Automotive Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Automobile/Vehicle Repair




Total 800 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Popular courses:
Automotive Technology
Automotive Service Technician
Automotive Technician
AUTOMOTIVE
Automotive Service Advisor
Automotive Engineering


Advanced Race Chassis and Body Fabrication

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is an advanced study of race chassis, body fabrication and body alignment. This course will also include advanced sheet metal forming.

Alternate Technology Vehicles

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States
  V

This course is the study of vehicles powered with gasoline engines in combination with other non-gasoline power systems. Hybrid, Fuel Cell, compressed gases and diesel/bio-diesel and Homogeneous Charge Compression Ignition (HCCI) technology will be covered in this course. Additional topics include hybrids, light duty diesels, and 100% electric vehicles.

Automotive Air Conditioning

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of the principles of refrigeration, operation, and testing procedures to determine the cause of malfunction, servicing, or repairing by approved methods. Emphasis is on special tools, equipment, and safety procedures.

Automotive Accessories

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of devices and systems considered accessories by the automotive industry. Study includes windshield wiper systems, power door locks, windows and seats, radios, and clocks.

Automatic Transmissions

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a basic study of power flow and hydraulics, including torque converter operation.

Automotive Electricity

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of electricity as used in automotive applications. This course includes DC and AC principles and their various uses in the automobile. The relationship between Ohm&,#146,s Law and actual automotive circuits is demonstrated.

Suspension and Alignment

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of suspension and steering systems, including non-adjustable and adjustable wheel alignment angles and application of balancing and alignment equipment.

Manual Transmission and Axle

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is an advanced study of manual transmissions and transaxles, including proper overhaul procedures for axles and manual transmissions and transaxles.

Braking Systems

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers hydro-boost power brakes and vacuum power brakes as well as master cylinders and caliper rebuilding. Topics covered also include fundamentals of hydraulics, brake components and ABS, the relation to traction control, and vehicle stability.

Advanced Engine Repair

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course includes an advanced application of engine fundamentals, including engine removal, internal diagnostic and repair procedures, engine assembly and installation procedures.

Engine Reconditioning

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a review of engine fundamentals and overhaul procedures followed by performance in all areas of engine block preparation, cylinder head preparation, cleaning, specifications, measurements with micrometers, assembly, and operation of unit.

Heating, Cooling, and Air Conditioning Systems

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is an introduction to engine heating and cooling systems used in modern vehicles. Other topics include the automotive air conditioning system.

Certificate II in Automotive Air Conditioning Technology

Course Format: Classroom
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia

This course is for an apprentice or qualified automotive technician to gain Certificate II in Automotive Air Conditioning Technology, so they are able to apply for an Automotive Refrigeration Handling License.

Automotive Engines

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States

In-depth study of design, operation, troubleshooting, and service procedures for modern gasoline and diesel engines. Procedure for disassembly and reassembly of engine units, service, and technical data are presented. Typically Offered Fall, Spring

Automotive HVAC

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States
  V

In-depth study of automotive, heating, ventilation, and air conditioning systems. The course includes theory of operation, diagnosis, and repair of HVAC systems. Environmental safety issues are stressed including law and regulations, CFC recovery and recycling, ozone depletion, and new, environmentally safe systems. Computerized automatic temperature controlled systems are also covered.

Automotive Service Technology

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States
  V


This program features instruction in modern facilities with an emphasis on automotive diagnosis, inspection, adjustments and service. In addition, students are taught to test, diagnose, service and replace electronic controls, fuel injection components and accessories, air conditioning units, power windows and seats, lighting circuits, and safety and warning devices.

Students complete more than 550 hours of repair and adjustment on vehicles under the supervision of automotive service faculty. Students who wish to continue their education may pursue a bachelor&,#146,s degree in Automotive Management, Automotive Engineering Technology or nearly 20 other degree programs.

Career Opportunities

The importance of competent automobile repair in today&,#146,s mobile society cannot be overstated. Because vehicles have skyrocketed in cost and are kept in service longer, there is a shortage of trained, knowledgeable technicians.

Skilled technicians are needed to perform preventive maintenance, repairs and adjustments. Challenges in this field include servicing electrical systems, brakes, wheel alignments, fuel injection sys... [Read More]

Automotive Management

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States
  V

The Automotive Management (AMGT) program, formerly Automotive &, Heavy Equipment Management (AHM), is a baccalaureate degree program that focuses on providing the transportation industry with state-of-the-art technical and business managers for service, parts, sales, leasing, warranty, and customer relations positions. Opportunities exist with car, truck, equipment, and component manufacturers, suppliers, dealers, fleets, insurance companies, the aftermarket, and local and federal government agencies.

The AMGT program prepares graduates for careers in the service sector. Regardless of where a product is designed or manufactured, graduates are prepared to provide knowledgeable, skilled, world-class customer service. One in seven jobs in the United States is related to transportation, primarily in the service sector, and these jobs cannot be outsourced. The AMGT program emphasizes developing verbal and written communication as well as organizational and time management skills. On-the-job management internships further prepare the graduate to enter this lucrative field with experience.

The AMGT program has two baccalaureate options:

The... [Read More]

Auto Electricity - Electronics

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States

Provides electrical fundamentals and practical lab activities. Includes electricity, Ohm\&,#146,s Law, magnetism, inductance, capacitance, basic electronic devices, schematic user\&,#146,s information, test procedures, test equipment, and batteries.

Automotive Engineering Technology

Course Format: Classroom
School/Trainer: Ferris State University
Training Center(s)/Venue(s): Big Rapids, United States
  V


The AET program is a four year degree program that concentrates on engineering skills required by the automotive industry. Students receive hands-on laboratory experience in engineering processes, mechanical testing, metallurgy, emission and dynamometer testing. In addition, an on-the-job engineering internship is an important part of the program.

AET is an instructional program that prepares individuals to apply basic engineering principles and technical skills in support of engineers and other professionals engaged in developing, manufacturing and testing self-propelled ground vehicles and their systems. Includes instruction in vehicular systems technology, design and development testing, instrument calibration, test equipment operation and maintenance, and report preparation.

Career Opportunities

Graduates from the AET program are among the highest-paid and most sought-after graduates of Ferris. Because every global automotive manufacturer doing business in America requires engineering development with the precise skills offered by this program, many graduates are faced with the difficult decision of choosing from several highly... [Read More]

Public Relations for the Automotive Industry (Diploma)

Course Format: Online
School/Trainer: Event Management Training
Training Center(s)/Venue(s): London, United Kingdom
  V

Public Relations has revolutionised the way business communicates in the global marketplace .To Compete, Grow and be Successful in business worldwide Public Relations, Advertising and Marketing Skillsets are Key. The potential for organisations with a Comprehensive Public Relations, Advertising and Marketing strategy is immense. The Practical Online Diploma Course in Public Relations for the Automotive Sector features Real Life Briefs, Case Studies and Practical Assignments which focus specifically on the Public Relations Area.

Additional modules on Online Public Relations and Event Management are included in this Fast Paced Practical Course. The Transferable Skills gained on this Course can be used Worldwide. The Course is Industry Certified and is Recognised in 140 Countries Around the World. It is the Course to advance your Career in this Exciting and Essential Area.

Pages: 1 2 3 4 5 6 ...


Find Automotive training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Try the search form on top of each page to find the latest course information, using course topic and location as keywords. Keep the course topic keyword short to get more results.



- Other Topics -
- Online/E-learning -
Automotive
Ask for Training
Add Courses