Fiber Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Fiber Optics




Total 205 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Popular courses:
Fiber Optics
IBM Fiber Channel Storage for System x
FIBER OPTICS TECHNOLOGY
Fibers
Optical Fiber Communications
Advanced Fiber Connector Installation


NIOSH 582 - Sampling & Evaluating Airborne Asbestos Fibers (Certificate)

Course Format: Classroom
School/Trainer: GTC Economic Development and Corporate Training
Training Center(s)/Venue(s): Greenville, Simpsonville, Taylors, United States
  V

Federal and state regulations require specific training for personnel involved in asbestos management. This 5-day NIOSH 582 Equivalent course covers the OSHA training and SC-DHEC licensing requirements for asbestos air monitors. Students will learn NIOSH-approved methods of collecting and evaluating airborne asbestos samples in occupational settings. The course includes statistics and sampling-related mathematics, calibration of air sampling equipment, and set-up and use of the phase contrast microscope. It is helpful if students have a good background in basic algebra and the ability to use a calculator with square and square-root functions. Hands-on exercises complement the practical instruction on asbestos air sample analysis. Upon successful completion of the course, participants receive a certificate that may be used for licensing purposes.

This course may be used licensing as an asbestos abatement professional in SC and NC and other states with reciprocity agreements.

You must bring your own Phase Contrast Microscope set up for asbestos analysis or rent a scope for the class. Your microscope must have a Walton Beckett G-22 graticle and your s... [Read More]

Fiber Optics

Course Format: Classroom
School/Trainer: IEC Chesapeake
Training Center(s)/Venue(s): Dulles, Laurel, United States

This 20 Hour course introduces the types of equipment &, methods used in fiber optic cable installations Course Outline: Introduction to fiber optic theory &, components, Light transmission, receivers, connectors, couplers &, splices, Fiber optic splicing &, testing

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge USA IBM Training Centers
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge Canada IBM Training Centres
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge UK IBM Training Centres
Training Center(s)/Venue(s): Aberdeen, Bath, Bristol, Leeds, London, Wokingham, United Kingdom
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge UAE IBM Training Center
Training Center(s)/Venue(s): Abu Dhabi, Dubai, United Arab Emirates
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge India IBM Training Center
Training Center(s)/Venue(s): Bangalore, Chennai, Delhi, Pune, India
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge Malaysia IBM Training Center
Training Center(s)/Venue(s): Petaling Jaya, Malaysia
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge Indonesia IBM Training Center
Training Center(s)/Venue(s): Jakarta, Indonesia
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge China IBM Training Center
Training Center(s)/Venue(s): Guangzhou, China
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

IBM Fiber Channel Storage for System x

Course Format: Classroom
School/Trainer: Global Knowledge Singapore IBM Training Center
Training Center(s)/Venue(s): Singapore, Singapore
  V

Upon completion of this hands-on simulator class you should be able to plan, install, configure, manage, and perform problem isolation on the IBM System Storage DS3000 and DS4000 family of products.

The Storage Solutions two day class starts with connectivity and protocols used to connect storage to servers. Beginning with the DS3000 family, emphasis is on the cabling configuration and architectures of these storage units along with the performance differences between the SATA, SAS, and fiber channel devices, followed by the DS4000 family and expansion units EXP420, EXP810, and EXP5000. Managing the DS4000 controller, starting with the power on sequence and the value of DACstore is discussed plus the installation of the IBM DS Storage Manager user management interface. Arrays and logical drives are covered along with the dynamic operations. How to partition logical drives and the use of FlashCopy and VolumeCopy will also be covered. Managing DS3000 controllers starts with the Storage Manager interface, some configuration parameters that are specific to the DS3300, how to create arrays and logical drives and last you will look at the codes associated with the DS... [Read More]

Optical Fibre Open Registration Endorsement (Certificate)

Course Format: Classroom
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia
  V

This course provides training for the Telecommunications industry where subcontract installers are required to install, terminate and maintain optical fibre/cables and products within the customer premises. This is a voluntary endorsement to add to open registration for Optical Fibre installations

The course primarily focuses on the installation practices and testing of optical fibre in customer premises. The course consists of:
Optical fibre principles and characteristics
Optical fibre/cable characteristics and specifications
Optical fibre devices (lasers, LEDs and detectors)
Occupational Health and Safety issues
Optical fibre cable terminations
Optical fibre splicing

Optical Fibre Splicing - Telstra Approved

Course Format: Classroom
School/Trainer: Federation Training
Training Center(s)/Venue(s): Bairnsdale, Chadstone, Forestec, Lakes Entrance, Leongatha, Melbourne, Morwell, Sale, Yallourn, Australia
  V

This course provides training for the Telecommunications Carrier industry where subcontract installers are required to install, terminate and maintain singlemode optical fibre/cables and products within the Telstra network. This training course also meets the training requirements for all other carrier providers i.e. Optus, Alcatel, Primus etc.

The course primarily focuses on the installation practices and testing of Singlemode Telecom Outside Plant products i.e. cables, closures, racks/subracks, wall mounts etc. The course consists of:
Optical fibre principles and characteristics
Optical fibre/cable characteristics and specifications
Optical fibre devices (lasers, LEDs and detectors)
Occupational Health and Safety issues
Optical fibre cable terminations
Rack/subracks, closures, wall mounts
Optical fibre fusion splicing
Testing and commissioning of optical fibre links
Labelling and formatting of test results
Fault finding techniques and devices

Fiber Optics

Course Format: Classroom
School/Trainer: GigaWave Technologies
Training Center(s)/Venue(s): San Antonio, United States
  V

This four-day class has been developed with 16 hours of classroom lecture and 16 hours of hands-on skills labs to provide practical understanding and skills required to properly design, install, and maintain fiber optic networks in Telco, Broadband, and Premises (LAN) applications. This course is also available in a two-day version with 16 hours of classroom lecture.

Students will use the latest fiber optic technology and equipment to learn how to connectorize, splice, test, and troubleshoot optical fiber networks in order to increase efficiency, reliability, and on-the-job safety as well as reduce cost and downtime.

The course is intended for those who design, install, test, and maintain fiber optic communication systems for voice, video, and data applications.

Fiber Master Journeyman (Certificate)

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

Fiber Master Journeyman is the highest level of training offered through FNT. This three day course is designed with the most current and advanced techniques available and focuses primarily on troubleshooting. You will also spend time learning to locate breaks and how to perform emergency fiber restoration and repairs. Fiber Master goes in-depth regarding single-mode long distance networks, mid-span access (FTTX), OTDR operation, LAN/WAN network structures and has several labs designed to significantly improve student&,#146,s time and accuracy restoring fiber based systems. Upon successful completion of this course, students will be able to face any fiber situation they encounter with confidence and resolve the problem quickly and efficiently. You must complete all prerequisites before you will be eligible to attend Fiber Master Journeyman.

Fiber Optic Inspector (Certificate)

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

This course is designed for Quality Control Inspectors, Project Managers, Field Supervisors, Consultants and Owner Representatives who must review and approved contractors or subcontractors installation and testing practices. It covers all aspects of basic fiber applications from receipt inspection and cable pull inspection to various forms of termination inspection criteria. With an emphasis on WAN, ITS, security and power generation systems, this class is ideal for METRO communications, utilities workers and Traffic Management personnel. Upon Successful completion of this course, the candidate will be able to complete basic inspections and the associated documentation. This course also prepares the individual for Inspector Level II which presents more advanced applications and practices within the industry.

I.Fiber Optic Theory, Standards and Applications Review •Course Objectives
•Introduction
•The History of Fiber Optics
•Why Fiber Optics are so Popular
•Fiber Optic Theory and the Properties of Light
•Fiber Optic Light Sources and Their Wavelengths
•The Electromagnetic Spectrum
•Refraction and Reflection

Read More]

Certified Test Technician

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

Duration - 2 days, 16 hours
Certification - FNT

I.Introduction to Cable Testing A.Need to Communicate
B.Safety Issues
C.Performance Issues
D.Test/Verification/Certification

II.Codes and Standards A.Standards Bodies &, Regulatory Agencies
B.Order of Authority
C.Types of Standards

III.Transmission Applications A.Premise VS Public
B.LANs/WANs
C.CANs/MANs
D.Common Topologies
E.Encoding Methods

IV.Transmission Media and Connectors A.Media
B.Reading Cable Jackets
C.Categories of Copper Cabling
D.Coax Cable
E.Fiber Optic Cable
F.Connector Styles
G.Connection Methods

V.Defining Test Parameters A.Units of Measure
B.Electrical Units
C.Copper Cable Test Parameters

VI.Wire Mapping A.Identifying Wire Map Errors

VII.Electrical Parameters A.Dielectric Constant
B.Attenuation
C.Propagation Delay
D.Impedance and Delay Skew
E.DC Loop Resistance
F.Return Loss and ACR
G.FEXT, ELFEXT, Connector Path FEXT
H.PSNEXT, PSELFEXT, PSACR

VIII.Testing Solution... [Read More]

Advanced Fiber Optic Technician (Certificate)

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

This course is designed for technicians who already possess the basic connector installation skills and theory of fiber optics. It is primarily a hands-on course with small lecture and demonstration sessions conducted throughout the three days to help you better understand the assignments that will be given, both as homework and in-class tasks. Upon successful completion of this class, you will be well prepared for work in any field utilizing advanced fiber optic technologies. You will also be ready for the highly advanced Fiber Master Journeyman Class.

This Course Covers:

Lecture:
Component and Equipment Identification
OTDR (optical time domain reflectometer) testing
Basic understanding of OTDR

Lab:
Communication System and Design
Advanced System Installation and Maintenance
Cable Management Methods
Building Cable Installation
End Prep Installation Methods
Fanout and Breakout Kit Installation
Cable Management Methods
Fusion Splicing introducing new technologies
Mechanical Splicing
OTDR Operations
Splice Case Installation
Network Construction
&... [Read More]

Fiber Optic Elements

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

Fiber Optic Elements is FNT&,#146,s newest 3 day comprehensive course. In this class you will learn the basics of connectorization, including LC installation, mechanical splicing, OSP and premise fusion splicing, optical loss testing, OTDR operations, FTTH and FTTX installations, and fanout kit installation. You will also learn the new industry standard requirements for gigabit and security video applications. Learn how to avoid costly pre-polished connector failure with a few simple techniques. FNT has loaded this course with the advanced elements that keep you, &,quot,the professional technician&,quot, on track and a cut above the rest. Don&,#146,t forget to sign-up to take the ETA-FOI exam on the final day of training to earn two certifications in only three days. Project Managers, Project Leads and others aspiring for more, this course was developed for you!

Fiber Optic Installer

Course Format: On-site
School/Trainer: FNT Fiber Network Training and Consulting Services
Training Center(s)/Venue(s): Phoenix, United States
  V

Fiber Optic Installer combines fiber optic theory and design with basic connector installation practices. Upon completion, the student will be knowledgeable in the theory and applications of fiber installations as well as proficient in basic safety and connector installation practices. This course is a pre-requisite to Advanced Technician Certification.

Pages: 1 2 3 4 5 6 ...


Find Fiber training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.



- Other Topics -
- Online/E-learning -
Fiber
Ask for Training
Add Courses