Mechanic Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Mechanic




Total 800 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Mechanical Seals and Systems - Selection & Operation Workshop

Course Format: Classroom
School/Trainer: 2KG Training
Training Center(s)/Venue(s): Johannesburg, South Africa
  V

2KG Training’s Mechanical Seals and Systems course provides an introduction to sealing technology, specifically mechanical seals. The course covers terminology, different types of seals, how they should be used and some typical applications. It provides an insight into the designs and features of different seal arrangements and systems and how these can be combined to provide increased reliability for rotating equipment. There is also extensive dialogue on the causes of failure, failure analysis and failure avoidance.

The course is aimed at anyone responsible for or involved with the specification, handling, or reliability of mechanical seals and systems. In particular Maintenance Engineers and Technicians, Service Engineers, Operations Staff, Artisans, Managers, and Reliability Engineers will benefit from the course.

Attendees will significantly improve their knowledge on the correct application of mechanical seals and systems. At the end of the course attendees should be familiar with all aspects of the selection and operation of mechanical seals and systems. Understanding how seals work will allow attendees to obtain improved seal reliability by t... [Read More]

Mechanical Engineering Design (Diploma)

Course Format: Classroom
School/Trainer: Herzing College Scarborough
Training Center(s)/Venue(s): Toronto, Canada
  V

Modernization and streamlining of engineering methods are creating a need to upgrade personal qualifications. New skills and creative ideas are required by all levels of employees in order to survive in a competitive environment.

Graduates of this program will become proficient using computer aided design application packages.

This diploma program will enhance or complement students&,#146, designing and/or drafting skills, through the application of advanced CAD functions and features including 3D design and project management software.

MODULES

COM CFL Computer Fundamentals/Operating Systems
ENG GRP Computer Graphics
ENG DFL Designing Fundamentals &, Blueprints
BUS PRJ Project Planning &, Managing using MS Project
ENG ACT CAD 2-D
ENG AAC Advanced CAD 3-D
ENG INV Inventor
ENG SWO Parts/3D Modeling
ENG SWT Drawing Techniques
ENG ASW Part &, Assembly Modeling

Mechanical Engineering Design (Diploma)

Course Format: Classroom
School/Trainer: Herzing College Oshawa
Training Center(s)/Venue(s): Oshawa, Canada
  V

Modernization and streamlining of engineering methods are creating a need to upgrade personal qualifications. New skills and creative ideas are required by all levels of employees in order to survive in a competitive environment.

Graduates of this program will become proficient using computer aided design application packages.

This diploma program will enhance or complement students&,#146, designing and/or drafting skills, through the application of advanced CAD functions and features including 3D design and project management software.

MODULES

COM CFL Computer Fundamentals/Operating Systems
ENG GRP Computer Graphics
ENG DFL Designing Fundamentals &, Blueprints
BUS PRJ Project Planning &, Managing using MS Project
ENG ACT CAD 2-D
ENG AAC Advanced CAD 3-D
ENG INV Inventor
ENG SWO Parts/3D Modeling
ENG SWT Drawing Techniques
ENG ASW Part &, Assembly Modeling

Mechanical Engineering for Non-Mechanical Engineers Workshop

Course Format: Else
School/Trainer: Best Western Village Park Inn
Training Center(s)/Venue(s): Calgary, Canada
  V

This seminar is for individuals who would like to gain an understanding of the principles of mechanical engineering in a simple and easy to grasp format. This seminar will cover all disciplines of mechanical engineering including thermodynamics, fluid mechanics, heat transfer, and control systems without relying on complex mathematics.

This seminar is a MUST for any individual seeking in-depth knowledge of all the principles and practices of mechanical engineering and mechanical equipment or who simply would like to refresh and enhance their understanding in the area of mechanical engineering.

This seminar will be taught in an easy to understand manner and will utilize illustrated case studies to demonstrate practical examples of applied mechanical engineering. In this seminar the delegates will gain an understanding of the operation and maintenance of all mechanical equipment including the various types of pumps, compressors, valves, and actuators. In addition, this seminar will cover how mechanical equipment operates, the latest advances in maintenance techniques, and it will provide the necessary guidelines and rules to ensure the successful opera... [Read More]

MECHANICAL PROJECTS FOR DIPLOMA AND ENGINEERING Workshop (Certificate)

Course Format: Classroom
School/Trainer: projectavenue.in
Training Center(s)/Venue(s): bangalore, india
  V

PROJECTAVENUE Complete Academic Solutions


Final Year Projects:

Ece,cse,mech,it,tc,isc,electrical,mechanical,telecom,instrumentation,biotech,electronics,communication,networking,digital communication, mechanical, computer science, information science engineering.

Academic/Final Year Project Technologies:
.NET projects , J2EE Projects, J2ME Projects , ANDROID Projects, BLUETOOTH Projects , RTOS Projects, VLSI, FPGA Projects, LABVIEW, CADENCE, WIRELESS Projects, MATLAB Projects , ASP.NET Projects, VB.NET Projects, ROBOTICS Projects , PHP Projects, CLOUD COMPUTING Projects, NETWORKING Projects, ADHOC NETWORKS Projects, IMAGE PROCESSING Projects, BIOMEDICAL Projects.

Final Year Projects For:
1. BE final year studens
2. MCA final year students
3. Engineering final year mini projects
4. MCA final year mini projects
5. BSC final year projects
6. MSc final year projects
7. BCA final year projects
8. DIPLOMA final year projects
9. MTECH final year projects
10. ME final year projects
11. BTECH final year projects

Engineering Branches
�Computer science En... [Read More]

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: Loyola Marymount University
Training Center(s)/Venue(s): Los Angeles, United States
  V

The mechanical engineering graduate program at Loyola Marymount University serves engineers desiring to advance their careers by providing a modern, professionally rigorous and conveniently administered educational program. The Loyola Marymount University mechanical engineering graduate program degrees include:
•The Master of Science in Engineering (M.S.) degree in Mechanical Engineering
•A combined Bachelor of Science (B.S.) and Master of Science in Engineering (M.S.) degrees in Mechanical Engineering (available only for seniors mechanical engineering undergraduates students at Loyola Marymount University).

The department prides itself on making a special effort to offer flexible course sequences and time schedules with convenient evening classes in order to make studies possible for both a full-time working engineer and a full-time student. The program places a strong emphasis on industrial relevance. The faculty have extensive industrial experience and include individuals with worldwide reputations in their fields.

Powerline Mechanic

Course Format: Classroom
School/Trainer: Los Angeles Trade Technical College
Training Center(s)/Venue(s): Los Angeles, United States
  V

Development of basic skills needed to be successful trainees for electrical-related career ladders are emphasized. These skills include: overall safety considerations, power pole climbing skills, knowledge of the basic tools and materials involved with the electrical line crafts, general construction standards, basic rigging principles, and basic electrical theory that is specific to this trade. A 175 hour power pole-climbing certificate of completion is granted to students who successfully complete the course. A component of this course also includes preparation for Civil Service examinations that are likely required for positions at municipal companies.

Los Angeles Trade-Technical College offers various programs for individuals interested in working in the utility industry. The programs enable individuals to be prepared to take the entry level certification for electrical craft helper and entry in to various Utility Lineman Apprentice Program such as: DWP, SCE, SG&,E, PG&,E. It is recommended to begin with the fundamentals certificate of achievement and then move to the larger certificates and then complete the degree programs. The certificates are s... [Read More]

Mechanical Technology CAD (Certificate)

Course Format: Classroom
School/Trainer: Wilbur Wright College
Training Center(s)/Venue(s): Chicago, United States
  V

The Basic Certificate in Mechanical Technology, CAD is awarded to students upon completion of the required program courses.

CAD Technology

CAD TEC 170
CAD Technology II 3



CAD TEC 171
CAD Technology III 3



CAD TEC 172
CAD Technology IV 3



Total Minimum Credit Hours

9

Manufacturing Processes for Metals and Mechanical Systems

Course Format: Online
School/Trainer: IIT School of Applied Technology
Training Center(s)/Venue(s): Bedford Park, Chicago, Wheaton, United States
  V

A broad range of manufacturing processes are studied including casting, forging, rolling, sheet metal processing, machining, joining, and non-traditional methods such as powder, EDM, and additive processes. Particular attention on interrelationships between manufacturing processes and properties developed in the work piece, both intended and unintended. Economic considerations and tradeoffs, as well as computer-integrated manufacturing topics, are also explored.

Mechanical and Aerospace Engineering (Master Degree)

Course Format: Classroom
School/Trainer: IIT Armour College of Engineering
Training Center(s)/Venue(s): Chicago, United States
  V

MMAE has a long history of providing valuable Master&,#146,s level education to engineers across a broad spectrum of topics. Our graduates leave IIT well prepared in their specific areas of focus. Nearly 2000 people have earned a Master of Engineering or Master of Science degree from MMAE.

The Master of Science degree program advances knowledge through post-baccalaureate coursework and state-of-the-art research in preparation for careers in industrial research and development. The M.S. degree is also generally acceptable as a prerequisite for study toward the doctorate.

In line with the department&,#146,s approach to its graduate programs, a student had considerable flexibility, in consultation with his or her program adviser, in formulating an M.S. program.The M.S. in Mechanical and Aerospace Engineering requires the completion of a minimum of 32 credit hours of approved work, which includes six to eight credit hours of thesis research. Before completion of the first semester of graduate study, full-time students should select an area of specialization and a permanent adviser. Graduate students pursuing the M.S. degree on a part-time basis sh... [Read More]

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: University of Illinois at Chicago
Training Center(s)/Venue(s): Chicago, United States
  V

The Department of Mechanical and Industrial Engineering offers graduate programs leading to degrees in Mechanical Engineering at both the master’s and doctoral levels. In addition, the department offers a program leading to the Master of Science in Industrial Engineering and the Doctor of Philosophy in Industrial Engineering and Operations Research, consult the appropriate section of the catalog for more information. The department offers a broad range of courses in the field of mechanical engineering. A rich array of research topics of contemporary interest are structured into four major interdisciplinary research areas of emphasis: Biomedical and Biotechnology, Microsystems and Nanotechnology, Transportation and Infrastructure and Energy and Environment. Some examples of specific research focus areas within these emphasis areas include micro/nanoelectromechanical systems (MEMS/NEMS), micro/nanomanipulation, nanoparticle, nanofluidics, microtransducers and micromechanisms, electrospinning, acoustics, dynamics and vibration, medical imaging and diagnostics, biomechanics and computational mechanics, product design, mechatronics and automatic control, multi-body systems and... [Read More]

Mechanical Drafting

Course Format: Classroom
School/Trainer: Texas Southern University
Training Center(s)/Venue(s): Houston, United States
  V

This course is designed to provide instructional Mechanical Drafters Specialist training. Students gain a general overview of Mechanical Drafting employing Computer Aided Drafting techniques, software, and basic procedures needed when designing /Architectural Drafting. This course also provides a skill development in typing with an emphasis on alphabet, numbers, and symbols with speed and accuracy.

Mechanical Engineering Technology (Master Degree)

Course Format: Classroom
School/Trainer: University of Houston
Training Center(s)/Venue(s): Houston, United States
  V

The Master of Science (MS) in Engineering Technology - Mechanical Engineering Technology Track graduate program builds upon our recognized mechanical baccalaureate degree providing students with highly developed expertise in design and analysis of mechanical systems. With state-of-the-art teaching and research laboratories, the MS program offers courses and cutting-edge research experience in several applied areas including, instrumentation and measurement, biomedical systems, advanced materials design, manufacturing, systems integration, oil and gas applications, and energy. Our students come from diverse undergraduate backgrounds including technology, engineering, computer science, mathematics, and the natural sciences. Under the guidance of research faculty, the MS students are encouraged to complete their degree with a thesis but have the option to replace the thesis with additional class-work and a faculty mentored project. Throughout graduate training, individuals improve oral and written communication skills helping to positioning them to be industry leaders in their fields of specialty.

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: University of Houston
Training Center(s)/Venue(s): Houston, United States
  V

The Graduate Program in Mechanical Engineering provides our students with an educational experience grounded in the engineering sciences and focused on producing a professional capable of systematically applying those sciences to solve real-world problems.

Our program encompasses advanced study and research in the areas of applied mechanics, control of dynamical systems, materials science, thermal and fluid sciences, and biomedical engineering. We are also home to the college&,#146,s interdisciplinary program in Aerospace Engineering. Degree programs include:

the Doctor of Philosophy in Mechanical Engineering.
the Master of Science (thesis and non-thesis programs) in Mechanical Engineering and Aerospace Engineering.
the Master of Science in Subsea Engineering.
Qualified applicants should have backgrounds in engineering, mathematics, and the physical sciences. Part-time graduate study is encouraged, and most of our graduate courses are offered as evening classes (4:00 PM and later).

Wind Turbine Materials and Electro-Mechanical Equipment

Course Format: Classroom
School/Trainer: Houston Community College
Training Center(s)/Venue(s): Houston, United States

Identification and analysis of the components and systems of wind turbine.

Electro-Mechanical Drafting

Course Format: Classroom
School/Trainer: Houston Community College
Training Center(s)/Venue(s): Houston, United States

A basic course including layout and design of electro-mechanical equipment from engineering notes and sketches. Emphasis on drawing of electronics enclosures, interior hardware, exterior enclosure, detailed and assembly drawings with a parts list, and flat-pattern layouts.

Mechanical Engineering

Course Format: Classroom
School/Trainer: Philadelphia University
Training Center(s)/Venue(s): Philadelphia, United States
  V

The Mechanical Engineering program at Philadelphia University provides a broad-based education that emphasizes the fundamentals and basic laws in mechanical, thermal and fluid sciences. The development of math, science and engineering skills in students are addressed in the choice of courses. Engineering design is part of many of the courses from the very first semester. Further emphasis on design is placed in courses such as machine design, design for manufacturability and the two-semester senior design project. Students are given the opportunity to use modern computer aided design and mathematical modeling tools. Students also develop skills to apply theory to design experiments that demonstrate their understanding of fundamental laws in thermodynamics, fluid mechanics and mechatronics.

Automotive Engine Mechanical Repair

Course Format: Classroom
School/Trainer: Community College of Philadelphia
Training Center(s)/Venue(s): Philadelphia, United States
  V

Study of the fundamental theory and repair of automotive gasoline engines. Emphasis is placed upon subject matter recommended by industry through the National Automotive Technicians Education Foundation (NATEF). This course is designed to help prepare students for the Automotive Service Excellence (ASE) certification exam in group 1: Engine Repair. Course incorporates disassembly, inspection, machining and rebuilding of an actual engine in the Automotive Technology Center.

Automotive Suspension and Steering Systems

Course Format: Classroom
School/Trainer: Community College of Philadelphia
Training Center(s)/Venue(s): Philadelphia, United States
  V

Study of the fundamental theory, maintenance and repair of automobile steering and suspension systems. Emphasis is placed upon subject matter recommended by industry through the National Automotive Technicians Education Foundation (NATEF). This course is designed to help prepare students for the Automotive Service Excellence (ASE) certification exam in group 4: Steering and Suspension. It incorporates substantial hands-on training with both demonstrator units and customer vehicles in the Automotive Technology Center.

Mechanical Engineering and Applied Mechanics (Master Degree)

Course Format: Classroom
School/Trainer: The University of Pennsylvania
Training Center(s)/Venue(s): Philadelphia, United States
  V

Graduate study and research in the Department of Mechanical Engineering &, Applied Mechanics at the University of Pennsylvania lead to the Master of Science in Engineering and to the Doctor of Philosophy degrees. Areas of research include biophysics, mechanics of materials, fluid mechanics, design, manufacturing, robotics, thermal sciences, biomechanics and energy conversion. Graduate programs at Penn are organized around Graduate Groups rather than traditional departmental divisions. MEAM Graduate Group is a vibrant, multi-disciplinary group. It consists of faculty from several departments in School of Engineering and Applied Science, Medical School, and Wharton Business School. All faculty in the MEAM Graduate Group have an interest in one or more aspects of Mechanical Engineering.

Pages: 1 2 3 4 5 6 7 8 9 ...


Find Mechanic training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.



- Other Topics -
- Online/E-learning -
Mechanic
Ask for Training
Add Courses