Mechanic Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Mechanic




Total 800 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Injury Biomechanics

Course Format: Classroom
School/Trainer: The University of Pennsylvania
Training Center(s)/Venue(s): Philadelphia, United States
  V

This course is intended as an introduction to investigating the mechanics of injury, from the organism to the tissue level. The students will be exposed to both formal didactic instruction and selected field work. The course will cover principles in continuum and analytical mechanics, and will use application in injury research to illustrate these concepts. The course will be divided into three major units. The first unit will be an introduction to variational principles of mechanics and calculus of variations, and will apply these concepts to injury problems (e.g., occupant kinematics during a collision, vehicle kinematics, impact to padded surfaces). Special emphasis will be placed on converting a system input into a body response. The second unit of the course will be used to discuss the effect of gross body motion on tissue and organ mechanical response. Material models of biological tissue will be discussed, and examples relating body motion to tissue response will be reviewed. In the final unit of this course, students are required to research and review a problem of their choice and present a report detailing an engineering based solution to the problem.

Biomechanics and Biotransport

Course Format: Classroom
School/Trainer: The University of Pennsylvania
Training Center(s)/Venue(s): Philadelphia, United States
  V

The course is intended as an introduction to continuum mechanics in both solid and fluid media, with special emphasis on the application to biomedical engineering. Once basic principles are established, the course will cover more advanced concepts in biosolid mechanics that include computational mechanics and bio-constitutive theory. Applications of these advanced concepts to current research problems will be emphasized.

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: Temple University College of Engineering
Training Center(s)/Venue(s): Philadelphia, United States
  V

The Department of Mechanical Engineering offers a Master of Science in Mechanical Engineering. Courses are organized into key areas of research: alternative and renewable energy, biomechanics, material science, dynamical systems &, control and thermal &, fluid science.

The Department of Mechanical Engineering offers graduate level education and research concentrations in the following:
Advanced Materials
Biomechanics
Dynamic systems and controls
Energy systems
Thermal and Fluid Engineering

Students can concentrate in any one of the above areas by taking appropriate courses and conducting research leading to a Master of Science (MS) in Mechanical Engineering.

The departments research facilities include a Composites laboratory, subsonic wind tunnel, flow visualization laboratory, data acquisition and controls laboratory, bioengineering and biomaterials center, biomechanics laboratory, biofluidics laboratory.

A large selection of courses is offered in the areas of research specialization. In addition to courses offered by the department, the students are encouraged to take courses outside the departme... [Read More]

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: Arizona State University - Tempe Campus
Training Center(s)/Venue(s): Tempe, United States
  V

The mechanical engineering faculty offer a graduate program leading to the MSE in mechanical engineering. The MSE is the nonthesis master&,#146,s degree in mechanical engineering and requires either a comprehensive exam or an applied project as a culminating event. A number of wide and diverse research areas may be pursued. All of the graduate programs stress a sound foundation leading to a specialized area of study.

Suspension, Steering & Brakes (Certificate)

Course Format: Classroom
School/Trainer: GateWay Community College
Training Center(s)/Venue(s): Phoenix, United States
  V

Learn to work with suspension, steering and brakes by developing your skill set in this specialty area of automotive technology.

Jobs are found in car dealerships, independent garages, private companies, government agencies, or create your own path as a self-employed automotive technician in this area of expertise.

Although many schools offer seemingly similar degree and certification options, not all schools are accredited. In many instances, accreditation of the degree or program you complete may be required in order to become certified to work in the field.

Automotive Technology (Certificate)

Course Format: Classroom
School/Trainer: GateWay Community College
Training Center(s)/Venue(s): Phoenix, United States
  V

The Associate in Applied Science (AAS) in Automotive Technology program is designed to prepare students for employment as automotive technicians (mechanics). Instruction is given in both the theoretical and practical aspects of automotive operation, maintenance and service. Instruction includes directed systems (both conventional and electronic), brakes, air conditioning, automotive electricity, tune-up and emission control, suspension, and steering systems. Modern laboratory facilities, fully equipped with the latest equipment, provide students with excellent opportunities for pre-employment experience.

The Certificate of Completion (CCL) in Automotive Technology program is designed to prepare students for employment as automotive technicians (mechanics). Instruction is given in both the theoretical and practical aspects of automotive operation, maintenance and service. Instruction includes directed systems (both conventional and electronic), brakes, air conditioning, automotive electricity, tune-up and emission control, suspension, and steering systems. Modern laboratory facilities, fully equipped with the latest equipment, provide students with excellent op... [Read More]

Excavation, Trenching and Soil Mechanics Workshop

Course Format: Classroom
School/Trainer: UTA - Division for Enterprise Development
Training Center(s)/Venue(s): Austin, Arlington, Houston, United States
  V

This course covers the OSHA Excavation Standards and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears and engineering rods.

AUTOMOTIVE ENGINEERING

Course Format: Classroom
School/Trainer: The University of Texas at Arlington
Training Center(s)/Venue(s): Arlington, United States
  V

Introduction to automotive engine types and performance, drive train modeling and vehicle loading characteristics, fueling requirements, fuel injection systems, tire characteristics and modeling, suspension characteristics and handling, braking systems and requirements. Course taught through lecture, student presentations and student design projects.

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: The University of Texas at Arlington
Training Center(s)/Venue(s): Arlington, United States
  V

The graduate program provides opportunities for professional development in such forms as: instructional courses to enhance technical competence in areas of mechanical engineering practice, training through a variety of experiences in design, development, research, experimentation, and/or analysis in joint efforts with faculty and peers, specialized courses of study required for entry into career fields allied to the mechanical engineering discipline, guided individual study under faculty supervision, and supportive coursework for programs leading to careers that require interdisciplinary competence.

A student with aid from a faculty advisor plans a program that will be consistent with his or her technical interests and the available facilities and course offerings. Typically, programs are classified as:
•Thermal Science
•Fluid Science
•Mechanical Design and Manufacturing
•Solid Mechanics and Structures
•Controls and Systems

Admission Requirements

Admission Criteria for Master’s and Ph.D. Programs

Admission to the graduate program in ME is based on equal weighting of the following five criteria:
1.A... [Read More]

MICROELECTROMECHANICAL SYSTEMS (MEMS) AND DEVICES

Course Format: Classroom
School/Trainer: The University of Texas at Arlington
Training Center(s)/Venue(s): Arlington, United States

Develops the basics for microelectromechanical devices and systems including microsensors, and micromotors, principles of operation, different micromachining techniques, and thin-film technologies as they apply to MEMS.

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: University of Texas at Dallas
Training Center(s)/Venue(s): Dallas, United States
  V

The program leading to the master of science in mechanical engineering prepares both recent baccalaureate graduates and experienced mechanical engineers for advanced micro-scale and nano-scale mechanical and thermal design and development. Designed to accommodate the needs of working engineers who wish to continue their education, the program offers courses at times convenient for students employed on a full-time basis.

grad studentAll students must have an academic advisor and an approved degree plan. These are based upon the student’s choice of concentration, Dynamic Systems &, Controls (DSC), Manufacturing &, Design Innovation (MDI), Mechanics &, Materials (MM), Thermal &, Fluid Sciences (TFS)). Courses taken without advisor approval will not count towards the 33 semester-hour requirement. Successful completion of an approved course of studies leads to the M.S.M.E. degree.

The M.S.M.E. program has both a thesis and a non-thesis option. All part-time M.S.M.E. students will be assigned initially to the non-thesis option. Those wishing to elect the thesis option may do so by obtaining the approval of a faculty thesis supervisor.
Read More]

Mechanical Engineering (Master Degree)

Course Format: Online
School/Trainer: SMU Lyle School of Engineering
Training Center(s)/Venue(s): Dallas, United States
  V

Mechanical Engineering is a diverse, dynamic, and exciting field. Because of the wide-ranging technical background attained, the mechanical engineers have the highest potential for employment after graduation with exceptional mobility necessary for professional growth even during bear-market conditions.

The mechanical engineering department at SMU has a long tradition of offering a superb engineering education within an environment fostering creativity and innovation. Small classes, a trademark of our program, not only provides for strong mentoring but it also foments academic excellence through cooperation and team work.

Our exceptionally qualified faculty members are continuously engaged in cutting-edge research projects, facilitation the attainment and transmission of knowledge to the students. Leading by example, through encouragement and dedication, our faculty is committed to the success of every student, during their tenure at SMU and after graduation.

Requirements include the completion of ten graduate level courses (30 TCH), or the completion of eight courses (24 TCH) and a Thesis. The Master Thesis must attain a certain level of... [Read More]

Electrical, Plumbing and Mechanical Codes

Course Format: Classroom
School/Trainer: San Diego Mesa College
Training Center(s)/Venue(s): San Diego, United States
  V

This course is a practical study of the application and interpretation of the California Electrical Code, the California Plumbing Code, the California Mechanical Code, and their relation to other California building codes and their source model codes. This course is designed for students in Architecture, Interior Design, Building Construction Technology, designers, inspectors, contractors, trades people and others interested in building codes.

BIM

Course Format: Classroom
School/Trainer: Cosumnes River College
Training Center(s)/Venue(s): Sacramento, United States
  V

This course instructs students in the beginning level of Building Information Modeling as it relates to parametric modeling and Green Building/LEED® (Leadership in Energy and Environmental Design) for &,#146,Building Systems&,#146, drawing and design using software such as AutoDesk&,#146,s Revit® MEP. The content is a first level introduction course of data-generated Parametric Building Modeling software for Mechanical, Electrical, and Plumbing systems, illustrating how the MEP (Mechanical-Electrical-Plumbing) software drawing designs integrate with Revit® Architecture and/or Revit® Structure.

Undercar Service (Certificate)

Course Format: Classroom
School/Trainer: American River College
Training Center(s)/Venue(s): Sacramento, United States
  V

This certificate provides students with knowledge for entry-level careers in automotive suspension, brake and exhaust repair facilities.

Requirements for Certificate

AT 100 - Technical Basics for the Automotive Professional
AT 110 - Automotive Brakes
AT 145 - Automotive Exhaust System
AT 180 - Automotive Data Acquisition
AT 311 - Suspension and Steering Systems

Automotive Service Technician (Certificate)

Course Format: Classroom
School/Trainer: American River College
Training Center(s)/Venue(s): Sacramento, United States
  V

This program prepares the student for an entry level position in the automotive industry in the fields of Auto Technician, Auto/Truck Specialist, Field Service, Sales Representative and Tune-up and Electrical Specialist. It also prepares the student for Automotive Service Excellence (ASE) certifications in Automotive Brakes, Manual Drive Trains and Axles, Heating and Air Conditioning Systems, Suspensions and Steering Systems, Electrical Systems, Automatic Transmission and Transaxles, and Automotive Engine Repair.

Requirements for Degree or Certificate

AT 100 - Technical Basics for the Automotive Professional
AT 105 - Mathematics for Automotive Technology
AT 110 - Automotive Brakes
AT 130 - Manual Drive Trains and Axles
AT 180 - Automotive Data Acquisition
AT 310 - Heating and Air Conditioning Systems
AT 311 - Suspension and Steering Systems
AT 312 - Automotive Electrical Systems
AT 313 - Automatic Transmission and Transaxles
AT 314 - Automotive Engine Repair

Mechanical Engineering

Course Format: Classroom
School/Trainer: Anderson University
Training Center(s)/Venue(s): Anderson, United States
  V

Students in Mechanical Engineering will learn the principles and skills necessary to understand how heat and mechanical power can be used in the design and operation of machines and other tools. Graduates of the Mechanical Engineering program will have a diverse background, with skills that can be transferred to other areas such as Chemical Engineering and Materials Science.

Students take courses in math, science, and engineering in order to learn how to solve the complex technological problems that face society. The Mechanical Engineering curriculum provides a broad background in the different areas of the discipline such as heat transfer, machine design, control systems, and manufacturing finance. Additionally, students will have an opportunity to discover the various specialty areas of the major through different elective courses including fracture mechanics, machinery dynamics, and applications to the aerospace industry.

Graduates of this program will be given a solid background in the theoretical and applied study of Mechanical Engineering, having been exposed to various techniques and instrumentation. Students will also have the opportunity t... [Read More]

Auto Maintenance and Detailing

Course Format: Classroom
School/Trainer: J. Everett Light Career Center
Training Center(s)/Venue(s): Indianapolis, United States
  V

This class will be suited for students who like to work on automobiles, but are not interested in major auto repair. Students will learn the techniques used in basic auto maintenance shops. Procedures to safely and proficiently change engine oil, replace other necessary fluids, lubricate chassis?and other basic car maintenance topics will be covered.

Students will learn to do simple brake shoe changes and brake adjustments. Exhaust system function and repair will also be a topic of instruction. Radio installation and other interior customizing details will be covered in the second semester.

If a student wants to continue with an automotive related field for the second year, he/she should consider Auto Service Technology.

Mechanical Engineering (Master Degree)

Course Format: Classroom
School/Trainer: Santa Clara University
Training Center(s)/Venue(s): Santa Clara, United States
  V

The Mechanical Engineering Department is dedicated to delivering up-to-date, high quality courses across a broad range of the discipline to meet the needs of both part- and full-time graduate students. These courses are concentrated in five technical areas:
1.Dynamics and Controls
2.Materials Engineering
3.Mechanical Design

4.Robotics and Mechatronic Systems
5.Thermofluids

Educational efforts are channeled to expand the skills of prospective and practicing engineers not only in understanding fundamentals, but also in developing competence in analyzing engineering systems. The department offers graduate degrees at the Master&,#146,s, Engineer&,#146,s, and Doctorate levels, as well as Certificates.

All students in the Mechanical Engineering MS Program are required to take MECH 200 and 201 or MECH 202 at the beginning of their program of studies and must complete at least one sequence of two courses in applied mathematics or an equivalent four unit course. All students must also satisfy the requirements of the graduate core.

Students must select one of the five options and develop a program of studies with... [Read More]

Commercial Transport Vehicle Mechanic

Course Format: Classroom
School/Trainer: Vancouver Community College
Training Center(s)/Venue(s): Vancouver, Canada
  V

Designed for the apprentice currently working in the commercial transport industry, this technical training program will give you a thorough and up-to-date training experience. Students train in classrooms and the well-equipped diesel equipment lab at VCC&,#146,s Broadway campus, with ample opportunity to practise their skills and to demonstrate their knowledge. Technical training at VCC is designed to meet the needs of both the student and industry by providing thorough and up-to-date training. Upon completion, apprentices return to the industry with an increased, comprehensive skill set.

Pages: 1 2 3 4 5 6 7 8 9 10 ...


Find Mechanic training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
Schools can use this unlimited free web marketing service by submitting their course descriptions and school introductions. Two outbound links will be granted to each posting.



- Other Topics -
- Online/E-learning -
Mechanic
Ask for Training
Add Courses