HVAC Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Heating, Ventilation and Air Conditioning




Total 487 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

HVAC Operation and Maintenance

Course Format: Classroom
School/Trainer: Ambay HVAC Training Center
Training Center(s)/Venue(s): Ahmedabad, India
  V

1. Basic fundamentals of Air-conditioning.
2. Basic refrigeration cycle.
3. Types of the air-conditioning system.
4. Components of air-conditioning system.
5. Line diagrams of

Window A/c
Split A/c
Package A/c
Central A/c system

6. Terminology used in air-conditioning.
7. Types of the compressors.
8. Types of the condensers.
9. Types of evaporators.
10. Types of cooling towers.
11. Types of Air Handling Units.
12. Types of controls used in air-conditioning systems.
13. Chilled water system.
14. Direct expansion system.
15. Operation :-

Operating procedures
Starting sequence
Stopping sequence
Log sheet for plant room readings
Log sheet for room temperature readings
Inspection and routine maintenance
Routine service operations
-Pumpdown of the A/c system
-Purging of the non condensable gas
-Gas charging of A/c system

16. Preventive maintenance of

Window A/c
Split A/c
Package A/c
Central A/c System

17. Maintenance schedules of air-conditioning systems.
18. Condenser descaling method.
19. Methods of control setting... [Read More]

HVAC Designing and Drafting

Course Format: Classroom
School/Trainer: Ambay HVAC Training Center
Training Center(s)/Venue(s): Ahmedabad, India
  V

1. Introduction and fundamentals of HVAC.
2. Definitions as per ASHRAE.
3. Terminology used in HVAC.
4. Modes of Heat transfer.
5. Study of Psychrometric chart.
6. Refrigeration components.
1) Compressor,2) Condenser,3) Expansion valve, 4) Evaporator.
7. Basic Refrigeration Cycle.
8. Line Diagrams and Cycle of
1) Window A/c ,2) Split A/c, 3) Packaged A/c, 4) Central A/c system.
9. Types Air Conditioning Systems.
1) All Air system ,2) All water system,3) Air water system,4) Direct Refrigeration system.
10. Building Survey.
11. Orientation of Building.
12. To Read Latitude of location of Building.
13. Calculation of U factor for Walls, Glass, Roof, Partitions.
14. Calculation of Temperature Difference of Walls, Glass, Roof, Partitions.
15. Cooling and Heat load Calculations using ASHRAE Standards.
16. Filling of E-20 Form.
17. Calculation of Sensible Heat factor, ADP and Dehumidified CFM.
18. Duct designing : -
Ducted Air Velocities, Friction losses, Duct sizing methods (Equal friction method, Velocity reduction method, Static regain method), Aspect ratio,Duct sizing by use of Ductulator and Du... [Read More]

HVAC Design Workshop

Course Format: Classroom
School/Trainer: IIETS
Training Center(s)/Venue(s): Coimbatore, India

PLANNING, DESIGN,INSTALLATION, TESTING AND COMMISSIONING OF HVAC SYSTEM & COMPONENTS.

Suits best For Degree/ Diploma Engineers

HVAC Technician (Certificate)

Course Format: Online
School/Trainer: Rutgers Center for Continuing Professional Development
Training Center(s)/Venue(s): New Brunswick, United States
  V

This program is applicable to a new student of the HVACR industry or an existing worker in the industry. You will begin your studies of HVACR by learning the foundational concepts that support the installation, operation, design and analysis of heating and cooling systems.

From that foundation you will move on through more in depth sections covering all of the common residential/light commercial HVAC systems.

This program is designed for learners using an online, mentor facilitated, self-paced environment that are interested in:
•Entry-level into the HVACR industry.
•Continuing education for upgrading skills.
•Becoming Certified or Licensed (NATE, etc).

HVAC Engineering Workshop

Course Format: Classroom
School/Trainer: IIETS
Training Center(s)/Venue(s): Coimbatore, India

Excellent Training Programs in
HVAC Engineers
Quality Control Engineers
Planning Engineers
#78, Mettupalayam Road, Periyanaickenpalayam, Coimbatore, Tamil Nadu 641020
Edit
Contact Info
Phone 0422 655 5560
Email info@iiets.com

HVAC Continuing Ed

Course Format: Classroom
School/Trainer: TCC Regional Workforce Development Center
Training Center(s)/Venue(s): Suffolk, United States

HVAC license renewal requires a 3 hour continuing education course. The class below fullfills that requirement. The course covers new definitions, code changes, general requirements, impacts on the job, equipment use, and special equipment use in special codes.

HVAC/R (Certificate)

Course Format: Classroom
School/Trainer: West Virginia University at Parkersburg
Training Center(s)/Venue(s): Parkersburg, United States
  V

The HVAC/R is a degree certificate program designed to meet the standards and
skill training necessary to be licensed Heating, Ventilation, Air Conditioning and
Refrigeration technician in West Virginia. The program may be completed as a
stand-alone certificate program or may be imbedded in the Engineering
Technology - Specialized option, the Board of Governor’s Associate of Applied
Science degree program or the AAS of Technical Studies at WVU Parkersburg.
The content in the HVAC/R program is modularized for increased flexibility and
access.

Air System Layout and Design

Course Format: Classroom
School/Trainer: Washtenaw Community College
Training Center(s)/Venue(s): Ann Arbor, United States

This course provides an overview of duct systems, air flow, design and analysis of indoor air quality issues. This includes components of air distribution systems, fan principles and sizing, noise troubleshooting and system pressure losses.

HVAC Sheet Metal Fabrication

Course Format: Classroom
School/Trainer: Washtenaw Community College
Training Center(s)/Venue(s): Ann Arbor, United States
  V

This course offers an introduction to layout, design and fabrication of sheet metal with an emphasis on residential HVAC applications. Topics will include safety, sheet metal tools and equipment, fabricating HVAC duct using patterns and drawings, and installation techniques, standards and good practices.

Heating, Ventilation, Air Conditioning and Refrigeration

Course Format: Classroom
School/Trainer: Washtenaw Community College
Training Center(s)/Venue(s): Ann Arbor, United States
  V

This program is a capstone to both the Heating, Ventilation, Air Conditioning and Refrigeration - Industrial Trade and the Heating, Ventilation, Air Conditioning and Refrigeration - Commercial Trade Advanced Certificates. It provides a rigorous heating, ventilation, air-conditioning and refrigeration (HVACR) background with solid preparation for entry-level management positions or transfer to four-year programs offering bachelor degrees in HVACR, technology management, and other technically oriented fields. This program also provides opportunities to obtain advanced certifications which are recognized throughout the heating, ventilation and air-conditioning industry.

Sustainable Technologies in HVAC/R

Course Format: Classroom
School/Trainer: Washtenaw Community College
Training Center(s)/Venue(s): Ann Arbor, United States
  V

The Sustainable Technologies in HVACR program is designed for journeyman level HVACR technicians who are ready to complete their associate’s degree. This program covers advanced electrical and Direct Digital Controls and covers current and emerging green technologies. The program also focuses on the customer experience, including managing customer relationships and written communications. This program prepares students to take the Green Energy Awareness certification test sponsored by the Green Mechanical Council.

Complete an apprenticeship program concentration in HVAC. Upon completion of this, students should apply for non-traditional credit evaluation of their apprenticeship experiences to meet the apprentice program concentration requirement (26 credits).

HVAC/R (Certificate)

Course Format: Classroom
School/Trainer: TESST College of Technology
Training Center(s)/Venue(s): Baltimore, Beltsville, Towson, United States
  V

While refrigeration systems make it possible to store and transport food, medicine, and other perishables, heating and air conditioning systems control the air temperature, humidity, and air quality in the home and workplace. Refrigeration, heating, and air conditioning technicians install, maintain, and repair such systems.

Employment is projected to grow much faster than average for refrigeration, heating, and air conditioning (RHAC) service technicians, according to the U.S. Department of Labor. Job prospects are expected to be excellent, particularly for those with training from an accredited technical school or with formal apprenticeship training.* You can get the vocational education and training you need at TESST College of Technology.

Program Objectives

The objective of the Heating, Ventilation, and Air Conditioning/Refrigeration Certificate program is to train students in the troubleshooting, repair, and safety skills needed for entry-level positions in the RHAC industry. Our curriculum includes discussions, lectures, and extensive hands-on lab experience with actual RHAC equipment. The program also offers students the ability to work with... [Read More]

HVAC

Course Format: Classroom
School/Trainer: St. Philips College
Training Center(s)/Venue(s): San Antonio, United States

Introduction to heating, ventilation, and air conditioning theory, testing, and repair. Emphasis on refrigerant reclamation, safety procedures, specialized tools, and repairs.

HVAC and HVAC/R

Course Format: Classroom
School/Trainer: Northeast Technical Institute
Training Center(s)/Venue(s): Bangor, Scarborough, United States
  V

HVAC/R refers to the process of climate control in both residential and commercial buildings, as well as refrigeration requiring the control of humidity and temperature.

The HVAC/R Technician training school at NTI in Maine (ME) provides technicians with the theory and knowledge required for installation, maintenance and repair of residential and light commercial systems.

Heating, Ventilation, Air Conditioning, and Refrigeration

Course Format: Classroom
School/Trainer: Kaplan College Brownsville Campus
Training Center(s)/Venue(s): Brownsville, United States
  V

Employment of HVAC/R technicians is expected to increase much faster than average for all occupations through the year 2020 due, in part, to an increased demand for new buildings equipped with climate control systems for residential, commercial, and industrial use.* The goal of Kaplan College’s Heating, Ventilation, Air Conditioning, and Refrigeration Diploma program is to provide you with knowledge of the troubleshooting, repair, and safety skills required for the HVAC/R industry. Through group discussions, lectures, and hands-on laboratory experience with actual HVAC/R equipment, our program in Brownsville, TX can help you train for success.

Career-Focused Curriculum
In the HVAC/R field, professionals typically perform duties such as installing, maintaining, and repairing heating, air conditioning, and refrigeration systems. Safety is essential in this career field, so emphasis is placed on installing, troubleshooting, and repairing equipment in accordance with industry safety standards. Your classes will combine classroom instruction and extensive hands-on lab training in topics such as:

Basic electricity for the HVAC technician, with an overview of m... [Read More]

Heating, Ventilation, Air Conditioning, and Refrigeration (HVAC/R) (Diploma)

Course Format: Classroom
School/Trainer: Kaplan College Dayton Campus
Training Center(s)/Venue(s): Dayton, United States
  V

Employment of HVAC/R technicians is expected to increase much faster than average for all occupations through the year 2020 due, in part, to an increased demand for new buildings equipped with climate control systems for residential, commercial, and industrial use.* The goal of Kaplan College’s Heating, Ventilation, Air Conditioning, and Refrigeration Diploma program is to provide you with knowledge of the troubleshooting, repair, and safety skills required for the HVAC/R industry. Through group discussions, lectures, and hands-on laboratory experience with actual HVAC/R equipment, our program in Dayton, OH can help you train for success.

Career-Focused Curriculum
In the HVAC/R field, professionals typically perform duties such as installing, maintaining, and repairing heating, air conditioning, and refrigeration systems. Safety is essential in this career field, so emphasis is placed on installing, troubleshooting, and repairing equipment in accordance with industry safety standards. Your classes will combine classroom instruction and extensive hands-on lab training in topics such as:

Basic electricity for the HVAC technician, with an overview of major ... [Read More]

Heating & Cooling Technology (Diploma)

Course Format: Classroom
School/Trainer: Mitchell Technical Institute
Training Center(s)/Venue(s): Mitchell, United States
  V

The Heating and Cooling Technology program provides students with skills and knowledge in mechanics, electricity and sheet metal. Students also receive extensive training in energy management and environmental controls technology. Laboratory time is spent installing and servicing heating and cooling systems, as well as designing and forming sheet metal patterns for ductwork.

Heating, Air Conditioning & Refrigeration Technology

Course Format: Classroom
School/Trainer: Mississippi Gulf Coast Community College
Training Center(s)/Venue(s): Gulfport, United States

HVAC/R

Industrial Maintenance & HVAC Technology

Course Format: Classroom
School/Trainer: Kirkwood Community College
Training Center(s)/Venue(s): Cedar Rapids, United States
  V

The first year of the Industrial Maintenance & HVAC Technology program provides extensive coverage of electricity and electro-mechanical devices such as motors, relays and transformers. Additional subjects include electrical wiring, basic electronics, motor controls, refrigeration, air conditioning, computer applications and industrial hydraulics.

Second-year students focus on commercial climate controls, advanced heating, air conditioning and refrigeration systems. Additional subjects include industrial electronic devices such as programmable logic controllers and industrial motor drives.

While in the program, students may qualify for an internship with a leading manufacturer in the Cedar Rapids area. Graduates of this program can go on to complete a four-year degree at UNI, or qualify for advanced placement in the apprenticeship program of the International Brotherhood of Electrical Workers.

HVAC Installer

Course Format: Classroom
School/Trainer: Kirkwood Community College
Training Center(s)/Venue(s): Cedar Rapids, United States
  V

The HVAC Installer program prepares students to enter the skilled trade of heating, ventilation and air conditioning installation. The program focuses primarily on residential and light commercial equipment and covers installation procedures, code requirements, electrical applications and refrigerant handling procedures. The one-year, hands-on program also includes system design and HVAC component operation.

The Plumbing-Heating-Colling Contractors Association assisted the college in developing the curriculum to meet the needs of these challenging and rewarding careers.

Pages: 1 2 3 4 5 6 7 8 9 10 11 ...


Find HVAC training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
In most cases you will get a unique submission code along with your each posting on this website. Please provide it as well as the message title if you want any assistance for editing/removal.



- Other Topics -
- Online/E-learning -
HVAC
Ask for Training
Add Courses