Construction Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Construction Technology




Total 800 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Popular courses:
Construction Management
Construction Project Management
Construction Safety
CONSTRUCTION TECHNOLOGY
Construction Estimating
CONSTRUCTION


Commercial Green Building - Construction Administration

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

Construction and demolition debris is the waste stream generated by new construction, by renovation, and by the demolition of existing buildings.
Building construction and renovation activities alter the urban environment, generating noise, waste, and air pollution that can stress the building&,#146,s occupants and neighbors.
High performance construction practices can help reduce adverse effects during construction while improving the building&,#146,s long-term environmental performance. In particular, construction and demolition (C&,D) waste has become an increasing environmental and municipal burden, equaling up to 30% of the municipal solid waste stream.
The majority of this waste is generally disposed of by private haulers engaged by demolition subcontractors and landfilled in or out of state, at increasing cost to taxpayers. The strategies that follow can reduce the amount of C&,D waste generated at the start, and encourage better waste management methods through salvage and recycling.

Green Building Infrastructure - Construction Practices

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This module discusses how to develop, implement, and enforce a site protection plan to minimize impact of construction activity in and adjacent to the right-of-way.

After completing this course the participant will understand:
- Site Protection
- Plan development
- Protecting water sources and planted areas
- Developing waste management and recycling plans
- Minimizing construction and equipment impacts

Stormwater Discharges and Permits in Construction

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This course covers federal and state regulations to control and prevent stormwater discharge. Stormwater discharges are generated by runoff from land and impervious areas such as paved streets, parking lots, and building rooftops during rainfall and snow events that often contain pollutants in quantities that could adversely affect water quality. Federal and state storm water regulations require industrial facilities to take steps to prevent storm water pollution. All stormwater permits require the development and implementation of minimum control measures (for MS4 stormwater permits) and best management practices (for industrial stormwater permits). Consequently, this course also discusses procedures required for NPDES permit and pollution prevention plans.

At the conclusion of this course, you will be able to:
- Describe the EPA construction general permit requirements
- Identify sources of stormwater discharge from industrial facilities
- Describe the EPA multi-sector general permit (MSGP)
- Discuss the impact of Municipal Separate Storm Sewer System (MS4) permits on municipalities and industrial facilities
- Describe the phases of a... [Read More]

CDOT - Stormwater Management During Construction (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

Stormwater Management During Construction is a certification course for the Colorado Department of Transportation (CDOT) Erosion Control Supervisor (ECS). This program has been developed for the Erosion Control Supervisor responsible for proper installation, maintenance and inspection of Best Managment Practices (BMPs for the control of erosion and sedimentation at construction sites. The program covers:

Colorado Stormwater requirements and permitting

Erosion and Sedimmentation at construction site

Types of Best Management Practices for specific situations to control erosion and sedimentation

Installation requirements for construction site

Inspecting and maintaining construction sites

Learning Objectives:Describe the process of erosion and sedimentation

Describe the installation requirements for BMPs for erosion and sediment control

Describe BMPs to control sources of pollution on construction sites

List the duties of the Erosion Control Supervisor

Cranes and Rigging (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This course is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/or conveyors. Topics include cranes and derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts.

TOPICS COVERED:

Definition of Competent Person

Operators

┬ĚHazards Associated with Crane Operations

Accidents

Types of Cranes

Load

Guarding

Sheaves

Inspection

Confined Space Entry Safety (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This mobile compatible course is intended for all employees who may be required to enter into confined or enclosed work spaces to perform work. This course deals with the safety issues concerned with entering permit-required confined spaces. This course will instruct students about the hazards that may occur during the work in confined spaces.

OSHA is striving to provide safety to the workers in all required disciplines by providing courses such as this one, which helps workers to learn about industry hazards, especially in confined spaces.

Course Outline

Describe confined spaces as defined in the module.



Identify the characteristics of confined spaces.



Discuss atmospheric conditions found in confined spaces.



Summarize a prevention program.



Name the duties of employers and employees.



Illustrate rescue and emergency services.



Apply testing protocol.

Concrete and Masonry Safety (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This course is designed for construction workers who want to learn about safely working with concrete and masonry projects. The information addresses the requirements necessary to protect all construction employees from the hazards associated with concrete and masonry construction operations performed in workplaces covered under OSHA 29 CFR Part 1926.7. In addition to the requirements in Subpart Q, other relevant provisions in Parts 1910 and 1926 apply to concrete and masonry construction operations. Topics include general requirements for formwork and masonry construction.

This course is designed for construction workers who want to learn about safely working with concrete and masonry projects. The information addresses the requirements necessary to protect all construction employees from the hazards associated with concrete and masonry construction operations performed in workplaces covered under OSHA 29 CFR Part 1926.7. In addition to the requirements in Subpart Q, other relevant provisions in Parts 1910 and 1926 apply to concrete and masonry construction operations. Topics include general requirements for formwork and masonry construction.

Concrete and Masonry Construction (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This mobile compatible course is designed for construction workers who want to learn about safely working with concrete and masonry. The information addresses the requirements necessary to protect all construction employees from the hazards associated with concrete and masonry construction operations performed in workplaces covered under OSHA 29 CFR Part 1926.7. In addition to the requirements in Subpart Q, other relevant provisions in Parts 1910 and 1926 apply to concrete and masonry construction operations. Topics include general requirements for formwork and masonry construction.

General safety requirements for formwork and masonry construction

Requirments of Subpart Q, 29 CFR 1926

Relevant provisions of 29CFR1910

Bloodborne Pathogen Safety in the Workplace (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This mobile compatible course is designed to provide a basic understanding of bloodborne pathogens, common modes of their transmission, methods of prevention, and other pertinent information such as what requirements of the OSHA standard should be met in the handling and proper disposal of such materials.

Employers are to implement written Exposure Control Programs to address what duties employees are to perform on a daily basis to keep their work areas and their persons safe.

Course Outline

Summarize what is meant by bloodborne pathogens.

Identify the types of diseases that can be transmitted through the bloodborne pathogens.

Name the symptoms of bloodborne diseases.

Explain how bloodborne pathogens may be transmitted in the workplace.

Discuss prevention measures and what to do if exposed to bloodborne pathogens.

Basic Workplace Safety Orientation (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

This mobile compatible course gives employees an overview of some basic workplace hazards and how employees can protect themselves from them.
Employees may be exposed to many safety and health hazards while on the job. These include chemical hazards, fire hazards, electrical hazards, confined space hazards, and many other important workplace safety topics.

Course Outline

Identify and take basic preventive measures against chemical hazards.
Examine proper respiratory and personal protective equipment (PPE).
Assess preventative measures protecting against workers falling from elevated work places.
Illustrate the procedures involved in locking/tagging out equipment.
Recommend protective measures for preventing confined space hazards.
Discuss fire hazard prevention.
Demonstrate basic first aid procedures.
Relate how to protect oneself from the threat of bloodborne pathogens.
Describe how to protect oneself from heat and cold stresses.

10 Hour Construction Safety Orientation (Certificate)

Course Format: Online
School/Trainer: Online Institute of America
Training Center(s)/Venue(s): Lakeway, United States
  V

The 10 Hour Construction Safety Certification Training Program is intended to provide an entry level construction worker&,#146,s general awareness on recognizing and preventing hazards on a construction site. OSHA recommends Safety Certification Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. .

Evaluate how employers and employees should behave in common workplace scenarios based on OSHA standards, with 70% accuracy.



Apply information about OSHA, inspection procedures, written hazard communication, the OSH Act, and OSHA standards to respond to real-world scenarios, with 70% accuracy.

Brick Masonry

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is an introduction to masonry tools and equipment, masonry drawings, specifications and calculations, and handling mortar and bricks/blocks.

Masonry Construction

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of masonry units and installation techniques, methods, and procedures in masonry installations.

Building Construction for Fire Protection

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is a study of the components of building construction that relate to fire and life safety, focusing on firefighter safety. The essential elements of construction and design of structures are shown when inspecting buildings, preplanning fire operations, and operating at emergencies.

Construction Planning & Scheduling

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers the decision-making process involved in organizing the labor, materials, and equipment for a construction project.

Computerized Construction Estimating

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers the application of computerized construction estimating procedures. Timberline estimating software is used.

Construction Estimating

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers the basic methods of estimating residential, commercial and industrial projects and the units of measure used for different building construction materials and processes.

Construction Surveying

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course is an introduction to surveying as used in the construction industry, building and site layout, establishing elevations, and setting batter boards, as well as other related topics.

Construction Project Management

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This is a course designed with projects using building construction skills. Students will learn techniques of scheduling materials and labor to be on the jobsite at appropriate times to meet project goals and to ensure that permits, restrictions, and surveys have been met.

Fundamentals of Construction Safety

Course Format: Classroom
School/Trainer: Greenville Technical College
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States

This course covers safety standards and practices as they apply to the building construction industry.

Pages: 1 2 3 4 5 6 ...


Find Construction training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Facts:
This website holds more than 300,000 training course records worldwide, with hundreds of new postings daily. All services in this website are free!



- Other Topics -
- Online/E-learning -
Construction
Ask for Training
Add Courses