HVAC Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Heating, Ventilation and Air Conditioning




Total 487 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Heating Ventilation & Air Conditioning (HVAC)

Course Format: Classroom
School/Trainer: Florida Career College - Margate
Training Center(s)/Venue(s): Margate, United States
  V

The objective of this program is to prepare students at an entry level for employment in the air conditioning and refrigeration field. The HVAC Schools program preparation includes installing and maintaining residential equipment, light commercial equipment, boilers, testing and balancing systems and geothermal heat pumps. Students are prepared for field service that includes installation technicians, shop service, repair technicians, and apprentice mechanics.

Heating Ventilation & Air Conditioning (HVAC) (Diploma)

Course Format: Classroom
School/Trainer: FCC Anthem - Orlando
Training Center(s)/Venue(s): Orlando, United States
  V

The constant demand of our environment to be more energy efficient has led to the increasing sophistication of heating, air-conditioning, and refrigeration systems. As a result, many employers require employees to have formal training and job certification in this field. The HVAC School Training programs at FCC are designed to provide you with the knowledge needed to maintain, diagnose, and correct systems that consist of many mechanical, electrical, and electronic components.

Under the direction and supervision of our HVAC instructors, you will be provided with the training needed to provide skilled service in the following:

Electrical controls and motors
Refrigeration systems and mechanics
Heating systems and controls
Air conditioning systems
Energy efficiency and green awareness
Service and procedures

Heating Ventilation & Air Conditioning (HVAC)

Course Format: Classroom
School/Trainer: Florida Career College - Pembroke Pines
Training Center(s)/Venue(s): Pembroke Pines, United States
  V

The objective of this program is to prepare students at an entry level for employment in the air conditioning and refrigeration field. The HVAC Schools program preparation includes installing and maintaining residential equipment, light commercial equipment, boilers, testing and balancing systems and geothermal heat pumps. Students are prepared for field service that includes installation technicians, shop service, repair technicians, and apprentice mechanics.

Engineering (Skills Set - HVAC Commissioning) (Certificate)

Course Format: Classroom
School/Trainer: Polytechnic West
Training Center(s)/Venue(s): Perth, Australia
  V

The Certificate IV in Engineering specifies the competencies required for employment as a Higher Engineering Tradesperson or a Special Class Engineering Tradesperson - Level II in mechanical, electrical/electronic or fabrication trade disciplines. The job role involves application of additional skills in the learner&,#146,s trade or cross skills from other trades. Job roles may include the design, assembly, manufacture, installation, modification, testing, fault finding, commissioning, maintenance and service of equipment and machinery, the fabrication of structures and assemblies, manufacture of sheet metal work, as well as use of relevant machinery, equipment and joining techniques. Machinery and equipment can include fluid power systems, stationary and mobile equipment, instruments, refrigeration, and the use of computer controlled machine tools.
What are the courses for further study and career opportunities?

Diploma of Engineering -Advanced Trade (MEM50105)

This qualification will allow you to undertake post trade studies in a range of specialisations to enhance you trade specialisation to move into another specialisation. The opportunit... [Read More]

HVAC/R (Certificate)

Course Format: Classroom
School/Trainer: Mapua Institute of Technology - Intramuros
Training Center(s)/Venue(s): Manila, Philippines
  V

HVAC/ R Principles and Application

Fundamentals of HVAC/R
Different Types of Airconditioning System
Fans and Air Distribution System
Pumps and Water Distribution System
HVAC/ R Electrical Control
Service Maintenance
HVAC/R Mechanical Components &, Auxuliary
Troubleshooting and Repair
Recovery, Recycling &, Retrofitting

Heat Ventilation Air Conditioning Workshop (Certificate) (Diploma) (Master Degree)

Course Format: Classroom
School/Trainer: M.A.K
Training Center(s)/Venue(s): CHENNAI, INDIA
  V

Overview of Industry and Scope of HVAC.

o Role of HVAC Engineer in various Industries.

o Basic of HVAC Design.

o Covers Moist air properties and conditioning processes.

o Indoor &, out door design conditions.

o Space air diffusion Heat transmission in building structures.

o Heating &, cooling load calculations.

o Duct design &, layouts.

o System selection.

o Piping system.

o Distribution principles and refrigeration Piping &, Systems.

o Practical guidelines for installation and commissioning of various systems.

o Inspection &, Testing of the system.

HVAC/R (Certificate)

Course Format: Classroom
School/Trainer: Carroll Community College
Training Center(s)/Venue(s): Westminster, United States
  V

HVACR technicians work in entry-level positions with large or small contracting companies,
manufacturers, or wholesalers of environmental systems equipment. They install, service, and
repair heating and air-conditioning systems in residences and commercial establishments.
Position Requirements
None
Information Unique to the Training
None
Courses to Complete
Prerequisites
None
Core Courses
VOC220 Applications in Environmental Systems I
VOC094 Applications in Environmental Systems II
Approximate Number of Hours
90 hours

Retrofit and Non-Commercial Building HVAC Design

Course Format: Classroom
School/Trainer: CSUF University Extended Education
Training Center(s)/Venue(s): Fullerton, Garden Grove, Irvine, United States
  V

Building retrofit and non-commercial buildings are also rich with the potential to achieve significant improvements in overall energy consumption. In this class, you will explore the inherent challenges in retrofitting a building with innovative HVAC design and technology. Discussions will also cover efficient HVAC design for typical residential housing as well as special facilities such as healthcare facilities.

Green HVAC

Course Format: Classroom
School/Trainer: CSUF University Extended Education
Training Center(s)/Venue(s): Fullerton, Garden Grove, Irvine, United States
  V

Based on the principle of, &,quot,The greenest energy is the energy not used,&,quot, this class aims to transform the way HVAC professionals think about their role in sustainability. Reducing the energy consumption of HVAC units significantly impacts the overall performance of a building. You will learn the fundamental principles of energy efficiency and become familiar with the regulatory framework. The class will practice basic financial analysis for sustainable design, review measurement methodologies and discuss equipment lifecycle management best practices.

HVAC System Audit

Course Format: Classroom
School/Trainer: CSUF University Extended Education
Training Center(s)/Venue(s): Fullerton, Garden Grove, Irvine, United States
  V

When 40-60% of energy usage comes from the HVAC system, it is no surprise that the HVAC system is the main focus of energy audits. You must first understand electrical and natural gas resource supplies and usages, and acquire a thorough knowledge of a wide variety of equipment (e.g. steam systems, chillers, and heat pumps). This foundation will allow you to knowledgeably discuss and analyze the efficiency of these equipments. Ventilation systems with a focus on indoor environmental quality will be explored, as will the impact of efficient control system on energy consumption.

HVAC Design

Course Format: Classroom
School/Trainer: Toronto Engineering Training Center
Training Center(s)/Venue(s): Toronto, Canada
  V

HVAC Design

This course deals with the HVAC system design. Through the classroom instruction, the students will be exposed to various aspects of HVAC system design, including system selection, calculations, system layout, drafting, specifications, and working procedures in this field. The use of computerized load calculation will also be covered.

This course will focus on practicality. The students without previous HVAC education but with an engineering background can become competent HVAC designers, provided they finish the course and practice with sample projects. The course is also of value to those who already have Canadian experience but want to broaden their knowledge base to meet future challenges.

The principal target of employment is design engineer in mechanical consulting firms. Other employment opportunities are also possible.

Those who take the HVAC design course are also encouraged to take plumbing and fire protection design course because they are all responsibilities of a well rounded mechanical designer.

Course Outline: [35 hrs.]
Fundamentals:
Fluid mechanics/Thermodynamics/Heat transferRead More]

HVAC

Course Format: Classroom
School/Trainer: Cleveland State Community College
Training Center(s)/Venue(s): Cleveland, United States

Materials, components, terminology, theory and application of heating and refrigeration systems. Design calculations, installation and servicing of commercial and residential systems. Two hours lecture and two hours lab per week

Ground Sourced HVAC

Course Format: Classroom
School/Trainer: Cleveland State Community College
Training Center(s)/Venue(s): Cleveland, United States
  V

This course addresses closed loop and open loop designs, residential usage of ground source heat pumps, trenching vs. well drilling, ground loop requirements, manual J load analysis to size the ground source system, and desuperheater add-on hot water elements. This course will also have the benefit of a ground source heat pump demonstration project where a unit has been installed in the construction technology laboratory. Two hours lecture and one hour lab per week

HVAC Systems & The Building Envelope

Course Format: Classroom
School/Trainer: University of Toronto School of Continuing Studies
Training Center(s)/Venue(s): Toronto, Canada
  V

With an emphasis on sustainable practices, this course deals with the relationship between building envelopes and environmental control. We will examine the full spectrum of heating, ventilation and air conditioning (HVAC) issues, including: thermal comfort, indoor air quality, heating, cooling, moisture regulation, air distribution, pressure regimes, energy usage, solar and internal gains, and natural and hybrid ventilation. Throughout the course, we will look at outstanding examples of responsible building practices.

This course qualifies for 30 Ontario Association of Architects (OAA) core learning hours.

Learner Outcomes
Understanding of the relationship between building envelopes and environmental control
Appreciation of the full spectrum of heating, ventilation and air-conditioning concerns
Knowledge of current best-practice HVAC models

HVAC Design & Drafting per ASHRAE & SMACNA

Course Format: On-site
School/Trainer: Institute of Piping Engineering & Building Services
Training Center(s)/Venue(s): Hyderabad, India
  V


Institute of Piping Engineerng & Building Services - IPEBS HVAC Design & Drafting per ASHRAE & SMACNA training course program is the most extensive HVAC Training program offered anywhere getting into core of the subject covering topics like fundamentals, cooling load & heat loss calculations, central heating system design, air distribution system design, chilled water system design, chilled water piping design, commercial ventilation system design, kitchen ventilation system design, VAV system design, equipment selection with live projects.







The Training Course focuses on fundamentals of HVAC & psychrometrics, Heat Gain/Heat Loss Calculations, Central Air System Design, VAV System Design, Central Heating System Design, Kitchen Ventilation System Design, Air Distribution System Design, Chilled Water System Design, Piping Design, Detailed Equipment Sizing & HVAC Systems Drafting.


Electricity for HVAC/R

Course Format: Classroom
School/Trainer: Red Rocks Community College
Training Center(s)/Venue(s): Arvada, Lakewood, United States

Teaches resistance, current, voltage and power in AC and DC circuits; measurements; computations of series and parallel circuits; circuit analysis and troubleshooting with basic test equipment.

HVAC/R (Certificate)

Course Format: Classroom
School/Trainer: Red Rocks Community College
Training Center(s)/Venue(s): Arvada, Lakewood, United States
  V

Degrees
•Air Conditioning, Heating and Refrigeration
�Refrigeration
�Air Conditioning
•Hydronic Heating
•Heating

Certificates:
•Air Conditioning
•Level I Refrigeration
�Level II Refrigeration
•Refrigeration
�HVAC Fundamentals
�HVAC Controls Technician
•Forced-Air Heating
•Hydronic Heating
•Air Conditioning, Heating/Refrigeration Apprenticeship Program

Continuing Education for Tradesmen - Mechanical (HVAC)

Course Format: Online
School/Trainer: Workforce Development - Manassas & Woodbridge
Training Center(s)/Venue(s): Manassas, Woodbridge, United States
  V

Journeymen, Master Plumbers, Electricians, HVAC mechanics, and Gas Fitters are now required by the Virginia Board of Contractors to take a pre-determined number of continuing education hours specific to their trade as part of the licensing process. Anyone obtaining or renewing a license must take continuing education in his/her respective profession. Plumbers, HVAC technicians and Electricians must take three hours of continuing education in their field. Gas fitters must take one hour. (This one hour class for Gas Fitters is intended for Journeyman and Master Gas Fitters, Liquefied Petroleum Gas Fitters, and Natural Gas Fitters.) Each course covers new definitions, code changes, general requirements, impacts on the job, general use and special equipment included in the respective codes. These classes are recognized by the Commonwealth of Virginia’s Department of Professional and Occupational Regulation and the Virginia Board for Contractors, and certificates of Continuing Education Units (CEUs) will be issued to all Virginia tradesmen upon successful completion of the class. Once you complete this online course, your instructor will send you a completion email. The inform... [Read More]

HVAC/R and Facilities Services Technology (Certificate)

Course Format: Classroom
School/Trainer: Northern Virginia Community College
Training Center(s)/Venue(s): Alexandria, Annandale, Loudoun, Manassas, Springfield, Woodbridge, United States
  V

The Heating, Ventilation, Air Conditioning, Refrigeration (HVAC-R) and Facilities Services Technology Career Studies Certificate is designed to prepare the student for entry-level positions in the air conditioning, refrigeration, and facilities maintenance industry. Students receive entry-level instruction in the principles, service, maintenance, repair, and installation of air conditioning, refrigeration, heating, plumbing, and electrical systems.

HVAC Operations and Efficiencies Workshop

Course Format: Classroom
School/Trainer: Office of Professional Development - NC State University
Training Center(s)/Venue(s): Raleigh, United States
  V

The underlying theme of this workshop is energy conservation. This workshop will present current information on improving HVAC efficiency in commercial and institutional establishments. You will receive a basic overview of commercial and institutional heating, ventilation and air-conditioning (HVAC) systems. Discussion will provide a comprehensive examination of HVAC fundamentals as well as the effective application of psychrometrics. HVAC equipment and associated air distribution systems as well as air-to-air heat recovery will be evaluated from an applications vantage point. You will be provided with the ability to identify opportunities for energy savings associated with HVAC systems.

Who Should Attend

HVAC maintenance supervisors and operators wishing to gain basic knowledge of HVAC systems and HVAC system energy cost savings opportunities.

Attend and You Will Receive

7.0 Engineering Professional Development Hours (PDHs)
A networking luncheon
A Certificate of Attendance

Attend and You Will Learn

HVAC fundamentals
- Definitions
- Heat transfer/heat generation
- Heating and cooling loads
- Indoor air quality... [Read More]

Pages: 1 2 3 4 5 6 7 8 9 10 ...


Find HVAC training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
In most cases you will get a unique submission code along with your each posting on this website. Please provide it as well as the message title if you want any assistance for editing/removal.



- Other Topics -
- Online/E-learning -
HVAC
Ask for Training
Add Courses