Turbine Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Turbine




Total 74 training courses and degree programs available around the world.

Gas Turbine Power Generation

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States

This training series gives an overview of Gas Turbine Power Generation with particular focus the processes and equipment involved to generate power. It discusses the following topics in detail: construction and design features of turbines, support system and auxiliaries, operation, maintenance and protection of systems, combined cycle generation, and heat recovery steam generation.

Turbine Engine Overhaul

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers the history, theory, construction and principles of operation of turbine engines, including removal, installation, maintenance, testing, adjustment, hot section, inspection and overhaul.

Gas Turbines �Type, Application, Selection and Design Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Rebis Academy
Training Center(s)/Venue(s): Toronto, Canada

Gas Turbines �Type, Application, Selection and Design

Steam Turbines �Type, Application, Selection and Design Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Rebis Academy
Training Center(s)/Venue(s): Toronto, Canada

Steam Turbines �Type, Application, Selection and Design

Process Efficiency for HVAC Systems, Engines, Turbines, ... Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Southway Hotel
Training Center(s)/Venue(s): Ottawa, Canada
  V

This course will describe the best practices that can be applied to engines, turbines, steam generators, pumps, and heat exchangers.

Detailed analysis of thermal efficiency of different industrial applications will be presented. Based on different parameters, it will be shown how the system can be optimized, which can result in an increase of the overall efficiency. The course will also present the effect of piping thermal insulation and thermal efficiency improvement techniques will be discussed.

Objective:

This course will enable participants to:

- Interpret and review the thermodynamics and heat transfer processes in process equipment in order to apply appropriate thermal efficiency improvement techniques.

- Identify and analyze principles of thermal design of process equipment.

- Estimate the degree of inefficiency of process equipment and the way to improve its efficiency.

- Analyze and interpret problems in everyday operations and find the optimal solution.

On Thursday April 23, ... [Read More]

Computer Simulation of Gas Turbines Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Best Western Village Park Inn
Training Center(s)/Venue(s): Calgary, Canada
  V

This course will provide a comprehensive understanding of computer simulation of gas turbines, as well as their selection criteria, operation and maintenance requirements, and economics.

Description:-
This seminar provides indepth understanding of computer simulation of gas turbines under steady-state and transient conditions. The selection considerations and applications of co-generation and combined cycles are also covered in this seminar.

The analysis performed by gas turbine simulators provides the following benefits:
1) Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.
2) Determination of essential gas turbine maintenance activities to reduce the duration of the outage.

The simulation program is capable of simulating the following parameters to determine their effects on gas turbine performance, turbine creep life, environmental emissions, gas turbine life cycle cost, revenue, and profitability: variations in ambient temperature and pressure, inlet an... [Read More]

Process Efficiency for HVAC Systems Engines Turbines Pumps and Steam Generators Workshop

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Toronto Airport West
Training Center(s)/Venue(s): Mississauga, Canada
  V

Available In-class and via Webinar.

This course will describe the best practices that can be applied to engines, turbines, steam generators, pumps, and heat exchangers. Detailed analysis of thermal efficiency of different industrial applications will be presented. Based on different parameters it will be shown how the system can be optimized which can result in an increase of the overall efficiency. The course will also present the effect of piping thermal insulation. Thermal efficiency improvement techniques will be discussed.

Objective:
This course will enable participants to:
Interpret and review the thermodynamics and heat transfer processes in process equipment in order to apply appropriate thermal efficiency improvement techniques.
Identify and analyze principles of thermal design of process equipment.
Estimate the degree of inefficiency of process equipment and the way to improve its efficiency.
Analyze and interpret problems in everyday operations and find the optimal solution.

Target Audience:
Engine... [Read More]

Wind Turbine Materials and Electro-Mechanical Equipment

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Houston Community College
Training Center(s)/Venue(s): Houston, United States

Identification and analysis of the components and systems of wind turbine.

Wind Energy Professional

Course Format: Online / Virtual Classroom / Webinar
School/Trainer: Anderson University
Training Center(s)/Venue(s): Anderson, United States
  V


Wind energy companies are growing exponentially to meet America&,#146,s demand for clean, renewable, domestic energy. This entry-level Wind Energy Professional Online Training Program prepares you for a career in the wind energy industry. This online certificate program is offered in partnership with major colleges, universities, and other accredited education providers.

Objectives

Upon successful completion of this program, you’ll be able to:
•Describe the evolution of wind turbine technology
•Discuss air flow characteristics and blade efficiencies
•Assess human resources and business planning policies, procedures, and processes
•Explain contract management, fulfillment, and liability to the landowner and manufacturer
•Discuss wind business policies and procedures
•Explain atomic structure and basic values such as voltage, current, resistance, and power
•Summarize the principles of magnetism
•Utilize electrical measuring instruments
•Display competence in principles and operation of basic hydraulic... [Read More]

Wind Energy Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: MIAT
Training Center(s)/Venue(s): Canton, Houston, United States

In an effort to stay at the forefront of technical education and prepare our students for the dynamic and changing world of renewable energy production, MIAT has chosen to create a Renewable Energy Program that currently offers a Wind Technician Certificate.

Wind Turbine Electrical Safety Protocol

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Lights College
Training Center(s)/Venue(s): Dawson Creek, Canada
  V

- Wind Turbine Electrical Safe work practices
- Application of the Canadian Electrical Code (CEC)
- Wiring practices
- Rules of the CEC

Learning Outcomes:
Upon successful completion of this course, learners will be able to:

- Describe safe work practices when working on wind turbines
- Identify safety gear for electrical work (PPE)
- Describe safety equipment used in electrical work
- Apply the CEC to appropriate electrical work
- Utilize safe work practice in lab mock ups

Wind Turbine Tower and High Angle Rescue, Climbing, and Personal Protective Equipment

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Lights College
Training Center(s)/Venue(s): Dawson Creek, Canada
  V

- Personal protective equipment utilization and maintenance
- High angle rescue considerations and practice
- Tower rescue practices
- Tower climbing safety practices

Learning Outcomes:
Upon successful completion of this course, learners will be able to:

- Identify personal protective equipment components and their application
- Describe safe rescue practices during emergency situations
- Safely climb 100 meter towers
- Participate in high angle rescue procedures
- Engage in partnered rappelling and climbing exercises
- Complete climb and descent procedures

Wind Turbine Safety

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Lights College
Training Center(s)/Venue(s): Dawson Creek, Canada
  V

- Working with contractors
- Engineering considerations
- Road works and site prep safe work practice
- Equipment safe work practice

Learning Outcomes:
Upon successful completion of this course, learners will be able to:
- Identify hazards when working in the wind park environment
- Describe safe work practices when working on construction sites
- Identify safe work procedures during equipment assembly
- Describe safe work practice related to multiple activity sites

Wind Turbine Maintenance Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Northern Lights College
Training Center(s)/Venue(s): Dawson Creek, Canada
  V

Students explore the theory supporting wind turbines and the practical maintenance procedures required to maintain turbine output. Upon completion of the program, students are prepared to enter the field as wind turbine technicians, or to progress to higher levels of certification in the industry.

Upon successful completion of the Electrical portion of the program, students will write the provincial Electrical Level 1 Apprenticeship exam. Graduates also are eligible to write the BZEE Certification Examination to start the process of obtaining international certification.

Career Prospects

Wind Turbine Maintenance Technician. Demand is strong not only in North America, but in Europe as well.

Wind Turbine Technician (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Lawrence College
Training Center(s)/Venue(s): Kingston, Canada
  V

The Wind Turbine Technician program will provide students with in depth knowledge and hands-on experience of the electrical and mechanical aspects as they relate to wind turbines. You will also learn fiberglass repair techniques as they relate to wind turbines. You will receive safety training for working at heights and in confined spaces. In order to
complete this program, you must have no fear of heights and you must be physically fit.

Career Highlights
The Wind Power Industry is one of the fastest growing industries in Canada. The demand for trained and certified Wind Turbine Technicians is also growing rapidly.

As a Wind Turbine Technician you will be at the forefront of a new and growing industry. You will be working with modern technology in a demanding environment. It will be your responsibility to install and carry out scheduled preventative maintenance on large size wind turbines as a member of a maintenance team. This will include performing inspections, taking measurements and providing documentation. You will be called upon to d... [Read More]

Gas Steam Turbines

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Clair College
Training Center(s)/Venue(s): Windsor, Canada
  V

This course is designed to familiarize the student with heat engines, prime movers, steam turbines, cooling towers, gas turbines, gasoline and diesel engines. Studies include theoretical and practical applications, the principles of operation, equipment construction and the components to ensure safe and efficient operation. Types of pumps and principle of operation is covered. Air compressors and lubrication principles are taught emphasizing both on theoretical as well as practical operation. Finally, the course covers the types of plants found in the power engineering field such as hot oil systems, gas plants, pulp and paper mills, refineries, sawmills and food processing plants.

Wind Turbine Site Assessment & Installation

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: St. Clair College
Training Center(s)/Venue(s): Chatham, Canada
  V

Students will learn the steps to perform wind site assessments of a home or business. Class content will cover measuring wind energy potential, load analysis, site selection, system types, system sizing and efficiency measures, and energy output estimation. The course will cover safety, system design, layout and turbine performance, as well as the electrical integration of a wind system including component selection, wiring techniques, installation techniques, and troubleshooting techniques including both bench-top and field maintenance of wind turbines.

Power Generation: Gas Turbines, Co-Generation, Combined Cycle Plants, Wind Power Generation, and Solar Power (1.8 CEUs)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Global Innovative Campus
Training Center(s)/Venue(s): Edmonton, Canada
  V

Description

This seminar will cover all aspects of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants. This seminar will cover in detail all the components of these types of power plants such as: compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, transformers, and generators. The design, selection considerations, operation, maintenance, pay-back period, economics of co-generation plants and combined cycles, as well as, emission limits, reliability, monitoring and governing systems are also covered in detail. This seminar will also provide up-dated information in respect to all the significant improvements that have been made to co-generation, combined cycles plants, wind and solar power generating plants during the last two decades.

This seminar will illustrate through sophisticated computer simulation how gas turbines, co-generation and combined cycle plants perform under steady-state and tra... [Read More]

Gas Turbine Engines

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Saskatchewan Indian Institute of Technologies
Training Center(s)/Venue(s): Prince Albert, Regina, Meadow Lake, North Battleford, Saskatoon, Yorkton, Canada

A course designed to familiarize the student with the principles of gas turbine engine operations. Activities focus on learning to test, inspect, disassemble, and reassemble engines.

Wind Turbine Technician (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment
School/Trainer: Holland College
Training Center(s)/Venue(s): Charlottetown, Canada
  V

The global market for wind energy is expanding faster than any other source of electric energy. Our increasing interest in reduction of non-renewable fuels, and greenhouse gases has made wind energy very attractive. Wind energy is a sustainable form of energy. It does not use fuel, and does not produce greenhouse gas. PEI is establishing itself to be one of the most progressive renewable energy leaders in North America.

Training for a Wind Energy program requires cross-training in relevant trades that also offered at Holland College. The program’s location on the Summerside Waterfront Campus is ideal because of its proximity to the Wind Energy Institute of Canada site at North Cape, and to a number of wind farms.

Pages: 1 2 3 4


Find Turbine training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - Pakistan - Philippines - Singapore - South Africa - United Arab Emirates - United Kingdom - United States



Facts:
We provide free training course catalog service since 2003, in English and Chinese. Tens of thousands of visitors search our database from our portal and partners' websites each day.



Engineer
Turbine
- Online/E-learning -
Turbine
Ask for Training
Add Courses