Power Supply Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Power Supply




Total 91 training courses and degree programs available around the world.

Reliability Operator Certification Exam Prep

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States

Want to learn Reliability Operator Certification Exam Prep? Online Institute of America has such training program available, or provided Reliability Operator Certification Exam Prep training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with Online Institute of America's representative directly.

Blackout

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States

The Blackout 2003 training includes lessons on emergency preparedness and how to act on emergency situations such as blackouts. Certificates (NERC-approved) will be given to those who finish the course.

NERC Compliance

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States

The NERC Compliance training provides an introduction and overview of key NERC standards and their importance. Certificates (NERC-approved)will be given to student who finish the course.

Generators and Emergency Power

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States
  V

This 10 Hour course on Generators and Emergency Power is approved for CEUs in the State of Maryland, Delaware and Virginia. Purpose Of Seminar: In today&,#146,s world, reliable power is required in many buildings and institutions and in many ways, is helping to drive the electrical industry. Places of business, hospitals, schools, commerce centers, mission critical facilities are demanding emergency generators to supply their emergency and standby power requirements. Even homeowners are asking for a reliable and safe solution for power needs in their own homes. This course will teach and equip the student in the National Electric Code as well as other NFPA codes that are required for emergency and standby installations and designs. Who Should Take This Course: Electrical Contractors, Electrical Estimators and Designers, Electrical Engineers, Electricians, Journeyman Electricians and other electrical professionals associated with emergency and standby generators, UPS and related systems. Course Agenda: Articles covered: 225 Outside Branch Circuits and feeders 240 Overcurr... [Read More]

NEC 220 Generator Load Calculations

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States
  V

Earn CEU Credits towards your license renewal while learning generator sizing and load calculations and how to comply with NEC article 220 Students will learn how to size a generator for the jobsite, how to size the correct automatic transfer switch for the generator, what the difference is between whole house and selected circuit, basic wiring, and how to install an automatic transfer switch through class lecture and hands on demonstrations. Class is approved for 4 hours of CEU Credits for New Jersey &, Maryland State Licenses, Caroline, Harford, Queen Anne &, Wicomico Counties. (CEU Approval Pending: Cecil County, PG County, Delaware, Virginia, &, North Carolina)

NEC 702 Standby Generator 101 (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States
  V

Earn CEU Credits towards your license renewal while learning standby generator basics and how to comply with NEC article 702 Students will learn how generators work, the basic components of standby generators, sound levels and testing while developing product knowledge of automatic standby generators through class lecture and hands on demonstrations. Class is approved for 4 hours of CEU Credits for Maryland’s State Licenses, Caroline, Harford, Queen Anne &, Wicomico County. (CEU Approval Pending: Cecil County, PG County, Delaware, Virginia, &, North Carolina)

Fixed Ground Power & Pre-Conditioned Air Systems

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: Equip Global Pte Ltd
Training Center(s)/Venue(s): Singapore, Singapore
  V


Key issues to be addressed at this Training Course Include:
�Enhancing operational performances of Ground Power and PCA systems
�Substantially reducing emissions and improve fuel consumption efficiency and fuel conservation from conventional ground power or electric mobile power units
�Optimise long-run operational costs through improved procurement criteria and strategies
�Achieving optimal usage of FEGPs on aircraft turnarounds
�Mitigate potential environmental and noise concerns in airports�long-term future operation
�Save energy demands from associated with moving mobile ground support equipment and eliminate the needs for recharging infrastructure
�Ensuring effectiveness in implementing, operating and maintaining fixed energy assets

This professional training course is designed for:

Directors, Heads, Managers, Electrical Engineers, Inspectors, Surveyors and Specialists of:

· Airports�technical services

· Operation/Airport operators

· Faciliti... [Read More]

Airport Power Systems Installation & Maintenance

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: Equip Global Pte Ltd
Training Center(s)/Venue(s): Singapore, Singapore
  V

Key Benefits of Attending the Airport Power Systems Maintenance &, Installation Training Course:
�Enhancing effectiveness of preventive and predictive maintenance

�Identify and preventing potential electrical issues with LEDs lighting installations

�Tools and technologies that reduce the costs of maintaining HVAC systems while improving machines�lifetime and temperature monitoring

�Improving both preventive and predictive maintenance techniques for power generator systems

�Establishing an integrated automation system that proactively monitor and fast respond to power outages

�Optimise operational costs on electrical power maintenance and long-term device procurement

�Learn from case studies on testing and commissioning of electrical equipment for expansion and extension projects

�Assessing the lightning risks and improvements of lightning protection systems

�Consolidate the safety and security of Airfield’s lighting systems

�Hear and discus... [Read More]

Distribution High Voltage Operator (Initial Training)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia

Want to learn Distribution High Voltage Operator (Initial Training)? Federation Training has such training program available, or provided Distribution High Voltage Operator (Initial Training) training courses in the past. It may also provide you a customized or flexible training solution according to your specific requirement. Please click on the training course title to find the contact information and discuss your study plan with Federation Training's representative directly.

Distribution High Voltage Operator (Refresher Training)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia
  V

This refresher course covers the carrying out of high voltage switching operations involving the operation of circuit breaking and isolation devices from a given switching schedule and according to enterprise procedures. It also encompasses the process of, communicating with the Switching Control Officer or Electrical Control Officer, isolating the electrical equipment and the line or work site, as well as proving that the area is de-energised and earthed, issuing/accepting electrical permits and the returning of the affected circuits to service.

Power System Fundamentals for Non-Electrical Professionals

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

The course explains the fundamental principles of electric power system. It describes step by step what constitutes an electric power system, how it works, what are the associated components of a power system and their functionalities, why blackouts occur, what are the mitigation measures and which are the institutions that carry out those measures.

The course also describes the latest developments in power system like smart grid, its components and their applications in transmission and distribution.

Course Outline:
Electricity Basics
What Constitutes a Power System
Active and Reactive Power
Single and Three Phase Systems
Distribution and Transmission Systems Overview
Overhead Systems
Power System Faults and Protections
How Stable is Our Power System
Power System Reliability
Blackouts and Causes &, Who Ensures Reliability of our Power System
Distributed Generation &, Smart Grid

Who Should Attend
Regulators �Legal services�Engineers from disciplines other than electrical e... [Read More]

Power System Analysis for Industrial Application

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

This course aims to make electrical systems safer. A balance of theory and practice will provide a firm foundation of knowledge for your next design or construction project as well as for field service work. The course material will prepare you to correct electrical system problems and improve safety and efficiency. Additionally, a case study will be used to discuss short circuit, protective device coordination and arc flash analysis and mitigation in an industrial plant.

Course Outline:
Electrical safety &, short circuit
Conductor short circuit calculation
Motor contribution
Relay fundamentals
Coordination of devices
Ground Fault devices
Overcurrent relays
Transformer protection
Arc flash
Single line diagram &, system modeling

Who Should Attend
Electrical Engineers �Technicians &, Technologists �Facility &, Plant Engineers �Design Engineers �Supervisors �Field Engineers �Electrical Contractors

Power Quality Audit: Industrial and Commercial Applications

Course Format: On-Site / In-House / Private Tutoring
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

Learning Objectives
Identify power quality indices
Recognize symptoms of power quality problems including sags, swells, under or overvoltage, harmonics, transients, interruptions, wiring and grounding issues
Classify power quality events according to IEEE and public utility standards
Explain proper application and interpret results of power quality monitoring equipment
Recommend viable solutions to power quality problems
Introduction to Power Quality Analysis
•Review of Industrial Power Systems Concepts
•Power Quality Definitions and Indices
•Equipment Ratings
•Effects of Disturbances on Equipment and Processes
Industry Commitment to Power Quality
•IEEE Standards and Recommendations
•EPRI Survey Results
Harmonics
•Sources of Harmonics
•Symptoms and Effect on Equipment
•Power Factor Correction Capacitors and Resonance
•Harmonic Limitations (IEEE Standard 519)
•Series Resonance and Filter Design
•Third Harmonic Neutral Current
Calculation of Harmonic Voltages and Currents<... [Read More]

Modern Power System Protective Relaying

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

Protection of low, medium &, high voltage power systems requires an understanding of system faults &, their detection, as well as their safe disconnection from the power system. This course presents a comprehensive &, systematic description of the concepts &, principles of operation &, application of protection schemes for various power system elements such as feeders, transformers, motors, buses &, generators.

This course deals with protection systems from a practical perspective &, includes important functional aspects such as testing &, coordination of protection systems. It is specially designed for industries &, utilities which depend on proper system protection for operational efficiency &, minimizing damage to equipment.

Course Outline:
Power System Faults
Components of Power System Protection Schemes
Current Transformers &, Voltage Transformers
Feeder Overcurrent Protection
Coordination of Electrical Protection Systems
Motor protection
Bus Protection
Transformer Prote... [Read More]

High and Medium Voltage Substation Design, Testing and Maintenance

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

A properly planned and designed substation is essential for the reliable operation of a power system network. A high voltage substation is comprised of switching equipment, transformers, reactors, var compensators, protection, control, and automation and communication.

This course covers all aspects of high and medium voltage substation design, including regulatory and environmental requirements, general design considerations, and the application of switching and power equipment, fault calculations, safe grounding design, protection/control, automation and communication, and maintenance considerations.

Who Should Attend
Electrical Engineers �Design Engineers �Managers &, Team Leaders �Substation Engineers �Consulting Engineers �Field Engineers �Technicians �Technologists

Course Outline:
Industrial &, utility substation
Fault calculations
Application of circuit breakers
Substation equipment
Insulation co-ordination
Grounding design considerations
GIS application
Shunt capacitor app... [Read More]

Grounding Audit: Measurements, Analysis and Design

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

This webinar aims to make grounding and bonding of electrical systems a less daunting process. A balance of theory and practice will provide a firm foundation of knowledge for your next design or construction project. The webinar material will prepare you to correct problems in your electrical system and improve safety, efficiency, and power quality. Additionally, a case study will be used to discuss grounding and bonding applications in a substation, reinforcing fundamental principles.

Objective
To familiarize participants with the fundamentals, applications, and necessity of electrical grounding and bonding techniques, thereby improving personnel safety and operations efficiency.

Who Should Attend
Electrical engineers �design engineers �electrical engineering managers �project managers �power quality specialists �maintenance managers �consultants �electronics and controls personnel �technologists

Fundamentals of Power System Short Circuit Analysis

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: EPIC Educational Program Innovations Center
Training Center(s)/Venue(s): Dorval, Edmonton, Calgary, Halifax, Mississauga, Ottawa, Regina, Richmond, Saint Johns, Winnipeg, Canada
  V

This course is designed to provide a basic understanding of power system short circuit calculations and analysis. It will provide the student with the background knowledge on which the modern day computer software programs are based. It will include a review and use of “Symmetrical Components�and the KVA/MVA method to determining short circuit parameters.

Course Outline:
The Importance of Short Circuit Knowledge
Types of Faults
Fault Parameters
KVA or MVA Method Fault Calculation &, Coordination
Fault Calculation/Coordination Example Using KVA/MVA Method
The Per-Unit (PU) System Review
Symmetrical Components
Asymmetrical Three Phase Fault Analysis
Examples of Short Circuit Calculations
Real Time Balanced and Unbalanced Fault Recorder Analysis

Who Should Attend:

Those looking to work in the protection and control area of power systems and wish to have a more comprehensive understanding of the basic workings of this area, including:
Students �Managers �Engineers �Technologists �M... [Read More]

Signal Processing for Power Systems

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Colorado State University OnlinePlus
Training Center(s)/Venue(s): Fort Collins, United States

Signal processing tools for analyzing power systems, voltage frequency, magnitude variations, unbalance, wave form distortion.

Electric Power Quality

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Colorado State University OnlinePlus
Training Center(s)/Venue(s): Fort Collins, United States


Interconnecting power electronic devices and renewable energy sources to power systems.

Power Engineering (Master Degree)

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: IIT Armour College of Engineering
Training Center(s)/Venue(s): Chicago, United States
  V

The purpose of this degree program is to prepare students for leading edge positions in industry in the areas of electric power, power electronics, motor drives, and electric machines. The Professional Master of Power Engineering is a course-only degree program that prepares students for professional practice in power engineering.

The admission requirements for the proposed degree will follow the existing admission requirements for such professional master’s degrees in ECE Department. Students whose accredited B.S. degree is not in electrical engineering may pursue the professional master’s degree provided that they have an adequate background and can demonstrate proficiency in the material contained in undergraduate courses equivalent to IIT’s ECE 211 and ECE 213 (Circuit Analysis I and II), ECE 311 (Engineering Electronics), ECE 319 (Fundamentals of Power Engineering), MATH 251 (Multivariate and Vector Calculus), and MATH 252 (Introduction to Differential Equations). A student may demonstrate proficiency by successfully completing the courses or by demonstratin... [Read More]

Pages: 1 2 3 4 5


Find Power Supply training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Tips:
You do not need to register before you can use most of our services. You will get a code for each posting ever made on this website. It is the key for you to remove the posting anytime by yourself.



Electronics
Power Supply
- Online/E-learning -
Power Supply
Ask for Training
Add Courses