Routing Training Courses and Workshops

Schools providing training courses, certificates, diplomas or degree programs of Network Routing Technology




Total 672 training courses and degree programs available around the world.

United States - United Kingdom - Canada - Australia - India

Popular courses:
Implementing Cisco IP Routing
Junos Multicast Routing
Junos Intermediate Routing
Junos Routing Essentials
Advanced Junos Enterprise Routing
Deploying Cisco Service Provider Network Routing


Junos Multicast Routing

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This two-day course is designed to provide students with detailed coverage of multicast protocols including Internet Group Management Protocol (IGMP), Protocol Independent Multicast–Dense Mode (PIM-DM), Protocol Independent Multicast–Sparse Mode (PIM-SM), and Multicast Source Discovery Protocol (MSDP).

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and monitoring device and protocol operations. This course uses Juniper Networks MX Series 3D Universal Edge Routers for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS.

Day 1

Chapter 1: Course Introduction

Chapter 2: Introduction to Multicast
Overview of Multicast
Multicast Addresses
Reverse Path Forwarding
Internet Group Management Protocol
Lab 1: Implementing a Baseline Network

Chapter 3: Multicast Routing Protocols
Overview of Multicast Routing Protocols
PIM Dense Mode Operation
Lab 2: PIM Dense Mode
PIM Sparse Mode Operation
Read More]

Advanced Junos Enterprise Routing

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This three-day course is designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, Border Gateway Protocol (BGP), class of service (CoS), and multicast is strongly emphasized. Through demonstrations and hands-on labs , students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations.



This course uses Juniper Networks SRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on the Junos OS Release 12.1X46-D20.5.

After successfully completing this course, you should be able to:
Describe the various OSPF link-state advertisement (LSA) types.
Explain the flooding of LSAs in an OSPF network.
Describe the shortest-path-first (SPF) algorithm.
Describe OSPF area types and operations.
Configure various OSPF area types.
Summarize and restrict routes.
Identify scenarios r... [Read More]

Deploying Cisco Service Provider Network Routing

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This 5-day course is designed to provide service provider professionals with the knowledge and skills required to implement advanced routing when providing scalability on Cisco routers connected to LANs and WANs.

Content

Service Provider Routing
Understanding Service Provider Routing Protocols

Implement OSPF in the Service Provider Network
Introducing OSPF Routing
Understanding OSPF Operation
Implementing OSPF Routing
Implementing OSPF Special Area Types

Implement Integrated IS-IS in the Service Provider Network
Introducing IS-IS Routing
Implementing Integrated IS-IS Routing

Implement BGP in the Service Provider Network
Enterprise Connectivity to Service Providers
Introducing BGP Routing
Implementing Basic BGP Routing

Routing Protocol Tools and Route Manipulation
Introducing Routing Protocol Tools
Introducing Route Maps and Routing Policy Language
Implementing Route Redistribution
Influencing BGP Route Selection

Labs:
Hardware Lab 1: Implement OSPF Routing
Hardware Lab 2: Implement OSPF Special Area Type... [Read More]

Deploying Cisco Service Provider Network Routing v1.2

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

Service Provider Routing
Understanding Service Provider Routing Protocols

Implement OSPF in the Service Provider Network
Introducing OSPF Routing
Understanding OSPF Operation
Implementing OSPF Routing
Implementing OSPF Special Area Types

Implement Integrated IS-IS in the Service Provider Network
Introducing IS-IS Routing
Implementing Integrated IS-IS Routing

Implement BGP in the Service Provider Network
Enterprise Connectivity to Service Providers
Introducing BGP Routing
Implementing Basic BGP Routing

Routing Protocol Tools and Route Manipulation
Introducing Routing Protocol Tools
Introducing Route Maps and Routing Policy Language
Implementing Route Redistribution
Influencing BGP Route Selection

Labs:
Hardware Lab 1: Implement OSPF Routing
Hardware Lab 2: Implement OSPF Special Area Types
Hardware Lab 3: Implement Integrated IS-IS Routing
Hardware Lab 4: Implement Basic BGP Routing
Hardware Lab 5: Implement Route Redistribution
Hardware Lab 5: Influence BGP Route Selection

Implementing Cisco IP Routing

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This 5 day course is designed to provide professionals working with medium to large networks with the skills and knowledge required to incorporate advanced routing concepts when implementing scalability for Cisco routers that are connected to LANs and WANs. Delegates will be able to dramatically increase the number of routers and sites using these techniques instead of redesigning the network when additional sites or wiring configurations are added.Labs are an important feature of this course with 2 different types of labs being used to aid learning, discovery labs are instructor guided labs through which students explore new topics in an interactive way, the challenge Labs are designed to test students understanding of the topics being taught and to provide vital hands-on practice.

CCNA Routing and Switching (Certificate)

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

Global Knowledge’s accelerated CCNA Bootcamp is an intensive program designed to teach learners how to install, operate, configure and verify a basic IPv4 and IPv6 network including configuring a LAN switch, configuring an IP router, connecting to a WAN and identifying basic security threats.

Labs are core to understanding concepts taught. Students will have 120 hours of lab access. This is accessible over a 180 day period including classroom time, ensuring students are able to perform basic troubleshooting steps in an enterprise branch office network.

An ideal course for students looking to achieve CCNA Routing and Switching Certification.

After you complete this course you should be able to:


Install, operate and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security.
Describe the effects of new technologies such as IoE, IoT, IWAN and SDN on network evolution.

CCIE Routing & Switching Written v5 (Certificate)

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This instructor-led theory course is designed to build upon the knowledge gained from the professional level routing and switching or service provider certifications. The focus will be on refreshing and enhancing your knowledge on the key topics covered in the version 5 written exam: Network Principles, Layer 2 technologies, Layer 3 Technologies, VPN Technologies, Infrastructure Security and Infrastructure Services.

After attending this course you should be able to:
Confidently sit the CCIE® Routing &, Switching Written Exam 400-101.
Detail the theory behind configuring complex Routing and Switching networks.
Have an enhanced knowledge of Cisco Routing &, Switching technology and methodology.

Configuring BGP on Cisco Routers

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

BGP Overview
Introducing BGP
Understanding BGP Path Attributes
Establishing BGP Sessions
Processing BGP Routes
Configuring Basic BGP
Monitoring and Troubleshooting BGP

BGP Transit Autonomous Systems
Working with a Transit AS
Interacting with IBGP and EBGP in a Transit AS
Forwarding Packets in a Transit AS
Monitoring and Troubleshooting IBGP in a Transit AS

Route Selection using Policy Controls
Using Multihomed BGP Networks
Employing AS ?Path Filters
Filtering with Prefix-Lists
Using Outbound Route Filtering
Applying Route-Maps as BGP Filters
Implementing Changes in BGP Policy

Route Selection Using Attributes
Influencing BGP Route Selection with Weights
Setting BGP Local Preference
Using AS-Path Prepending
Understanding the BGP Multi-Exit Discriminator
Addressing BGP Communities

Customer-to-Provider Connectivity with BGP
Understanding Customer-to-Provider Connectivity Requirements
Implementing Customer Connectivity Using Static Routing
Connecting a Multihomed Customer to a Single Service Provider
Connecti... [Read More]

Brocade Network Industry Protocol

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V

This Instructor-led course provides an extensive view of networking concepts and technologies while exploring the standardized protocols used in networks today. It can also serve as a foundational course preparing students that are entering into the IP networking field needing a working knowledge of a networks structure and function. Studies include the physical and logical understanding of basic networking operations, Layer 2/3 addressing and standardized multi-vendor supported core, management and monitoring protocols. Multi-cast forwarding using PIM and IGMP protocols are discussed and an overview of popular WAN technologies deployed past in present.

Objectives
Upon successful completion of this course, the student should be able to:
Describe the OSI reference model and the function of each layer
Describe the TCP/IP model
Explain end-to-end packet flow
Describe the differences between, an L2 switch, and an L3 switch/router
Describe Layer 2 functionality and its supported protocols (VLAN, STP, 802.1Q, LACP, physical address)
Describe Layer 3 concepts (IPv4v6 design, addressing, CIDR, VLSM)
Describe IP routing concepts a... [Read More]

Brocade 5600 vRouter Fundamentals

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V


This instructor-led course with hands-on labs, includes information on installing, configuring, and managing the Brocade 5600 vRouter. Other topics include, configuring DNS, DHCP, NAT, and firewall, creating site-to-site VPNs using IPsec or OpenVPN, and configuring the 5600 vRouter in a high availability scenario.

After you complete this course you will be able to:
Download, install, and upgrade vRouter software
Describe options for CLI access
Explain the configuration file structure
Configure features including, device management, loopback interfaces, host and domain names, and time synchronization
Configure Ethernet and VLAN interfaces
Configure static routes including default, backup, and floating static routes
Describe and configure DNS and DHCP
Describe and configure VPNs using OpenVPN or IPsec
Configure the 5600 vRouter to communicate with an SNMP server
Configure the 5600 vRouter to communicate with an external Syslog server
Use logs and monitoring to troubleshoot configuration and operational problems
Describe how VRRP works and configure VRRP on the 5600 vRouter

Troubleshooting IP Networks

Course Format: Classroom
School/Trainer: Global Knowledge USA
Training Center(s)/Venue(s): Arlington, Atlanta, Cary, Irving, Morristown, New York City, Santa Clara, Schaumburg, Seattle, United States
  V


This course is designed to provide students with the tools and abilities to perform troubleshooting and data gathering techniques in IP networks containing Brocade FastIron and NetIron products.

Content

Module 1: Course Introduction

Module 2: Troubleshooting Essentials

Module 3: Debugging
Lab 3: Discover Lab Topology

Module 4: Layer 1 Troubleshooting

Module 5: Layer 2 Forwarding

Module 6: Layer 2 Loop Prevention Protocols
Lab 6-1: Troubleshooting Spanning Tree
Lab 6-2: Troubleshooting High CPU Issues

Module 7: L2/L3 Redundancy Protocols
Lab 7: Troubleshooting Link Aggregation

Module 8: Layer 3 Forwarding

Module 9: Layer 3 Routing Protocol Troubleshooting
Lab 9-1: Troubleshooting OSPF
Lab 9-2: Troubleshooting BGP

Module 10: Multicast Troubleshooting
Lab 10: Troubleshooting IP Multicast

Module 11: Device Access and Security Issues

Module 12: Software Upgrade and Licensing Issues

Junos Multicast Routing

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This two-day course is designed to provide students with detailed coverage of multicast protocols including Internet Group Management Protocol (IGMP), Protocol Independent Multicast–Dense Mode (PIM-DM), Protocol Independent Multicast–Sparse Mode (PIM-SM), and Multicast Source Discovery Protocol (MSDP).

Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and monitoring device and protocol operations. This course uses Juniper Networks MX Series 3D Universal Edge Routers for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS.

Day 1

Chapter 1: Course Introduction

Chapter 2: Introduction to Multicast
Overview of Multicast
Multicast Addresses
Reverse Path Forwarding
Internet Group Management Protocol
Lab 1: Implementing a Baseline Network

Chapter 3: Multicast Routing Protocols
Overview of Multicast Routing Protocols
PIM Dense Mode Operation
Lab 2: PIM Dense Mode
PIM Sparse Mode Operation
Read More]

Advanced Junos Enterprise Routing

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This three-day course is designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, Border Gateway Protocol (BGP), class of service (CoS), and multicast is strongly emphasized. Through demonstrations and hands-on labs , students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations.



This course uses Juniper Networks SRX Series Services Gateways for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on the Junos OS Release 12.1X46-D20.5.

After successfully completing this course, you should be able to:
Describe the various OSPF link-state advertisement (LSA) types.
Explain the flooding of LSAs in an OSPF network.
Describe the shortest-path-first (SPF) algorithm.
Describe OSPF area types and operations.
Configure various OSPF area types.
Summarize and restrict routes.
Identify scenarios r... [Read More]

Deploying Cisco Service Provider Network Routing

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This 5-day course is designed to provide service provider professionals with the knowledge and skills required to implement advanced routing when providing scalability on Cisco routers connected to LANs and WANs.

Content

Service Provider Routing
Understanding Service Provider Routing Protocols

Implement OSPF in the Service Provider Network
Introducing OSPF Routing
Understanding OSPF Operation
Implementing OSPF Routing
Implementing OSPF Special Area Types

Implement Integrated IS-IS in the Service Provider Network
Introducing IS-IS Routing
Implementing Integrated IS-IS Routing

Implement BGP in the Service Provider Network
Enterprise Connectivity to Service Providers
Introducing BGP Routing
Implementing Basic BGP Routing

Routing Protocol Tools and Route Manipulation
Introducing Routing Protocol Tools
Introducing Route Maps and Routing Policy Language
Implementing Route Redistribution
Influencing BGP Route Selection

Labs:
Hardware Lab 1: Implement OSPF Routing
Hardware Lab 2: Implement OSPF Special Area Type... [Read More]

Deploying Cisco Service Provider Network Routing v1.2

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

Service Provider Routing
Understanding Service Provider Routing Protocols

Implement OSPF in the Service Provider Network
Introducing OSPF Routing
Understanding OSPF Operation
Implementing OSPF Routing
Implementing OSPF Special Area Types

Implement Integrated IS-IS in the Service Provider Network
Introducing IS-IS Routing
Implementing Integrated IS-IS Routing

Implement BGP in the Service Provider Network
Enterprise Connectivity to Service Providers
Introducing BGP Routing
Implementing Basic BGP Routing

Routing Protocol Tools and Route Manipulation
Introducing Routing Protocol Tools
Introducing Route Maps and Routing Policy Language
Implementing Route Redistribution
Influencing BGP Route Selection

Labs:
Hardware Lab 1: Implement OSPF Routing
Hardware Lab 2: Implement OSPF Special Area Types
Hardware Lab 3: Implement Integrated IS-IS Routing
Hardware Lab 4: Implement Basic BGP Routing
Hardware Lab 5: Implement Route Redistribution
Hardware Lab 5: Influence BGP Route Selection

Implementing Cisco IP Routing

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This 5 day course is designed to provide professionals working with medium to large networks with the skills and knowledge required to incorporate advanced routing concepts when implementing scalability for Cisco routers that are connected to LANs and WANs. Delegates will be able to dramatically increase the number of routers and sites using these techniques instead of redesigning the network when additional sites or wiring configurations are added.Labs are an important feature of this course with 2 different types of labs being used to aid learning, discovery labs are instructor guided labs through which students explore new topics in an interactive way, the challenge Labs are designed to test students understanding of the topics being taught and to provide vital hands-on practice.

CCNA Routing and Switching (Certificate)

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

Global Knowledge’s accelerated CCNA Bootcamp is an intensive program designed to teach learners how to install, operate, configure and verify a basic IPv4 and IPv6 network including configuring a LAN switch, configuring an IP router, connecting to a WAN and identifying basic security threats.

Labs are core to understanding concepts taught. Students will have 120 hours of lab access. This is accessible over a 180 day period including classroom time, ensuring students are able to perform basic troubleshooting steps in an enterprise branch office network.

An ideal course for students looking to achieve CCNA Routing and Switching Certification.

After you complete this course you should be able to:


Install, operate and troubleshoot a medium-sized network, including connecting to a WAN and implementing network security.
Describe the effects of new technologies such as IoE, IoT, IWAN and SDN on network evolution.

CCIE Routing & Switching Written v5 (Certificate)

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This instructor-led theory course is designed to build upon the knowledge gained from the professional level routing and switching or service provider certifications. The focus will be on refreshing and enhancing your knowledge on the key topics covered in the version 5 written exam: Network Principles, Layer 2 technologies, Layer 3 Technologies, VPN Technologies, Infrastructure Security and Infrastructure Services.

After attending this course you should be able to:
Confidently sit the CCIE® Routing &, Switching Written Exam 400-101.
Detail the theory behind configuring complex Routing and Switching networks.
Have an enhanced knowledge of Cisco Routing &, Switching technology and methodology.

Configuring BGP on Cisco Routers

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

BGP Overview
Introducing BGP
Understanding BGP Path Attributes
Establishing BGP Sessions
Processing BGP Routes
Configuring Basic BGP
Monitoring and Troubleshooting BGP

BGP Transit Autonomous Systems
Working with a Transit AS
Interacting with IBGP and EBGP in a Transit AS
Forwarding Packets in a Transit AS
Monitoring and Troubleshooting IBGP in a Transit AS

Route Selection using Policy Controls
Using Multihomed BGP Networks
Employing AS ?Path Filters
Filtering with Prefix-Lists
Using Outbound Route Filtering
Applying Route-Maps as BGP Filters
Implementing Changes in BGP Policy

Route Selection Using Attributes
Influencing BGP Route Selection with Weights
Setting BGP Local Preference
Using AS-Path Prepending
Understanding the BGP Multi-Exit Discriminator
Addressing BGP Communities

Customer-to-Provider Connectivity with BGP
Understanding Customer-to-Provider Connectivity Requirements
Implementing Customer Connectivity Using Static Routing
Connecting a Multihomed Customer to a Single Service Provider
Connecti... [Read More]

Brocade Network Industry Protocol

Course Format: Classroom
School/Trainer: Global Knowledge Canada
Training Center(s)/Venue(s): Halifax, Mississauga, Montreal, Ottawa, Toronto, Winnipeg, Canada
  V

This Instructor-led course provides an extensive view of networking concepts and technologies while exploring the standardized protocols used in networks today. It can also serve as a foundational course preparing students that are entering into the IP networking field needing a working knowledge of a networks structure and function. Studies include the physical and logical understanding of basic networking operations, Layer 2/3 addressing and standardized multi-vendor supported core, management and monitoring protocols. Multi-cast forwarding using PIM and IGMP protocols are discussed and an overview of popular WAN technologies deployed past in present.

Objectives
Upon successful completion of this course, the student should be able to:
Describe the OSI reference model and the function of each layer
Describe the TCP/IP model
Explain end-to-end packet flow
Describe the differences between, an L2 switch, and an L3 switch/router
Describe Layer 2 functionality and its supported protocols (VLAN, STP, 802.1Q, LACP, physical address)
Describe Layer 3 concepts (IPv4v6 design, addressing, CIDR, VLSM)
Describe IP routing concepts a... [Read More]

Pages: 1 2 3 4 5 6 ...


Find Routing training courses, certificates, diplomas and degrees in Countries:



Australia - Canada - India - Indonesia - Ireland - Malaysia - New Zealand
Pakistan - Philippines - Singapore - South Africa - United Arab Emirates
United Kingdom - United States



Tips:
If you can not find a training course suitable for you instantly, you can leave your training request here and let trainers contact you later.



- Other Topics -
- Online/E-learning -
Routing
Ask for Training
Add Courses