Heavy Equipment Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Heavy Equipment Operator




Total 373 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Heavy Equipment Technician

Course Format: Classroom
School/Trainer: Lakeland College
Training Center(s)/Venue(s): Vermilion, Canada
  V

Do precise work with your hands and problem solve as you maintain, repair and overhaul a wide variety of heavy vehicles and industrial equipment.

Being an apprentice means you learn on the job as well as during the required training periods. A heavy duty technician’s apprenticeship period is four years including a minimum of 1,500 hours of on-the-job training and eight weeks of technical training each year.

Wheeled Loader Operator

Course Format: Classroom
School/Trainer: Grande Prairie Regional College
Training Center(s)/Venue(s): Edson, Fairview, Grande Cache, Grande Prairie, Hinton, Jasper, Canada
  V

This one day course includes 4 hours of lecture and videos, 4 hours of demonstration and hands-on training followed by a proficiency demonstration, and an Operator Performance Evaluation.

Some of the topics covered in this course include:
�Fundamentals of safe wheeled loader operation
�Pre use inspections
�Safe operation of the wheeled loader and associated attachments
�Safe handling of loads
�Safe task procedures
�Workplace Health and Safety Regulations in respect to the operation of mobile equipment

Overhead Crane

Course Format: Classroom
School/Trainer: Grande Prairie Regional College
Training Center(s)/Venue(s): Edson, Fairview, Grande Cache, Grande Prairie, Hinton, Jasper, Canada

Learn and understand the safe use and operation of a powered overhead hoist, including conducting a pre-use inspection, demonstrating safe operating and rigging procedures, and the use, care, inspection and storage of equipment.

Heavy Equipment Service Technician

Course Format: Classroom
School/Trainer: Grande Prairie Regional College
Training Center(s)/Venue(s): Edson, Fairview, Grande Cache, Grande Prairie, Hinton, Jasper, Canada
  V

The Heavy Equipment Service program is the result of a unique partnership between GPRC, Caterpillar, world leader in the manufacture of heavy equipment, and Finning, Caterpillar’s largest dealership worldwide. GPRC is one of two post-secondary institutions in Canada to offer this globally recognized training, which is custom-formulated to meet Alberta Apprenticeship Examination requirements.

The Heavy Equipment Service program is a two year diploma program (80 weeks in length) located at the Fairview Campus in Fairview, Alberta. Students gain advanced technical knowledge and hands-on skills directly related to Caterpillar equipment and upon graduation are ready to work anywhere Finning has opportunities �more than 40 locations across Alberta, B.C., NWT and the Yukon. Graduates are in exceptionally high demand.

This program consists of five 16 week semesters. Each is divided into two 8 week blocks: classroom theory and lab on campus, followed by a paid work practicum at a licensed Finning location. (In the rare occurrence that a Finning placement is not available, the student will be required to arrange a practicum placement with the assistance of th... [Read More]

MHC Kenworth Truck Technology

Course Format: Classroom
School/Trainer: Oklahoma State University Institute of Technology
Training Center(s)/Venue(s): Okmulgee, United States
  V


Oklahoma State University Institute of Technology has the only MHC Kenworth program in the country featuring:
Faculty with industry specific training and experience
MHC Kenworth equipped classroom and lab with the most current equipment and technology
Paid internships that strengthen learning and pave the way for employment
Low student-to-faculty ratio
MHC Kenworth scholarships

Learn!

MHC Kenworth students maintain, diagnose, service, and repair new and used trucks that feature the latest in engineering and technological advancements using factory recommended procedures, special tools, and service information.

Earn!

With paid internships as part of the program curriculum, students can begin earning even before graduation!

Achieve!

Because MHC Kenworth has dealerships across the country, your career as a heavy-duty truck technician can take you just about anywhere you can imagine - or as close to home as you want!

CAT Dealer Prep

Course Format: Classroom
School/Trainer: Oklahoma State University Institute of Technology
Training Center(s)/Venue(s): Okmulgee, United States
  V


Oklahoma State University Institute of Technology has one of the premier CAT® Dealer Prep programs in the country featuring:
Faculty with Caterpillar specific training and experience
Caterpillar equipped classroom and lab with the most current equipment and technology
Paid internships that strengthen learning and pave the way for employment
Low student-to-faculty ratio

Learn!

Your Caterpillar career begins when a dealer selects you for the program. Spend half a semester on campus and half at your sponsoring dealership on a paid internship. Caterpillar supplies current products so you learn the latest diagnostic and service procedures. Students are trained to do it right the first time, so they are immediately productive on the job.

Earn!

The starting pay for a Caterpillar technician is excellent. Depending on the region, and the overtime available, graduates earn highly competitive salaries.

Achieve!

Work on the most advanced and powerful machines on earth, built by the world’s leading manufacturer of construction equipment, Caterpillar. You will be part of the team that hel... [Read More]

DIESEL HEAVY EQUIPMENT MASTER TECHNICIAN

Course Format: Classroom
School/Trainer: College of Southern Nevada
Training Center(s)/Venue(s): Henderson, Las Vegas, United States
  V

The Diesel/Heavy Equipment program prepares students to enter the workforce as technicians to maintain, diagnose, and repair heavy equipment. The program focuses both on over the road trucks as well as diesel powered heavy equipment, typically used in the construction industry. Students will learn diesel engine and propulsion systems, fuel management systems, related accessory components, as well as hydraulics,
welding certifications, and HVAC certifications. Allstudents will be prepared to take ASE certification exams at the completion of the appropriate course. Integral to this program is a paid internship component, allowing studentsto gain valuable work experience prior to completion
of their program, making them more employable.
STUDENT LEARNING OUTCOMES –Graduatesofthisprogramwillhave theopportunity to:
�Prepare for employment in the Diesel Technology Industry as a
Certified Technician.
�Successfully passthe followingASE/NATEF certification exams:
ASE T2, ASE T3, ASE T4, ASE T5, ASE T6, ASE T7.
�Successfully pass the AWS D1.1 mild steel horizontal welding
certification.
�Successfully passthe IMACA refrigerant han... [Read More]

Diesel Equipment Technology

Course Format: Classroom
School/Trainer: Ohio Technical College
Training Center(s)/Venue(s): Cleveland, United States
  V

Don&,#146,t settle for simple diesel engine training. Set yourself apart from the crowd with the specialized Diesel Equipment Technology program at Ohio Technical College. This diesel repair program is designed to teach you what you need to know to succeed as a diesel technology professional.

Diesel training includes:
� Electrical and electronic systems
� Diesel drivetrain systems
� Automatic diesel transmission
� Suspension and steering systems
� Brake and hydraulic systems
� Transport refrigeration, heating and air conditioning
� Industrial and heavy equipment
� Light- and medium-duty diesel
� Light generator systems

Heavy Equipment Repair

Course Format: Classroom
School/Trainer: Des Moines Area Community College
Training Center(s)/Venue(s): Ankeny, Boone, Carroll, Des Moines, Newton, United States

Instruction in the repair and service of equipment relating to the heavy equipment industry. This includes all phases normally done in a general repair shop. Instruction is given under structured lab and field conditions.

Caterpillar

Course Format: Classroom
School/Trainer: Des Moines Area Community College
Training Center(s)/Venue(s): Ankeny, Boone, Carroll, Des Moines, Newton, United States
  V

DMACC and Ziegler have teamed up to bring you BIG opportunities in the field of diesel technology.

Your Associate of Applied Science (AAS) degree from DMACC will open doors to an in-demand career in the diesel technology field and will prepare you to work as a service technician.


Ziegler, one of the largest and fastest growing Caterpillar equipment dealers in the United States, is looking for qualified and skilled individuals to join their team. They feature state-of-the-art tooling and machinery, a clean, friendly work environment, continued training and opportunities for career development. Browse our site to learn more about the unique and exciting opportunities this program has to offer.

The program is accredited by the AED Foundation.

Lorry Loader

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Ride on Roller

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Tracked Loading Shovel

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Wheeled Loading Shovel

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Reach Truck

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Telescopic Handler

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Fork Lift Side Loader

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Rough Terrain Forklift/Masted Truck

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Forward Tipping Dumper

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Excavator

Course Format: Classroom
School/Trainer: Walker Training Ltd.
Training Center(s)/Venue(s): Verney Junction, United Kingdom

Walker Training are now able to offer CPCS Tests at our Training Centre in Verney Junction, Buckinghamshire.

We also offer a 1/2 day Pre-Theory Test Training for those candidates that would like guidance on completing the theory tests before they do it for real.

Pages: 1 2 3 4 5 6 7 8 9 10 11 ...


Find Heavy Equipment training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Try the search form on top of each page to find the latest course information, using course topic and location as keywords. Keep the course topic keyword short to get more results.



- Other Topics -
- Online/E-learning -
Heavy Equipment
Ask for Training
Add Courses