Motorcycle Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Motorcycle




Total 156 training courses and degree programs available around the world.

Motorcycle Safety Experienced Rider (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Anne Arundel Community College
Training Center(s)/Venue(s): Annapolis, Arnold, Baltimore, Edgewater, Gambrills, Hanover, Laurel, Severn, United States
  V

This six-hour course is for the licensed motorcyclist who wants to improve or refresh his or her skills. Classes are taught by both Motor Vehicle Administration and Motorcycle Safety Foundation certified instructors and held on AACC’s driving range, located on the Arnold campus. Individuals enrolling in this course must have a valid motorcycle license.

To enroll in this course, you must:
Be an experienced rider. (Your ability to operate a motorcycle will be evaluated by instructors. Riders who cannot demonstrate minimum riding proficiency will not be allowed to continue and will need to consider enrolling in the Basic Rider Course. Riders who are not allowed to continue will not be eligible for a refund and will have to pay an additional fee to be enrolled in the Basic Rider Course.)
Have your parents or guardians must sign a consent/release form, if you are under the age of 18
Wear protective clothing including a DOT certified helmet, eye protection, long sleeves, medium- or heavy-weight long pants, full-fingered gloves and over-the-ankle foo... [Read More]

Motorcycle Safety Basic Rider (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Anne Arundel Community College
Training Center(s)/Venue(s): Annapolis, Arnold, Baltimore, Edgewater, Gambrills, Hanover, Laurel, Severn, United States
  V

This 17-hour course is designed for beginning riders who have little or no riding experience. It includes seven hours of classroom and 10 hours of riding instruction on the basic riding skills and strategies necessary to practice street riding. It covers responsible riding, proper riding gear and defensive riding strategies. Students practice clutch-throttle control, stopping, turning, shifting and basic crash avoidance skills. Instructors are certified by both the Motor Vehicle Administration and Motorcycle Safety Foundation.

Course Requirements
The handbook will be handed out at walk-in registration. If you register by other means after walk-in registration, please take your receipt to one of the registration sites or the College Bookstore to obtain a copy of the handbook.

eCourse
The course now requires that you must take and successfully complete and online eCourse to prepare for the riding portion of your course. Once registered, you will receive an email with an attached letter listing your coupon code for the online course (the co... [Read More]

Motorcycle Safety Alternate Basic Rider (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Anne Arundel Community College
Training Center(s)/Venue(s): Annapolis, Arnold, Baltimore, Edgewater, Gambrills, Hanover, Laurel, Severn, United States
  V

Designed for individuals that have some riding experience, this seven-hour course provides another option way for individuals to earn a Class M license without having to take the full 17-hour basic course. All learning activities are conducted on the riding range located on the Arnold campus. Courses are taught by Motor Vehicle Administration and Motorcycle Safety Foundation certified instructors.

Requirements
You must bring a copy of your driver&,#146,s license or permit to walk in registration.
Students with out-of-state licenses will receive an MVA card but not a certificate of completion upon successful completion of the course.

Motorcycle Safety

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: FSU Corporate and Professional Development Center
Training Center(s)/Venue(s): Big Rapids, United States
  V

Ferris State University&,#146,s Corporate &, Professional Development offers the BRC (Basic Rider Course) and the RRC (Returning Rider Course). Courses are conducted with state funds from a motorcycle safety grant administered by the Michigan Department of State and are Motorcycle Safety Foundation approved and taught by MSF certified instructors.

Upon successful completion of either the BRC or the RRC class, which includes passing a final written and riding skills test, you will receive a completion card, good for one year that waives the riding skills and written test at the Secretary of State&,#146,s (SOS) office at the time of license application.

Motorcycle Service and Tune-Up Theory and Repair

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Los Angeles Trade Technical College
Training Center(s)/Venue(s): Los Angeles, United States

Lecture and laboratory experiences are given on routine motorcycle service and tune-up as well as trouble-shooting and repairing engine performance problems.

Motorcycle Technician

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Texas Southern University
Training Center(s)/Venue(s): Houston, United States
  V

Motorcycle Technician Module 1

Tools and Safety
•History of the Motorcycle
•Motorcycle Industry
•Safety
•Hazardous Chemicals
•Personal Protective Equipment
•Using Tools Safely
•Basic Hand Tools
•Power Tools
•Storing Tools
•Measuring Systems
•Fasteners
•Thread Repair
•Inspection of Threaded Fasteners
?Tightening and Torque
•Repairing Broken Fasteners

Motorcycle Technician Module 2
Engines and Cooling Systems
•Basic Engine Operation
•Engine Ratings
•Basic Four-Stroke Engine
•Basic Two-Stroke Engine
•Internal Combustion Engines
•Four-Stroke Engine Components
•Two-Stroke Engine Theory of Operation
•Two-Stroke Engine Induction Systems
•Engine Lubrication
•Friction-Reducing Devices
•Lubrication System Maintenance
•Lubricants

Motorcycle Technician Module 3
Fuel Systems, Drives, and Transmissions
•Fuel
•The Carburetor
•Fuel Delivery Systems
•Clutches
•Gears
•Primary Dri... [Read More]

Motorcycle

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: University of the Fraser Valley Continuing Studies
Training Center(s)/Venue(s): Abbotsford, Chilliwack, Canada
  V

Prerequisite: Must have Class 6 learner’s licence
In partnership with UFV, V-Twin Motorcycle School’s all-inclusive course features certified motorcycle instructors with backgrounds in adult
education and professional driving. Learn how to operate a motorcycle in a safe and structured environment under the direction of professional
instructors who emphasize five global skills: communication, observation, steering and balance, space margins, and speed control. This course helps you to prepare for the final Class 6 road test. Motorcycles and helmets are supplied. Course cost is $750 and consists of two classroom sessions followed by four riding sessions (parking lot and road ride). Students must select a riding session from the choices immediately following the classroom theory dates at the time of registration.

Motorcycle & Marine Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Vancouver Island University
Training Center(s)/Venue(s): Nanaimo, Canada
  V

This entry-level program is suited to individuals with all levels of mechanical experience and prepares students for careers as inboard/outboard marine technicians or motorcycle/outdoor power equipment technicians. Upon successful completion, students receive a VIU Motorcycle &, Marine Technician Certificate. Graduates also receive entry-level (Industry Training Authority Level I Apprentice) certification. The program encompasses theory, practical knowledge, and techniques essential to maintain and repair modern inboard/outboard marine, motorcycle, and other power equipment. Hands-on training with customer products is emphasized. Students are required to spend approximately one month on introductory basic mechanical skills prior to servicing customers&,#146, products.

Career Opportunities
Graduates of this program may find work as apprentice inboard/outboard marine technicians or motorcycle/outdoor power equipment technicians. Job opportunities exist throughout BC.

Graduates of this program may receive credit towards the technical portion of... [Read More]

MOTORCYCLE RIDING (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Clair College Continuing Education
Training Center(s)/Venue(s): Windsor, Canada
  V

This Canada Safety Council Motorcycle Training Program provides on the bike practical instruction for the beginner: no previous experience is necessary. While most of the course is practical, information is also given on: motorcycle maintenance, defensive driving, risk awareness and rules of the road. The course provides motorcycles, fuel and lubricants, expert instruction, written materials, student kit and testing and evaluation for your M2 Motorcycle Driver&,#146,s license. Please note: Canada Safety Council certificates will only be awarded to students upon successful completion of the training hours AND testing. Students are to meet in the main lobby for all motorcycle courses, prior to the course start time.

M2 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Loyalist Training & Knowledge Centre
Training Center(s)/Venue(s): Belleville, Canada
  V

Motorcycling is inherently risky. Although we strive to provide a very safe training environment, there is still a risk of injury. These courses are strenuous, tiring, mentally and physically challenging. On an average course, a couple of people may have a minor accident and receive scrapes to knees and other body parts. A few people during the training season may incur more significant injuries such as fractures and sprains. You will be required to sign a waiver of claim prior to taking our course. If these risks are unacceptable to you, and you do not wish to sign the waiver, please do not register.

You will also understand:

· Balancing and braking

· Cornering

· Collision avoidance

· Road riding

· Emergency braking

· Cold starting

· Emergency techniques

· Pattern riding

· Correct gear changing

· Signals and shoulder checks

· Clutch operation and control s... [Read More]

Introduction to Motorcycling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Loyalist Training & Knowledge Centre
Training Center(s)/Venue(s): Belleville, Canada
  V

This is a Canada Safety Council approved program which will serve to introduce the student to the basics of riding a motorcycle. It is a three hour course, all of the time spent on the bikes. Come ready to ride!

The topics covered include:

· Mounting a Motorcycle

· The Ready Position

· Controlled Braking

· Proper Use of Eyes

· Locating the Controls

· Starting the Motorcycle

· Using the Gears

· Proper Use of the Clutch

· The Flat Wrist Technique

· Proper Riding Position

· Move Off and Stop



The course is taught by accredited and experienced Canada Safety Council Instructors. It will allow students to gain an understanding of the basics of riding and should help to dispel any concerns that they may have about operating a motorcycle. An M1 license is not required to take this introductory course.

Location: All courses are held ... [Read More]

Motorcycle Training - Basic

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Georgian College
Training Center(s)/Venue(s): Barrie, Canada
  V

This 19-hour course includes both classroom and on-the-bike segments. Motorcycles are provided for the course. Individuals successfully completing all instruction and the final test (M1 Exit) will be eligilbe to receive an M2 license. Participants must be 16 years of age for licensing purposes. Participants must have the M1 licence at the start of course in order to move to M2.
Note: Georgian College is authorized to administer the Level One (M1) Exit Test. After successful examination of driving skills, forms are signed by the examiner, an approved signing authority, and returned to the MTO for processing. Individuals must have an M1 learner permit in order to take the test. The test is offered at the end of the Motorcyle Training-Basic course. Text: materials included

Motorcycle Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College
Training Center(s)/Venue(s): Toronto, Canada
  V

Program Highlights •There is an earn-while-you-learn training approach
•Professors with extensive, current experience in industry teach the courses
•State-of-the-art facilities are at the province&,#146,s largest transportation training centre
•You may qualify for income support while in school, through Employment Insurance Canada benefits or training allowance
•In-school training is geared to on-the-job experience

The apprenticeship program consists of both on-the-job and in-school training. The actual duration will be determined by how quickly the apprentice acquires the on-the-job competencies.

During in-class training, students will be required to successfully complete the following courses:


•Power Trains
•Fuels/Electrical
•Engines
•Applied Work Practices
•Brakes &, Chassis
•Frames &, Suspension

Motorcycle and Powersports Product Repair Techniques (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College
Training Center(s)/Venue(s): Toronto, Canada
  V

Housed within Canada&,#146,s Transportation Training Hub, this program opens the door to a career in the motorcycle, powersports and small engine industries ?even if you have no previous experience.

You will acquire the theoretical knowledge and practical skills on a wide variety of products to ensure you have a competitive edge in these fields.

Motorcycle and Powersports Repair Techniques provides training based on the small engine and Level 1 Motorcycle technician apprenticeship curriculum, with some valuable additions leading to a Centennial College Certificate. In addition to the complete range of technical training, the course areas include workplace practices, welding, mechanical systems, health &, safety in the workplace, computers, math, communications and potential certification in manufacturer parts and service online systems.

Our commitment to the pursuit of excellence in the delivery of education and training has lead to the assessment of the program by the Canadian Automotive Repair and Service Council (CARS). The CA... [Read More]

Motorcycle Maintenance (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College School of Continuing Education
Training Center(s)/Venue(s): Toronto, Canada

This program is designed to provide training for motorcycle mechanics and apprentices to improve skills and employment opportunities. It is ideally suited for the motorcycle owner or enthusiast who really wants to get serious.

Motorcycle Exam Preparation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College School of Continuing Education
Training Center(s)/Venue(s): Toronto, Canada

This theory based course prepares uncertified trades people to write the Ontario Motorcycle mechanics certificate of qualification exam. You will cover chassis, suspension, wheel and tires, brakes, engines, power tranfer, electrical, management, fuels and exhaust.

Motorcycling

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College School of Continuing Education
Training Center(s)/Venue(s): Toronto, Canada
  V

The Gearing Up Introduction course introduces you to motorcycle riding.
This 3-hour course is designed to provide those who feel they may need a bit more practice prior to taking the Motorcycle Rider Training Course offered at Centennial College or for those who arent sure if motorcycling is for them and want to give it a try without investing a lot of time and money. This is a practical hands-on course.

Gearing Up Motorcycling Rider Refresher

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College School of Continuing Education
Training Center(s)/Venue(s): Toronto, Canada
  V

This 8-hour Canada Safety Council refresher course is designed for experienced motorcycle riders with a valid M2 or M licence. Brush up on riding skills already learned from a previously taken Gearing Up Motorcycle Rider Training program. For licenced motorcyclists who have had no formal training, you will learn skills to improve your confidence and riding ability. The course is made up of two hours classroom theory and six hours practical riding. It is mandatory for you to demonstrate entry level riding ability in braking, shifting and riding techniques by passing the first level of the MOST II test at the beginning of the course. Practical riding exercises include slow speed manoeuvres, push steering, emergency braking, emergency swerving, collision avoidance and negotiating curves. Upon successful completion of the course, a Canada Safety Council graduate certificate will be provided.

Advanced Rider Training

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Centennial College School of Continuing Education
Training Center(s)/Venue(s): Toronto, Canada
  V

This course is designed for riders who wish to enhance their street riding skills. It also appeals to those who completed the M1 motorcycle course, purchased a motorcycle, and now wish to practice their skill on their own motorcycle. The course consists of three hours of classroom theory followed by six hours of coaching by certified motorcycle instructors.
NOTE: THIS COURSE IS CONDUCTED ON PUBLIC ROADS AND HIGHWAYS
Practical training segment includes, slow speed maneuvers, road management skills and street proofing, intersections, curves riding techniques, collision avoidance and emergency braking, rural and expressway riding.

MANDATORY REQUIREMENTS
Must attend all classes of the section you are registered for in their entirety (no exceptions).
Must provide own road-worthy, licenced motorcycle/scooter (over 50cc) proof of ownershipp and Liability Insurance Certificate.
Must posses a valid M2 or M2L or M licence.
At all times during the practical segment, students must wear proper riding gear, DOT approved helmet, a sturdy ... [Read More]

Motorcycle Repair

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: New Brunswick Community College
Training Center(s)/Venue(s): Moncton, Canada
  V

Ever dream of driving down the highway, wind blowing through your hair, while you drive your very own motorcycle? Then, without warning, it starts making a funny noise and breaks down. With the Motorcycle Repair program, you could be the one to fix the problem. This program prepares you to inspect, service and repair motorcycles, all-terrain vehicles and other related equipment. In the shop, you&,#146,ll learn to use hand and power tools, shop equipment and measuring instruments. In the classroom, you&,#146,ll focus on the operation, diagnosis and repair of motorcycle systems, covering both two and four stroke engines, carburetion, fuel injection and electrical systems.

What You Will Learn

Workplace Safety
Electrical and Electronic Systems
Engine Maintenance
Engines and Engine Components
Brakes, Wheels and Tires
Transmissions
Vehicle Service
Chassis
Welding and Cutting

Pages: 1 2 3 4 5 6 ...


Find Motorcycle training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
If you can not find a training course suitable for you instantly, you can leave your training request here and let trainers contact you later.



Automotive
Motorcycle
- Online/E-learning -
Motorcycle
Ask for Training
Add Courses