Electrical Machine Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Electrical Machine




Total 41 training courses and degree programs available around the world.

Electrical Machinery

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of AC and DC electro-mechanical energy conversion devices, theory, applications and control. Devices are tested and verified using electrical instruments.

Electrical Machines

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Sheridan College
Training Center(s)/Venue(s): Brampton, Mississauga, Oakville, Canada
  V

This course explores both the theoretical and practical aspects of electric machines. Starting with electromagnetism, the theory of generators is applied. Next DC motors, series, shunt and compound and their various characteristics are studied in detail. Both single phase and three phase motors along with machine design and characteristics are studied in detail. The final topic looks at various methods for speed control of motors. All topics include relevant laboratory applications.

Electrical Machines

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Nova Scotia Community College Kingstec Campus
Training Center(s)/Venue(s): Kentville, Canada
  V

This course provides knowledge and techniques for analysis of the flow of energy from the electrical power distribution system through the electrical machine to the mechanical load. The principles of magnetism and electromagnetic induction are applied to the various types of AC/DC motors and generators. Their construction, operating principles and performance characteristics are studied. Learners will analyze three phase circuits and dynamic interaction between electrical machines and their mechanical loads.

Electrical Machinery

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The Graduate School, UNC Charlotte
Training Center(s)/Venue(s): Charlotte, United States

Advanced theory of transformers and rotating. Machines, harmonic and saturation effects on machine performance. Unbalanced operation and transient conditions.

Electrical Machinery

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: The University of New Orleans
Training Center(s)/Venue(s): New Orleans, United States

Review of electric circuit theory and its application to electro-mechanical energy conversion, including the operation of dc, induction, and synchronous machines and transformers. This course carries no degree credit in the electrical engineering curriculum.

Certificate III in Electrical Machine Repair

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: SkillsTech Australia
Training Center(s)/Venue(s): Brisbane, Australia
  V

Motor through this Certificate III Electrical Machine Repair and you could land a job as an Electrical Fitter/Motor Rewinder or Electrotechnology Assembler. This apprenticeship program will provide you with skills associated with the overhaul and repair including rewinding, of motors, transformers and control gear.

What job opportunities will I have?

Please discuss future career aspirations and suggestions with your teacher during block attendance.

Do I need to have prior knowledge or work experience?

Participants must be employed as an apprentice and must have a registered training contract to be eligible to undertake training in this program. Year 12 mathematics and English is recommended but not compulsory.

What can I study after this?

Participants can continue in further studies in Certificate IV, Diploma or Advanced Diploma programs.

Power Tools - Safe Handling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Holmesglen
Training Center(s)/Venue(s): Chadstone, Melbourne, Moorabbin, Waverley, Australia
  V

This hands on instruction program covering safe power tool use and there applications are conducted by an experienced carpentry trainer. Understanding the benefits and limitations of each tool is a great place to start. Tools covered include: electric router, plane, saw, sander (orbital and belt), drill grinder, screw driver, drop saw, and compound sliding mitre saw and jigsaw. Students are required to provide some personal protective equipment for this course.

Students will:
?gain the skill to determine which power tool would be most appropriate for a given task
?learn the benefits and limitations of tool design
?learn the creative uses for power tools
?learn applied power tool safety and usage ?making things to develop skills
?gain the ability to undertake a risk assessment of a task and gain an understanding of how to manage these risks
?be able to use power tools confidently and safely considering others as well as the operators Occupational Health and safety
?understand the need for Personal Protective Equipment (PP... [Read More]

Machine Tool Technology (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Western Nevada College
Training Center(s)/Venue(s): Carson City, Douglas, Fallon, United States

The Machine Tool Technology program provides training for students who plan to enter the machine trades field and upgrading for those in the field who desire additional skills. The program is competency based, allowing students to enter at their own level and progress at their own pace. Hands-on learning is stressed, allowing students to take as many laboratory hours as possible.

Electrical Machines

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: North Lake College
Training Center(s)/Venue(s): Irving, United States

Direct current (DC) motors, single-phase and polyphase alternating current (AC) motors, generators, and alternators. Emphasis on construction, characteristics, efficiencies, starting, and speed control.

Electrical Technology

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: North Lake College
Training Center(s)/Venue(s): Irving, United States

The Electrical Technology program prepares the student for career opportunities by developing technical knowledge and practical skills necessary to enter or advance in the electrical technology field.

Electrical Design

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Dhanush Computer Services Pvt. Ltd.
Training Center(s)/Venue(s): Hyderabad, Delhi, India
  V

Types of electricity

Source of electricity

Generation, Transmission & distribution of electricity

Ohms law

Symbols

Definitations, Terms & terminologies

Important formulas

?Indian electricity rules

?National electrical code of India (NEC)

?National building code of India (NBC)

?Applicable standards issued by Bureau of Indian standards (BIS)

?Institute of Electrical & Electronics Engineers (IEEE)

?Regulations of local fire authorities.

?Requirements stipulated by Pollution control Board for Noise, Air &

?Water Pollution
.......

Electrical Machinery

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Westchester Community College
Training Center(s)/Venue(s): Mount Vernon, New Rochelle, Valhalla, White Plains, Yonkers, United States

Electromagnetic induction; characteristics and analysis of DC generators and motors, shunt series, and compound efficiency i voltage regulation; torque; speed regulation starting a DC motor; standards and rating; polyphase system; characteristics and analysis of the alternator; synchronous impedance, power factor, correction, and applications. Different motor designs are presented.

Electrical Machinery and Controls

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Delgado Community College
Training Center(s)/Venue(s): New Orleans, United States
  V

Principles, operating characteristics, efficiencies, ratings, and applications of DC and AC dynamos. Includes methods and devices for starting, braking, and controlling speed, voltage, and acceleration. Power distribution and transmission discussed, including primary substation and feeders, transformer primary switch gear and low voltage feeder protection, fault current calculations and wiring methods as applied to substation distribution and transmission lines

Motors, Drives and Automation Systems:Installation, Application and Maintenance

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: Electricity Forum Training Institute
Training Center(s)/Venue(s): Edmonton, Halifax, Ottawa, Richmond, Saskatoon, St. Johns, Toronto, Vancouver, Winnipeg, Canada
  V

This two-day Electric Motor Testing Training technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three concurrent sessions. The course will conclude with an operating demostration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.

The Electric Motor Testing Training course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues.

Power System Analysis

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: Electricity Forum Training Institute
Training Center(s)/Venue(s): Edmonton, Halifax, Ottawa, Richmond, Saskatoon, St. Johns, Toronto, Vancouver, Winnipeg, Canada
  V

Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
Recognize coordination related disturbances and outages.
Collect the required data to perform a detailed coordination study.
Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.
Who Should Attend:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

City & Guilds 2330 Electro Technical Certificate Level 3

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Liverpool Community College
Training Center(s)/Venue(s): Liverpool, United Kingdom
  V

The aims of the course are to provide knowledge and awareness of the techniques, craft skills, technology and related science required for electrical installation work. The course will also provide an understanding of the regulations and health and safety requirements governing electrical installation processes and knowledge of the organisation and structure of the industry within which these activities are carried out.

There is an extremely high demand for this course and early application is essential.

Please note that vocational qualifications nationally are changing to make the system easier to understand and more flexible. You will be able to build up your achievements in small steps and gain qualifications as you go. As soon as we have details, we will update our course information. There will be an opportunity to talk to tutors about developments in the areas you’re interested in at interview.

Testing and tagging of electrical appliances and leads (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Wodonga Institute of TAFE
Training Center(s)/Venue(s): Wodonga, Australia
  V

Ideal for small businesses, this 12-hour course provides training in the use of portable test equipment for the testing and tagging of electrical appliances and leads. You gain the skills and knowledge you need to visually inspect leads and appliances, and to use portable appliance testers.

What you learn

Course content includes:
electrical hazards and safety
Australian Standards AS/NZS3760 and AS3019
visual inspection
types of test equipment
appliance testing.

SAFETY TESTING OF ELECTRICAL APPLIANCES

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: CIT Solutions Pty Ltd.
Training Center(s)/Venue(s): Fyshwick, Reid, Dickson, Belconnen, Phillip, Hawker, Queanbeyan, Australia

Designed for non-trade people, this course will enable you to identify minor faults in basic electrical equipment and perform simple maintenance tasks in accordance with AS3760.

Testing & Tagging (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Sunshine Coast Institute of TAFE
Training Center(s)/Venue(s): Sunshine Coast, Australia

Sunshine Coast Institute of TAFE is running a training course/program about Testing & Tagging, or has provided such training courses/programs before. Please visit the official website of Sunshine Coast Institute of TAFE to check the availability of this course.

In-service Testing of Electrical Equipment

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: TAFE NSW - Illawarra Institute Wollongong Campus
Training Center(s)/Venue(s): Wollongong, Australia
  V

This course is for people seeking work in the inspection, testing and tagging of portable electrical equipment including portable socket outlets, extension leads and hand held 240 volt tools and appliances. You will learn how to provide safety testing of electrical cord assemblies and cord connected appliances, applying tagging, arranging for repair of faulty equipment and also to complete the required testing documentation.

Pages: 1 2 3


Find Electrical Machine training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
Try the search form on top of each page to find the latest course information, using course topic and location as keywords. Keep the course topic keyword short to get more results.



Electrical
Electrical Machine
- Online/E-learning -
Electrical Machine
Ask for Training
Add Courses