coursework to continue the process of strengthening the command of the chosen discipline and to add to the inventory of mathematical skills is also required. The Ph.D. degree requires a minimum of 20 course units including thesis research. Up to 8 courses may be transferred from prior graduate work, this is subject to the approval of the Graduate Chair. Prio... [Read More]

Electrical Engineering (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The University of Pennsylvania
Training Center(s)/Venue(s): Philadelphia, United States
  V

Interconnections between electrical and systems engineering are creating a fresh vision of knowledge, its uses, and its users. This exciting synergy is evident in the recent merger of Penn’s electrical engineering and systems engineering departments. The Master&,#146,s Program in Electrical Engineering gives you the theoretical foundation and the interdisciplinary skills needed to deal with the new ideas and new applications that are the hallmarks of 21st Century Electroscience. A major advantage is that our master&,#146,s program allows you to tailor your education to you own interest and goals, from electromagnetics and photonics, sensors and MEMS, to VLSI and nanotechnology.

Electrical Engineering (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Temple University College of Engineering
Training Center(s)/Venue(s): Philadelphia, United States
  V

The Electrical and Computer Engineering Department offers practice oriented graduate level education and research concentrations that help students advance in their profession and prepare them for their doctoral degree.

The M.S. in Electrical Engineering can be completed on a full-time or part-time basis. Students can fulfill the degree requirements by either completing the research (master’s thesis or research project) or non-research (coursework-only) option. Students may complete 6 semester hours of thesis or a 3 semester hour research project carried out in conjunction with an industrial partner or a faculty mentor. Students can also complete a coursework-only option with the permission of the department graduate coordinator.

Electrical Engineering (Master Degree)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Arizona State University - Tempe Campus
Training Center(s)/Venue(s): Tempe, United States
  V

The electrical engineering faculty in the Ira A. Fulton Schools of Engineering offer a professional program leading to the MSE in electrical engineering. Graduate courses and programs are offered in the following six areas of specialization:

control systems (not an option for the online degree but available to on-campus students)
electromagnetics, antennas and microwave circuits
electronic and mixed-signal circuit design
electric power and energy systems
signal processing and communications systems
solid-state electronics
Courses are available on campus and online. The degree can be completed taking all classes on campus or all classes online.

Pages: 1 2 3 4 5 6 ...


Find Electrical Engineering training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
If you can not find a training course suitable for you instantly, you can leave your training request here and let trainers contact you later.



Electrical
Electrical Engineering
- Online/E-learning -
Electrical Engineering
Ask for Training
Add Courses